IKEA TONVIS 204.599.69 Table Lamp instructions manual

The IKEA TONVIS 204.599.69 is a modern table lamp designed for ambient lighting. It features a clean, minimalist design with a fabric shade and metal base, suitable for desks, bedside tables, or living rooms. This manual covers assembly, installation, operation, safety, maintenance, and troubleshooting. Please read all instructions before use.

Package Contents & Safety

Before assembly, verify all parts are included and undamaged.

WARNING! Keep packaging away from children. Check for damaged parts; do not use if damaged.

Assembly Instructions

Assemble on a clean, flat surface. Follow steps in order.

1. Prepare base: Place lamp base upright on stable surface.
2. Attach shade: Align shade with base top; press or screw gently until secure.
3. Secure connections: Ensure all parts are firmly connected without forcing.
4. Check stability: Lamp should not wobble.

CAUTION! Do not overtighten. Use hands only; no tools required unless specified.

Installation & Setup

Install in desired location before inserting bulb.

1. Choose location: Stable, flat surface away from edges.
2. Position cord: Route cord safely to avoid tripping.
3. Insert bulb: Use max 60W E26 bulb (not included). Screw in clockwise until snug.
4. Plug in: Connect to standard 120V AC outlet.

Tip: Ensure lamp is unplugged during bulb installation.

Specifications

• Model: TONVIS 204.599.69
• Dimensions: Height: 12.6" (32 cm), Base diameter: 5.9" (15 cm)
• Material: Base: Steel, Shade: Polyester fabric
• Color: Black/White (as per variant)
• Bulb Type: 1 x E26 base, max 60W incandescent or equivalent LED
• Voltage: 120V AC, 60Hz
• Cord Length: 6 ft (1.8 m)
• Weight: 2.2 lbs (1 kg)

Controls & Operation

Operation is via in-line switch on cord.

Switch: On/Off toggle located on power cord.

Light adjustment: Use dimmable bulbs with external dimmer switch (not included) for adjustable brightness. Lamp itself has no built-in dimmer.

Positioning: Shade is fixed; adjust lamp placement for desired light direction.

Bulb Replacement

Replace bulb when it burns out or for different brightness/color.

1. Unplug lamp and let bulb cool completely.
2. Grip bulb firmly; turn counterclockwise to remove.
3. Insert new E26 bulb (max 60W); turn clockwise until snug.
4. Plug in and test.

WARNING! Use only recommended bulb type. Do not exceed wattage to prevent overheating.

Care & Cleaning

Regular cleaning maintains appearance and safety.

1. Unplug lamp before cleaning.
2. Base: Wipe with dry, soft cloth. For stains, use damp cloth with mild soap; dry immediately.
3. Shade: Use soft brush or vacuum with brush attachment to remove dust. Do not wet fabric.
4. Cord: Wipe with dry cloth.

CAUTION! Do not immerse in water. Avoid abrasive cleaners.

Safety Information

Follow safety guidelines to prevent injury or damage.

• Use only with 120V AC outlet.
• Do not use outdoors or in damp areas.
• Keep away from children and pets.
• Do not cover lamp or place near flammable materials.
• Disconnect power before maintenance.
• If cord is damaged, discontinue use and contact support.

Note: Lamp may become warm during use; allow cooling before handling.

Warranty & Support

IKEA limited warranty applies. Retain receipt for proof of purchase.

Warranty: Covers defects in materials/workmanship. See IKEA warranty terms for details.

Support: For questions or missing parts, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com.

Troubleshooting

Disposal: Dispose of according to local regulations. Recycle where possible.

Service: 1-888-888-4532; www.ikea.com