IKEA TORNVIKEN 103.590.36 Cabinet instructions manual

The IKEA TORNVIKEN 103.590.36 is a wall-mounted cabinet designed for kitchen or bathroom storage, featuring a glass door, adjustable shelves, and a modern design. It requires assembly and proper mounting to wall studs. Below are key sections for safety, parts list, assembly instructions, mounting, care, and troubleshooting.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Wall Mounting 6. Adjusting Shelves 7. Care & Maintenance 8. Specifications 9. Warranty Information 10. Troubleshooting

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part Description	Quantity	Image Ref.
Cabinet frame (main body)	1	A
Glass door with hinges pre-attached	1	B
Adjustable shelves	2	C
Back panel	1	D
Mounting rail	1	E
Wall anchors & screws	Set	F
Cam locks, screws, dowels	Set	G
Door handle	1	H
Instruction manual	1	-

Tools Required

Tools not included; gather before starting.

Phillips screwdriver
Hammer
Drill with bits (for wall mounting)
Level
Pencil
Measuring tape

NOTE: Using correct tools ensures safe and proper assembly.

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

Weight capacity: Do not exceed 25 lbs per shelf. Distribute weight evenly.
Wall mounting: MUST be mounted to wall studs using provided hardware. Do not mount to drywall alone.
Two-person lift: Cabinet is heavy; use two people to lift and mount.
Glass door: Handle with care; avoid impacts.

WARNING! Failure to mount securely can cause cabinet to fall, resulting in injury or damage.

Assembly Steps

Assemble on a soft, flat surface to avoid scratches.

Attach back panel: Place frame face down. Align back panel (D) and secure with provided screws.
Install cam locks: Insert dowels into side panels, join with cam locks (turn clockwise to lock).
Attach mounting rail: Fix rail (E) to top inside back of cabinet using screws.
Install shelves: Insert shelves (C) into desired height slots; ensure they sit level.
Attach door: Hang door (B) on hinges; adjust with screwdriver for alignment.
Install handle: Screw handle (H) to door as shown in diagram.

Tip: Do not fully tighten screws until all parts are aligned.

Wall Mounting

Most critical step; ensure secure attachment to wall studs.

Locate studs using stud finder; mark positions with pencil.
Hold cabinet against wall at desired height (recommended 54" from floor to top). Use level to ensure it is straight.
Mark drill holes through mounting rail onto wall.
Drill pilot holes into studs at marked points.
Lift cabinet with helper, align with holes, and secure with provided screws through rail into studs.
Tighten screws fully; test stability by gently pulling forward.

CAUTION! If studs are not at rail positions, use heavy-duty toggle bolts rated for cabinet weight.

Adjusting Shelves

Shelves can be moved to customize storage.

Remove shelf by lifting slightly and pulling forward.
Reposition shelf pins to desired height slots inside cabinet.
Place shelf back onto pins, ensuring it clicks into place.

Note: Ensure shelf is level and secure before loading.

Care & Maintenance

Clean regularly to maintain appearance.

Frame: Wipe with damp cloth; dry immediately. Do not use abrasive cleaners.
Glass door: Use glass cleaner and soft cloth. Avoid spraying directly onto hinges.
Shelves: Remove and wipe clean as needed.

CAUTION! Do not use harsh chemicals; they may damage surfaces.

Specifications

Model: TORNVIKEN 103.590.36
Dimensions: 30" W x 14" D x 30" H (76cm x 36cm x 76cm)
Material: Particleboard, foil, tempered glass
Color: White
Weight capacity: 25 lbs (11 kg) per shelf, 50 lbs (23 kg) total
Mounting hardware included: Yes
Warranty: 10-year limited warranty

Warranty Information

IKEA offers a 10-year limited warranty on this cabinet, covering material and manufacturing defects under normal household use. Warranty does not cover damage from improper assembly, mounting, accidents, or misuse. Keep receipt as proof of purchase.

For warranty claims, contact IKEA customer service with model number and purchase details.

Troubleshooting

Issue	Possible Cause	Solution
Cabinet wobbles	Not mounted to studs; screws loose	Remount into studs; tighten all screws.
Door misaligned	Hinge screws loose	Adjust hinge screws with screwdriver.
Shelf not level	Pins not at same height	Check pin positions; adjust to matching slots.
Difficulty assembling	Parts forced incorrectly	Disassemble and follow steps carefully; ensure cam locks are turned fully.
Hardware missing	Packaging error	Contact IKEA for replacement parts.

Support: For assistance, visit IKEA website or call 1-888-888-4532.