IKEA TROFAST 093.304.64 Storage Frame instructions manual

The IKEA TROFAST 093.304.64 is a versatile storage frame designed for use with TROFAST storage boxes. It features a sturdy wooden frame construction, multiple box configurations, wall attachment for safety, and an easy-to-assemble design. Below are key sections for safety, parts list, assembly instructions, usage guidelines, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Mounting to Wall 5. Using with Storage Boxes 6. Weight Limits & Specifications 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts & Hardware

All components included in package. Check against list before assembly.

Part Name	Quantity	Description
Frame Side Panel	2	Main vertical wooden panels
Frame Top/Bottom Rail	2	Horizontal wooden rails
Support Rails	3	Adjustable rails for box placement
Wooden Dowels	8	For connecting frame parts
Cam Locks	4	For securing connections
Wall Attachment Brackets	2	For securing frame to wall
Screws for Brackets	4	For wall mounting
Allen Key	1	For tightening cam locks
Instruction Manual	1	This document

Safety Instructions

Read all instructions before assembly. Use proper tools.

Choking hazard: Small parts included. Keep away from children under 3 years.
Tip-over prevention: MUST be attached to wall using provided brackets.
Weight limit: Do not exceed maximum load per rail (see Specifications).
Assembly surface: Use clean, flat, protected surface to avoid scratches.
Tool safety: Use included Allen key carefully to avoid stripping screws.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure to wall.

Assembly Steps

Estimated assembly time: 20-30 minutes. Two people recommended.

Prepare parts: Lay out all parts. Identify using parts list.
Connect side panels to rails: Insert dowels into side panels. Align with holes in top and bottom rails. Tap gently to secure.
Secure with cam locks: Insert cam locks into designated holes on side panels. Turn clockwise with Allen key until tight.
Install support rails: Slide support rails into slots on side panels. Adjust to desired height (3 positions).
Check stability: Ensure all connections are tight and frame is square.

Tip: Do not fully tighten cam locks until all parts are aligned.

Mounting to Wall

This step is mandatory for safety. Use wall plugs suitable for your wall type (not included for concrete/brick).

Position frame against wall in desired location.
Attach brackets to top rear of frame using provided screws.
Mark bracket screw holes on wall with pencil.
Move frame aside. Drill holes at marks. Insert appropriate wall plugs.
Reposition frame. Secure brackets to wall with screws. Tighten firmly.
Gently pull forward on frame to ensure it is securely attached.

CAUTION! Ensure brackets are attached to wall studs or use heavy-duty wall anchors for solid mounting.

Using with Storage Boxes

Designed for use with IKEA TROFAST storage boxes (sold separately).

Box placement: Slide boxes onto support rails from the front.
Configuration: Support rails can be adjusted to accommodate different box heights (e.g., mix small and large boxes).
Removing boxes: Pull box forward to lift off rail. Do not tilt heavily loaded boxes.
Labeling: Use labels on box fronts for easy content identification.

Note: Ensure boxes are fully seated on rails and not overhanging.

Weight Limits & Specifications

Frame Material: Particleboard, Fiberboard, ABS plastic, Steel.
Color: White.
Dimensions (W x H x D): 77 x 91 x 40 cm (30 1/4 x 35 3/4 x 15 3/4 inches).
Max Load per Support Rail: 15 kg (33 lb).
Total Max Load (Frame): 45 kg (99 lb).
Compatible Box Sizes: TROFAST boxes in various sizes (e.g., 24x30 cm, 34x30 cm, 44x30 cm).
Weight of Frame: 8.5 kg (18 lb 12 oz).

Do not exceed weight limits. Distribute weight evenly.

Care & Maintenance

Clean with damp cloth. Wipe dry immediately.

Wood parts: Use mild soapy water. Do not soak. Avoid abrasive cleaners.
Plastic components: Wipe with soft, damp cloth.
Rails: Check periodically for secure attachment. Tighten if loose.
Wall brackets: Check tightness every 6 months.

CAUTION! Do not use harsh chemicals, ammonia, or abrasive pads. Avoid excessive moisture.

Troubleshooting

Issue	Possible Cause	Solution
Frame wobbles	Cam locks not tight; floor uneven	Tighten all cam locks; place on level surface.
Support rail slips	Not locked into slot	Ensure rail end is fully inserted into side panel slot.
Box does not slide easily	Rail misaligned; box overloaded	Check rail alignment; reduce weight in box.
Difficulty attaching to wall	Wrong wall plugs; not in stud	Use appropriate anchors for your wall type; locate studs.
Dowels not fitting	Holes misaligned	Ensure parts are oriented correctly; do not force.

Re-tighten: Check all connections after 2 weeks as materials may settle.

Warranty & Support

IKEA limited warranty applies. See IKEA warranty terms for details.

Warranty period: As per local IKEA policy (typically 1-10 years depending on region).
Coverage: Manufacturing defects in materials and workmanship.
Not covered: Damage from improper assembly, misuse, or failure to attach to wall.
Spare parts: Available through IKEA customer service.
Support: Visit www.ikea.com for assembly videos, spare parts, or contact your local IKEA store.

Recycling: Dispose of packaging and product responsibly according to local regulations.