IKEA TOMMARYD 993.048.04 Underframe instructions manual

The IKEA TOMMARYD 993.048.04 is an underframe designed to support various table tops, providing a sturdy and adjustable base. It features a metal construction with adjustable feet for leveling on uneven floors, pre-drilled mounting holes for easy assembly, and a clean, minimalist design suitable for home or office use. Below are key sections for safety, features, assembly, installation, adjustment, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Information 4. Tools Required 5. Assembly Instructions 6. Installation to Table Top 7. Leveling & Adjustment 8. Weight Capacity 9. Care & Maintenance 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Metal underframe, adjustable leveling feet, pre-drilled mounting plates, assembly hardware.

Feature	Description
Material	Powder-coated steel for durability
Adjustable Feet	Four screw-adjustable feet for stability on uneven floors
Mounting Plates	Pre-drilled for secure attachment to table top
Design	Minimalist, clean lines
Compatibility	Designed for use with various IKEA and compatible table tops
Color	Black (as standard)
Assembly	Tool-assisted assembly required
Load Capacity	Supports table tops up to specified weight (see section 8)

Package Contents

Unpack and verify all parts are present before starting assembly.

Underframe main structure (1 piece)
Adjustable feet (4 pieces)
Mounting brackets/plates (set)
Assembly screws and bolts (as per pack)
Hex key (Allen wrench) included
Instruction manual (this document)

IMPORTANT! Check for any damage during shipping. Contact IKEA customer service if parts are missing or damaged.

Safety Information

Read all instructions before assembly and use.

Use on a flat, stable surface during assembly.
Ensure all screws are tightened securely.
Do not exceed the maximum weight capacity.
Keep small parts away from children during assembly.
Use appropriate safety equipment if drilling additional holes.

WARNING! The underframe and table top can be heavy; use two people for handling to avoid injury.

Tools Required

Included: Hex key (Allen wrench).
Recommended: Phillips screwdriver, rubber mallet (for adjustments), level tool.
Optional: Power drill with appropriate bits (if pre-drilling required for custom tops).

Note: All necessary hardware is included. Do not use incompatible screws.

Assembly Instructions

Follow steps in order. Do not fully tighten screws until all parts are aligned.

Lay all parts on a clean, flat surface.
Attach the adjustable feet to the bottom of each leg using the provided screws and hex key.
Connect the cross braces to the main frame according to the diagram (if applicable).
Secure mounting plates to the top of the frame using the provided bolts.
Ensure all connections are square and aligned before final tightening.
Once assembled, place the frame upright and check for stability.

Tip: Assemble near the final location to avoid moving the heavy frame.

Installation to Table Top

Attaching the underframe to your table top.

Place the assembled underframe upside down on a protected surface.
Position your table top upside down onto the mounting plates.
Align the underframe centrally according to your table top dimensions.
Secure the table top to the mounting plates using the provided screws (ensure screws are appropriate for your table top material).
Tighten all screws evenly and securely.
Carefully flip the entire table upright with assistance.

CAUTION! Ensure the table top is properly supported during flipping to prevent damage or injury.

Leveling & Adjustment

Adjusting for uneven floors.

Place the table in its final position.
Use a level tool on the table top surface.
Turn the adjustable feet clockwise to raise or counterclockwise to lower each corner.
Check the level from multiple angles.
Once level, ensure all feet are in firm contact with the floor.

Note: For carpeted floors, you may need to adjust the feet to press firmly through the carpet.

Weight Capacity

Maximum Load: 50 kg (110 lbs) evenly distributed.
Point Load: Avoid placing excessive weight on a single small area of the table top.
Dynamic Load: Not designed for sitting, standing, or climbing.

WARNING! Exceeding the weight limit may cause structural failure and injury.

Care & Maintenance

Clean with a soft, dry cloth. For stubborn marks, use a damp cloth with mild soap. Dry immediately.

DO NOT use abrasive cleaners, scouring pads, or harsh chemicals on the powder-coated surface.

Periodically check and tighten screws and bolts to maintain stability.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with your purchase or available at www.ikea.com.

For service or spare parts, contact IKEA customer service with your product number (993.048.04).

Troubleshooting

Symptom	Possible Cause	Corrective Action
Table wobbles	Uneven floor; feet not adjusted	Use level tool and adjust feet until stable.
Frame feels loose	Screws not fully tightened	Check and tighten all assembly screws and bolts.
Screws won't tighten	Stripped threads; wrong screw	Ensure you are using the correct screws from the package. Do not force.
Difficulty attaching top	Misaligned mounting plates	Loosen plate screws, reposition frame, retighten.
Scratches on floor	Feet not adjusted or protected	Ensure feet are fully screwed in. Use protective pads if needed.

Need Help? Visit www.ikea.com or contact your local IKEA store for assembly support or spare parts.