IKEA TROFAST 505.246.90 Frame instructions manual

The IKEA TROFAST 505.246.90 is a modular storage frame designed for TROFAST storage boxes, featuring a sturdy pine wood construction, multiple configuration options, and a child-friendly design. Below are key sections for safety, parts list, assembly, installation, usage, care, and troubleshooting.

1. Parts & Tools Checklist 2. Safety Information 3. Assembly Instructions 4. Installation & Mounting 5. Specifications 6. Configuration Options 7. Using with TROFAST Boxes 8. Care & Maintenance 9. Disassembly & Moving 10. Warranty Information 11. Troubleshooting

Parts & Tools Checklist

Before assembly, verify all parts are included. Key components: Frame sides, shelves, connectors, screws, wall attachment device.

Part NumberDescriptionQuantity
101Frame side panel (pine)2
102Shelf board3
103Connector dowel8
104Cam lock screw8
105Wall attachment bracket1 set
106Allen key1

Tools needed: Phillips screwdriver, hammer (for dowels), level.

Safety Information

Read all instructions before assembly. Keep children away during assembly.

  1. Stability warning: This furniture can tip over. Always secure to wall using provided wall attachment device.
  2. Weight limit: Do not exceed 50 lbs (22.7 kg) per shelf. Distribute weight evenly.
  3. Assembly surface: Use a soft, clean surface to avoid scratching parts.
  4. Check hardware: Ensure all screws and connectors are tightened securely.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure to wall.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until all parts are aligned.

  1. Step 1: Lay frame side panels flat. Insert dowels into pre-drilled holes on inner sides.
  2. Step 2: Position shelf boards between side panels, aligning with dowels.
  3. Step 3: Insert cam lock screws into designated holes on side panels. Turn clockwise with Allen key until tight.
  4. Step 4: Check that all shelves are level and frame is square.
  5. Step 5: Attach wall brackets to back of frame using provided screws.

Tip: Assemble with a partner for easier handling.

Installation & Mounting

Must be attached to wall studs for stability.

  1. Position frame against wall in desired location.
  2. Use level to ensure frame is straight.
  3. Mark screw holes from wall bracket onto wall.
  4. Drill pilot holes into wall studs.
  5. Secure frame to wall using appropriate screws for your wall type (not included for all wall types).
  6. Tighten securely and test stability.

CAUTION! If not attached to wall, furniture may tip over causing injury.

Specifications

Configuration Options

Shelves can be arranged in different configurations.

Standard configuration: Three evenly spaced shelves.

Alternate configurations:

  1. Remove middle shelf for taller storage boxes.
  2. Use only two shelves for larger item storage.
  3. Combine multiple frames side-by-side (purchase additional frames).

Note: When changing configuration, ensure frame remains securely attached to wall.

Using with TROFAST Boxes

Designed specifically for TROFAST storage system.

  1. Select appropriate TROFAST boxes (sold separately).
  2. Place boxes on shelves - they should fit snugly within frame width.
  3. For safety, do not stack boxes above frame height.
  4. Label boxes for easy organization.
  5. Teach children how to remove and replace boxes safely.

Recommended box sizes: 11 3/4" x 17 3/4" (30x45 cm) or 11 3/4" x 11 3/4" (30x30 cm).

Care & Maintenance

Clean with damp cloth; avoid harsh chemicals.

  1. Daily cleaning: Wipe with dry or slightly damp cloth.
  2. Stain removal: Use mild soap solution; dry immediately.
  3. Wood care: Avoid excessive moisture which can warp wood.
  4. Hardware check: Periodically tighten screws and check wall attachment.

CAUTION! Do not use abrasive cleaners or solvents.

Disassembly & Moving

To move or store, follow reverse assembly steps.

  1. Remove all boxes and items from frame.
  2. Remove wall attachment screws.
  3. 3. Using Allen key, loosen cam lock screws in reverse order.
  4. Gently separate parts, being careful not to force connections.
  5. Store hardware in labeled bag for reassembly.
  6. Protect wood surfaces during transport.

Note: Reattach to wall immediately after reassembly in new location.

Warranty Information

IKEA limited warranty applies. See IKEA warranty card for details.

Troubleshooting

ProblemPossible CauseSolution
Frame wobblesUneven floor; loose screwsCheck floor level; tighten all screws and wall attachments.
Shelf not levelDowels not fully insertedDisassemble section and reinsert dowels properly.
Gaps between partsCam locks not tightenedTurn cam locks clockwise until flush.
Cannot attach to wallNo wall studs in locationUse appropriate wall anchors for your wall type.
Boxes don't fitWrong box sizeUse TROFAST boxes designed for this frame.
Wood splinteringForced assemblyDo not force parts; align properly before tightening.

Missing parts? Contact IKEA customer service with article number 505.246.90.

Assembly help: Visit IKEA store assembly service or www.ikea.com for assembly videos.

IKEA TROFAST 505.246.90 Frame instructions manual © - All Rights Reserved 2025