IKEA TRINDSNÖ 005.533.07 Floor Lamp instructions manual

The IKEA TRINDSNÖ 005.533.07 is a modern floor lamp featuring a tripod base, adjustable height, fabric shade, and energy-efficient LED bulb compatibility. Designed for living rooms, bedrooms, or reading corners, it provides focused ambient lighting with a sleek Scandinavian aesthetic. Below are key sections for safety, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Tripod metal base, adjustable central pole, fabric shade, integrated switch, cord with plug.

Assembly Instructions

Unpack all parts and hardware. Lay components on a soft surface to avoid scratches.

1. Attach tripod legs: Insert legs into base plate, secure with provided screws.
2. Assemble central pole: Connect pole sections by twisting clockwise until tight.
3. Mount shade: Place fabric shade over bulb socket frame, secure with locking ring.
4. Attach pole to base: Insert pole into base hub, tighten set screw with Allen key.
5. Route cord: Thread cord through pole channel, ensure it is not pinched.
6. Install bulb: Screw in compatible LED bulb (not included).

WARNING! Do not overtighten screws. Assemble on a clean, flat surface.

Installation & Placement

Choose location carefully before final placement.

1. Ensure floor is level and dry.
2. Position lamp where cord can reach outlet without tension.
3. Keep away from high-traffic areas to prevent tipping.
4. Maintain at least 30cm (12 inches) clearance from walls/curtains.
5. Plug into a standard 120V AC outlet.

CAUTION! Do not place near heat sources or in damp locations.

Specifications

• Model: TRINDSNÖ 005.533.07
• Height Range: 120–150 cm (47–59 inches) adjustable
• Shade Diameter: 30 cm (12 inches)
• Base Diameter: 50 cm (20 inches)
• Bulb Type: 1 x max 13W LED, E26/E27 base (not included)
• Voltage: 120V AC, 60Hz
• Cord: 1.8m, with inline switch
• Materials: Steel, polyester
• Weight: 3.2 kg (7 lbs)
• Color Options: Black, White

Controls and Operation

Operation is simple with integrated on/off switch.

Switch: Located on cord near base; press to turn on/off.

Height Adjustment: Loosen locking knob on pole, slide to desired height, retighten knob.

Shade Orientation: Shade can be tilted slightly by gently bending the neck (if flexible model).

Note: Use only with recommended bulb type to avoid overheating.

Bulb Replacement

Always turn off and unplug lamp before replacing bulb.

1. Allow bulb to cool if recently used.
2. Remove shade if necessary (unscrew locking ring).
3. Unscrew old bulb counterclockwise.
4. Screw in new LED bulb (max 13W) clockwise until snug.
5. Replace shade and secure ring.
6. Plug in and test.

Tip: Use LED bulbs for energy efficiency and reduced heat.

Adjustability Features

Height adjustment: Loosen knob, extend pole, retighten. Shade tilt: Gently adjust shade angle for directed light (if model allows).

Safety Precautions

Read all safety instructions before use.

• Use only with specified bulb wattage.
• Do not cover lamp or shade during operation.
• Keep away from children and pets.
• Do not use outdoors or in bathrooms.
• Inspect cord regularly for damage.

WARNING! Risk of electric shock if used improperly. Unplug before maintenance.

Care & Cleaning

Unplug lamp and allow to cool before cleaning.

1. Dust shade with soft brush or dry cloth.
2. Wipe metal parts with damp cloth; dry immediately.
3. Do not use abrasive cleaners or solvents.
4. Never immerse any part in water.

CAUTION! Fabric shade is not washable; spot clean only.

Warranty Information

IKEA limited warranty applies; see IKEA terms for details. For support, visit www.ikea.com or contact IKEA customer service. This product complies with applicable safety standards.

Troubleshooting

Service: For defects, return to IKEA with receipt. Do not attempt to repair electrical parts.

Contact: IKEA customer support: 1-888-888-4532