IKEA TORNVIKEN 803.590.33 Box instructions manual

The IKEA TORNVIKEN 803.590.33 is a versatile storage box designed for organization in various rooms. Made from durable materials, it features a clean design, smooth operation, and easy assembly. Below are key sections for safety, features, assembly, use, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Assembly Instructions 4. Specifications 5. Placement & Use 6. Care & Cleaning 7. Safety Information 8. Warranty & Support 9. Troubleshooting

Features at a Glance

Key components: Main box body, lid, optional dividers (if included), and assembly hardware.

Feature	Description
Material	Durable particleboard with melamine foil or solid wood finish
Dimensions (approx.)	Length: XX cm, Width: XX cm, Height: XX cm
Weight Capacity	Up to XX kg when evenly distributed
Lid Type	Hinged or removable (model dependent)
Finish	Scratch-resistant surface, easy to clean
Design	Minimalist, fits various decor styles
Assembly	Tool-free or minimal tools required
Ventilation	Optional air holes for storage of specific items
Stackable	Designed for safe stacking (check model)
Use	For home, office, garage, or children's room organization

Package Contents

Unpack and verify all parts before assembly. Contact IKEA if any items are missing.

Box body panels (sides, bottom).
Lid piece.
Assembly screws/connectors (Cam locks, dowels, screws).
Optional: Dividers, hinges, or handles.
Assembly tool (if included, e.g., Allen key).
Instruction manual (this document).

WARNING! Keep packaging away from children to avoid suffocation risk. Check for damaged parts.

Assembly Instructions

Follow steps in order. Work on a clean, flat, protected surface.

Prepare: Lay out all parts and hardware. Identify pieces using the manual diagrams.
Connect Side Panels: Attach side panels to the bottom panel using provided dowels and Cam locks. Tighten Cam locks a quarter-turn with the tool.
Attach Back/Front Panels: If applicable, fix back and front panels to the assembly.
Install Lid: Attach hinges to the lid (if pre-drilled) and then to the back of the box. Ensure smooth opening/closing.
Add Optional Dividers: Insert dividers into slots inside the box for compartmentalization.
Final Check: Ensure all connections are tight and the box is stable. Remove any protective film from surfaces.

CAUTION! Do not overtighten screws or Cam locks. Assemble with care to avoid pinching fingers.

Specifications

Article Number: 803.590.33
Product Name: TORNVIKEN
Type: Storage Box with Lid
Main Material: Particleboard, Fiberboard, Plastic (hardware)
Surface: Melamine foil, Acrylic paint, or Foil
Color: White, Black-Brown, or as specified
Weight: Approx. XX kg (assembled)
Load Capacity: Max XX kg (evenly distributed on bottom)
Country of Origin: To be specified on packaging
Compliance: Meets applicable safety and quality standards

Placement & Use

Place on a flat, stable, and level surface. Do not place on uneven or soft surfaces that may cause tipping.

Recommended Use: Store books, toys, office supplies, tools, linens, or other household items.

Loading: Distribute weight evenly. Avoid overloading beyond specified capacity. Heavier items should be placed at the bottom.

Lid Operation: Open and close gently. Do not let the lid slam shut. Keep fingers clear of hinge areas.

Stacking: If designed to be stacked, ensure boxes are aligned and stable. Do not stack more than the recommended number.

Care & Cleaning

Unload the box before moving or cleaning.

Surface Cleaning: Wipe with a soft, slightly damp cloth. Use mild soap if needed. Dry immediately.
Avoid: Abrasive cleaners, scouring pads, solvents, or excessive water.
Protection: Avoid prolonged direct sunlight, heat sources, or high humidity to prevent warping or fading.

CAUTION! Never immerse the box in water. Liquid can damage the material and weaken joints.

Safety Information

This product is intended for domestic use only.

Children: Do not let children play with the box or climb on it. The lid could close unexpectedly.
Weight: Do not exceed the maximum load capacity. Overloading can cause breakage and injury.
Moving: Empty the box before moving it. Lift with your legs, not your back.
Hardware: Ensure all screws and connectors are tight periodically. Loose parts can be a hazard.
Fire Safety: Keep away from open flames and high-temperature sources.

Warranty & Support

IKEA limited warranty applies. Refer to the IKEA warranty leaflet included with your purchase or available at IKEA stores.

Contact IKEA: For missing parts, assembly questions, or warranty claims, visit the IKEA website or your local store with your receipt and article number (803.590.33).

Online Resources: Assembly videos and guides may be available at www.ikea.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Box feels wobbly	Connectors not fully tightened; uneven surface	Check and tighten all Cam locks and screws. Place on a flat surface.
Lid does not close properly	Hinges misaligned; box distorted	Loosen hinge screws slightly, align lid, and retighten. Ensure box is square during assembly.
Drawer/divider sticks	Misaligned tracks; debris in tracks	Check alignment. Clean tracks with a dry cloth. Do not force.
Surface stain	Spills not cleaned promptly	Wipe immediately with a damp cloth. For stubborn stains, use mild soap. Test in an inconspicuous area first.
Part missing or damaged	Packaging error; damage during shipping	Contact IKEA customer service with your receipt and article number for replacement parts.

Note: Do not modify the product or use non-IKEA parts, as this may affect safety and void the warranty.

Service: www.ikea.com or visit your local IKEA store.