IKEA TROFAST 094.804.15 Storage Frame instructions manual

The IKEA TROFAST 094.804.15 is a versatile and modular storage frame designed for use with TROFAST storage boxes. It features a sturdy pine wood construction, adjustable shelf positions to accommodate different box sizes, a child-friendly design with rounded edges, and a natural finish. The frame can be mounted on the wall for safety and stability. Below are key sections for safety, assembly, installation, usage, care, and troubleshooting.

Parts & Tools Checklist

Before assembly, verify all parts are included. Key components: Storage Frame (pine wood), Shelf supports (metal), Wall attachment device, Screws and plugs, Allen key.

Tools needed: Phillips screwdriver, hammer, pencil, level, measuring tape.

Safety Information

Read all instructions before assembly and use.

1. Choking hazard: Small parts. Keep away from children under 3 years.
2. Tip-over hazard: Always secure to wall using provided wall attachment device to prevent serious injury or death.
3. Weight limit: Do not exceed 50 lbs (22.7 kg) total weight distributed across all shelves.
4. Surface protection: Use felt pads under frame if placing on sensitive floors.

WARNING! Failure to follow assembly and wall mounting instructions can result in serious injury. Use two people for assembly and mounting.

Assembly Instructions

Assemble on a soft, clean surface to avoid scratches.

1. Step 1: Lay frame pieces flat. Identify left and right side panels (with pre-drilled holes).
2. Step 2: Attach shelf support rails to side panels using provided screws and Allen key. Ensure rails are level and facing inward.
3. Step 3: Connect back panel to side panels. Align holes and tighten screws securely.
4. Step 4: Attach top and bottom cross beams. Check all joints are firm and square.
5. Step 5: Place assembled frame upright on floor. Do not load shelves until wall mounted.

Tip: Do not overtighten screws in wood to avoid splitting.

Wall Mounting

CRITICAL: Must be mounted to wall studs or solid masonry.

1. Locate wall studs using stud finder. Mark positions with pencil.
2. Hold wall bracket against wall at desired height (recommended: bottom of frame 2 inches above floor). Use level to ensure bracket is horizontal.
3. Mark screw holes. Drill pilot holes into studs. Insert wall plugs if into masonry.
4. Secure bracket to wall with screws provided. Ensure tight fit.
5. Lift frame and hook onto wall bracket. Ensure locking mechanism engages.
6. Test stability by gently pulling top of frame forward. It should not move away from wall.

CAUTION! If unsure about wall structure, consult a professional. Never mount to drywall alone.

Specifications

• Model: TROFAST 094.804.15
• Material: Solid pine, steel shelf supports
• Finish: Natural, clear lacquer
• Dimensions (HxWxD): 30.75" x 28.75" x 12.625" (78 cm x 73 cm x 32 cm)
• Weight Capacity: 50 lbs (22.7 kg) total distributed load
• Shelf Adjustments: 3 height positions per side
• Compatible Boxes: TROFAST boxes in various sizes (sold separately)
• Warranty: 10-year limited warranty (see warranty card)

Using with TROFAST Boxes

Designed for use with TROFAST storage boxes (sold separately).

1. Choose boxes that fit shelf spacing (small, medium, or large TROFAST boxes).
2. Place boxes on shelves. Ensure weight is evenly distributed.
3. Boxes can be pulled out like drawers. Teach children to pull gently from center.
4. Do not overload boxes beyond their stated capacity.

Tip: Label boxes for easy organization of toys, crafts, or accessories.

Adjusting Shelves

Shelf height can be adjusted to fit different box sizes.

1. Remove all boxes and items from shelf.
2. Lift shelf slightly and pull forward to disengage from support pins.
3. Align shelf with desired set of support holes on left and right rails.
4. Push shelf back until it clicks securely into place on all four support pins.
5. Test stability by applying gentle downward pressure.

Note: Ensure both sides of shelf are at same height position.

Care & Maintenance

Use a dry or slightly damp cloth to clean. Wipe spills immediately.

• Wood: Dust with soft, dry cloth. For stains, use mild soapy water; dry immediately.
• Metal parts: Wipe with dry cloth to prevent rust.
• Avoid: Abrasive cleaners, solvents, excessive moisture, direct sunlight, and heat sources.

CAUTION! Do not use wax, polish, or silicone-based products on the wood finish.

Disassembly & Moving

To move or store the frame:

1. Remove all boxes and items.
2. Detach from wall bracket by lifting frame upward and pulling away from wall.
3. Using Allen key and screwdriver, reverse assembly steps to disassemble.
4. Keep all hardware in a labeled bag.
5. Protect wood surfaces during transport.

Warning: Re-mount to wall immediately upon reassembly in new location.

Warranty Information

IKEA of Sweden AB provides a 10-year limited warranty for this product against manufacturing defects in materials and workmanship under normal household use. Warranty does not cover damage from improper assembly, failure to mount to wall, accidents, misuse, or commercial use. For warranty service, contact IKEA customer service with proof of purchase. Visit www.IKEA.com for your local store contact information.

Troubleshooting

Customer Support: Visit www.IKEA.com or contact your local IKEA store.