IKEA TROFAST 295.255.97 Wall Storage instructions manual

The IKEA TROFAST 295.255.97 is a versatile wall-mounted storage system designed for organizing children's toys, books, and other items. It features a sturdy frame, multiple storage bins of different sizes, and a safety-tested wall attachment system. Below are key sections for safety, assembly, installation, usage, maintenance, and troubleshooting.

1. Safety Information 2. Package Contents 3. Tools Required 4. Assembly Instructions 5. Wall Mounting 6. Using the Storage System 7. Care & Maintenance 8. Weight Limits 9. Troubleshooting 10. Warranty & Support

Safety Information

Key safety warnings and precautions for assembly and use.

Warning	Description
Wall Attachment	Must be securely fixed to wall studs using provided hardware to prevent tipping
Child Safety	Do not allow children to climb on or hang from the unit
Weight Limit	Do not exceed maximum load capacity (see section 8)
Assembly	Assemble on soft surface to avoid scratching components
Hardware	Keep small parts away from children during assembly

Package Contents

Unpack and verify all components before assembly.

Main frame panels (2 side panels, 1 top panel, 1 bottom panel)
Storage bins (3 pieces - various sizes)
Mounting brackets (2 pieces)
Screws, wall plugs, and other hardware
Assembly instructions (this manual)

IMPORTANT! Check for damaged parts before assembly. Contact IKEA for missing components.

Tools Required

Tools needed for assembly (not included):

Phillips screwdriver
Hammer (for wall plugs)
Drill with appropriate bits
Level
Stud finder
Pencil for marking

NOTE: Using proper tools ensures secure assembly.

Assembly Instructions

Follow these steps to assemble the TROFAST frame:

Lay all panels on a soft, clean surface.
Connect side panels to top panel using provided screws.
Attach bottom panel to side panels.
Ensure all connections are tight and square.
Insert mounting brackets into designated slots on back of frame.
Do not attach bins until after wall mounting is complete.

CAUTION! Do not overtighten screws as this may damage the particle board.

Wall Mounting

Critical steps for secure wall installation:

Locate wall studs using stud finder (must mount into studs).
Mark bracket positions on wall using level to ensure straight installation.
Pre-drill holes for wall plugs if mounting into drywall without studs.
Secure mounting brackets to wall using provided screws.
Hang assembled frame onto mounted brackets.
Test stability by gently pulling forward on frame.

WARNING! Failure to mount securely to wall studs can result in serious injury from tipping.

Using the Storage System

Once securely mounted, insert storage bins:

Bin Placement: Bins slide into frame slots; ensure they are fully seated.
Organization: Use different bin sizes for various items (toys, books, crafts).
Access: Bins can be removed for cleaning or reorganized as needed.
Child Use: Teach children to remove one bin at a time to prevent tipping.

Tip: Label bins for easy identification of contents.

Weight Limits

Maximum load capacities:

Component	Maximum Weight
Large bin	15 lbs (6.8 kg)
Medium bin	10 lbs (4.5 kg)
Small bin	5 lbs (2.3 kg)
Total system load	50 lbs (22.7 kg) distributed evenly

IMPORTANT! Exceeding weight limits may cause damage or detachment from wall.

Care & Maintenance

Cleaning and maintenance instructions:

Wipe frame with damp cloth; dry immediately.
Clean bins with mild soap and water.
Do not use abrasive cleaners or solvents.
Periodically check wall attachment screws for tightness.
Inspect for wear or damage, especially if used by children.

CAUTION! Do not use excessive water on particle board components.

Troubleshooting

Problem	Possible Cause	Solution
Frame not level	Uneven wall or incorrect bracket placement	Remove and reinstall brackets using level
Bins sticking	Misaligned frame or debris in tracks	Check frame alignment; clean tracks
Loose attachment	Screws not tightened properly or not in studs	Re-tighten all screws; ensure attachment to studs
Damage to components	Overloading or impact damage	Replace damaged parts; observe weight limits
Difficulty assembling	Parts not aligned properly	Disassemble and restart from step 1

Warranty & Support

IKEA limited warranty: 1 year from date of purchase against manufacturing defects.

Support: For missing parts, assembly questions, or warranty claims:

Visit: www.ikea.com
Contact local IKEA store
Call IKEA customer service: 1-888-888-4532

Replacement Parts: Available through IKEA customer service.