IKEA TROFAST 094.808.68 Storage Frame instructions manual

The IKEA TROFAST 094.808.68 is a modular storage frame designed for use with TROFAST storage boxes. It features a sturdy wooden frame, multiple shelf levels for flexible box arrangement, a child-friendly design with rounded edges, and a simple assembly process. Below are key sections for safety, parts list, assembly instructions, usage guidelines, care, and warranty information.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Installation & Mounting 6. Using with TROFAST Boxes 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present and undamaged.

Part Description	Quantity	Image Reference
Side Panel (Left)	1	A
Side Panel (Right)	1	B
Back Panel	1	C
Front Rail (Upper)	1	D
Front Rail (Lower)	1	E
Shelf Support Rails (Adjustable)	4	F
Wooden Dowels	12	G
Cam Lock Nuts	8	H
Screws	16	I
Wall Attachment Device	1 set	J

Safety Information

Read all instructions before assembly and use.

Choking Hazard: Small parts included. Keep away from children under 3 years.
Tip-Over Hazard: Furniture can tip over. Always secure to wall using provided anti-tip device.
Assembly: Assemble on a soft, clean surface to avoid scratches. Use correct tools.
Weight Limit: Do not exceed maximum load per shelf as specified.
Inspect: Check all parts for damage before assembly. Do not use damaged parts.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure this furniture to the wall using the provided restraint device.

Assembly Instructions

Follow steps in order. Estimated assembly time: 30-45 minutes.

Prepare: Unpack all parts. Identify using the parts list. Have a screwdriver and hammer ready.
Attach Back Panel: Place side panels (A & B) flat. Insert wooden dowels (G) into pre-drilled holes on side panels. Align back panel (C) and press firmly to connect dowels.
Secure Frame: Turn the frame to stand upright. Insert and tighten cam lock nuts (H) into the side panels from the back to secure the back panel.
Install Front Rails: Attach the upper front rail (D) and lower front rail (E) to the side panels using screws (I). Ensure they are level.
Insert Shelf Supports: Decide on your shelf configuration. Insert the shelf support rails (F) into the desired slots on the side panels. They click into place.
Final Check: Ensure all connections are tight and the frame is square. Do not overtighten screws.

Tip: Assemble with a partner for easier handling of larger panels.

Specifications

Product Name: TROFAST Storage Frame
Article Number: 094.808.68
Color: White
Material: Particleboard, Fiberboard, Plastic, Steel
Dimensions (Assembled): Height: 77 cm, Width: 60 cm, Depth: 44 cm
Max Load per Shelf: 15 kg (when evenly distributed)
Shelf Adjustment: Supports multiple height configurations for TROFAST boxes (sold separately).
Weight (Net): 8.5 kg
Recommended Age: For domestic use. Adult assembly required.

Installation & Mounting

CRITICAL STEP: To prevent tip-over accidents, this furniture MUST be attached to the wall.

Position the assembled frame in its desired permanent location against the wall.
Locate the solid wall studs using a stud finder.
Use the provided wall attachment device (J). Attach the bracket to the frame using the included screws.
Mark the screw holes on the wall through the bracket. Drill pilot holes into the wall stud(s).
Secure the bracket to the wall stud(s) with appropriate screws (not always included; check your hardware).
Ensure the frame cannot be pulled away from the wall.

CAUTION! If you cannot secure the furniture to a wall, do not use it. The wall attachment device is designed for drywall/plaster walls with wood studs.

Using with TROFAST Boxes

This frame is designed for use with IKEA TROFAST storage boxes (sold separately).

Box Compatibility: Compatible with most TROFAST box sizes (e.g., 44x30 cm, 44x60 cm).
Installing Boxes: Simply slide the box into the frame from the front, resting it on the shelf support rails.
Adjusting Shelves: To change box height, remove all boxes, lift and remove the shelf support rails, and reinsert them into a different set of slots on the side panels.
Weight Distribution: Place heavier items in bottom boxes. Do not overload boxes beyond the frame's per-shelf weight limit.
Child Safety: For toy storage, ensure boxes are not overfilled, making them too heavy for a child to pull out.

Care & Maintenance

Clean with a damp cloth wrung out in a mild soap solution. Wipe dry immediately.

DO NOT:

Use abrasive cleaners, scouring pads, or solvents.
Soak or allow water to stand on the surface.
Place near direct heat sources or in damp areas.

Inspection: Periodically check the tightness of all screws and the security of the wall attachment.

Troubleshooting

Problem	Possible Cause	Solution
Frame is wobbly	Connections not tight; floor uneven	Tighten all cam locks and screws. Place on a level surface or use furniture shims.
Shelf supports won't stay in	Not fully inserted into slots	Ensure support rail is pushed in until it clicks. Check for obstructions in the slot.
Boxes are difficult to slide	Frame not square; supports misaligned	Disassemble and reassemble frame, ensuring corners are 90 degrees. Align supports at same height.
Missing part	Packaging error	Contact IKEA customer service with your article number (094.808.68) for replacement parts.
Cannot attach to wall	No wall stud in desired location	Use appropriate wall anchors rated for the weight of the fully loaded furniture. Consult a professional if unsure.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at IKEA stores.

Recycling: At the end of its life, disassemble and recycle materials according to local regulations.

Need Help?

Visit the IKEA website: www.ikea.com
Use the IKEA Store Locator for your nearest store.
For assembly questions, search for "TROFAST 094.808.68" on the IKEA website for digital instructions and videos.