IKEA TRENSUM 245.244.85 Mirror instructions manual

The IKEA TRENSUM 245.244.85 is a wall-mounted mirror designed for bathroom or hallway use, featuring a rectangular shape with a silver-colored frame, safety backing, and included mounting hardware. Below are key sections for safety, assembly, installation, care, and warranty information.

1. Product Overview 2. Safety Instructions 3. Included Parts 4. Assembly Instructions 5. Wall Installation 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty Information

Product Overview

Key features: Rectangular wall mirror with silver metal frame, safety backing to prevent shattering, pre-drilled mounting holes, and included hardware for secure installation.

FeatureDescription
Frame MaterialSilver-colored metal
Mirror TypeClear float glass with safety backing
Mounting TypeWall-mounted (horizontal or vertical orientation)
Pre-drilled HolesYes, for easy installation
Intended UseIndoor use only (bathroom, hallway, bedroom)

Safety Instructions

Read all instructions before assembly and installation.

  1. Use only the included hardware for installation.
  2. Ensure wall can support mirror weight (check wall type: drywall, stud, concrete).
  3. Keep away from direct heat sources and excessive moisture.
  4. Do not hang above bathtub unless specifically rated for wet areas.
  5. Keep out of reach of children during installation.

WARNING! Mirror is heavy; use two people for handling and installation to avoid injury or damage.

Included Parts

Check that all parts are present before starting assembly.

Note: Tools required but not included: Phillips screwdriver, drill, level, measuring tape, pencil.

Assembly Instructions

Assemble the mirror before wall mounting.

  1. Unpack mirror and lay on a soft, flat surface (use cardboard or blanket to protect surface).
  2. Attach mounting brackets to rear of mirror frame using pre-drilled holes.
  3. Align brackets with marked positions on frame; ensure they are level.
  4. Secure brackets with provided screws (hand-tighten; do not overtighten).
  5. Check that brackets are firmly attached and mirror is stable.

CAUTION! Handle mirror with care; avoid placing pressure on glass surface.

Wall Installation

Follow these steps for secure wall mounting.

  1. Choose location: Ensure wall is flat, sturdy, and away from high humidity areas unless rated for bathrooms.
  2. Mark bracket positions: Hold mirror against wall (with help), use level to ensure straight, mark screw holes with pencil.
  3. Drill holes: Use appropriate drill bit for wall type (check for studs if needed). Insert wall plugs.
  4. Mount brackets: Screw brackets into wall using provided screws; leave slight gap for mirror hooks.
  5. Hang mirror: Lift mirror onto brackets; ensure it clicks into place securely.
  6. Final check: Gently test stability; adjust if necessary.

Tip: For heavier walls (concrete/brick), use appropriate anchors (not included).

Care & Maintenance

Clean mirror regularly to maintain clarity.

  1. Use soft, lint-free cloth (microfiber recommended).
  2. Dampen cloth with water or mild glass cleaner; avoid abrasive chemicals.
  3. Wipe gently in circular motions; dry with clean cloth.
  4. For frame, use dry cloth to dust; avoid water on metal to prevent rust.

CAUTION! Do not use ammonia-based cleaners, scouring pads, or sharp objects on mirror surface.

Specifications

Troubleshooting

IssuePossible CauseSolution
Mirror not levelUneven wall or incorrect bracket placementRecheck with level; remount brackets evenly.
Brackets looseScrews not tightened or wall plugs unsuitableTighten screws; use appropriate wall anchors for wall type.
Frame scratchesRough handling during assemblyHandle with care; avoid dragging on hard surfaces.
Glass appears blurryResidue from packaging or improper cleaningClean with mild glass cleaner and soft cloth.
Mirror feels unstableInsufficient wall support or incorrect mountingEnsure wall can support weight; remount securely, possibly into studs.

Note: If mirror is damaged or parts missing, contact IKEA customer service.

Warranty Information

IKEA TRENSUM mirror comes with a limited 1-year warranty covering manufacturing defects. Warranty does not cover damage from improper installation, accidents, misuse, or normal wear and tear. For warranty claims, contact IKEA customer service with proof of purchase.

Contact: IKEA Customer Support: 1-800-434-4532 or visit www.IKEA-usa.com

IKEA TRENSUM 245.244.85 Mirror instructions manual © - All Rights Reserved 2025