IKEA TOMMARYD 104.298.88 Underframe instructions manual

The IKEA TOMMARYD 104.298.88 Underframe is a sturdy metal bed frame base designed to support IKEA mattresses and bed slats. It features a simple, modern design with adjustable legs for height customization, compatibility with various IKEA bed systems, and easy assembly using included tools and hardware. Below are key sections for safety, parts list, assembly steps, installation, care, and troubleshooting.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Installation & Leveling 5. Specifications 6. Care & Maintenance 7. Compatibility 8. Warranty Information 9. Troubleshooting

Parts & Hardware Included

Key components: Metal underframe side rails, cross supports, adjustable legs, assembly hardware, and instruction manual.

Part Name	Quantity	Description
Side Rail (Long)	2	Main longitudinal frame pieces
Cross Support Bar	2-3	Horizontal braces for stability
Adjustable Leg	4-6	Threaded legs with height adjustment
Hex Key (Allen Wrench)	1	Included tool for assembly
Bolts & Screws	Set	Pre-counted hardware packets
Plastic Glides	4-6	Foot protectors for floor

Safety Information

Read all instructions before assembly. Ensure proper handling and installation.

Assembly: Requires two adults. Lift with care to avoid strain or injury.
Placement: Use on flat, level surface. Do not place on uneven or wet floors.
Weight limit: Check specifications for maximum load capacity.
Hardware: Tighten all bolts and screws securely. Periodically check for looseness.

WARNING! Do not exceed weight limit. Keep small children away during assembly. Use protective gloves if needed.

Assembly Instructions

Follow step-by-step guide for correct assembly.

Unpack: Lay all parts on a clean, soft surface to avoid scratches.
Identify: Match parts with diagrams in manual.
Attach legs: Screw adjustable legs into pre-drilled holes on side rails.
Connect cross supports: Bolt cross bars between side rails for rigidity.
Tighten: Use hex key to secure all connections firmly.
Attach glides: Snap plastic glides onto bottom of each leg.

Tip: Do not fully tighten bolts until all parts are aligned.

Installation & Leveling

Positioning: Place underframe in desired location.
Leveling: Adjust leg height by twisting clockwise/ counterclockwise.
Check stability: Ensure frame does not wobble; re-adjust legs if needed.
Add slats/mattress: Place compatible bed slats on frame, then add mattress.

CAUTION! Ensure frame is level before adding weight. Use a spirit level if necessary.

Specifications

Model: TOMMARYD 104.298.88
Material: Steel, powder-coated finish
Color: Black or white (as per variant)
Adjustable Height Range: Approx. 4-6 inches (10-15 cm)
Max Load Capacity: Refer to label on packaging (typically 220-300 lbs per side)
Compatible Mattress Sizes: Twin, Full, Queen, King (check variant)
Weight: Varies by size (approx. 15-25 lbs)
Tools Required: Hex key included; no additional tools needed

Care & Maintenance

Clean with dry or slightly damp cloth. Avoid abrasive cleaners.

Regularly check bolts and screws for tightness.
Inspect legs and glides for wear; replace if damaged.
Keep frame dry; wipe spills immediately to prevent rust.
Do not drag frame across floor; lift to move.

CAUTION! Do not use harsh chemicals; they may damage finish.

Compatibility

Designed for use with IKEA bed slats (e.g., LURÖY, LÖNSET) and IKEA mattresses.

Component	Compatible IKEA Products
Bed Slats	Most IKEA slat systems with correct size
Mattresses	IKEA foam, spring, or latex mattresses
Bed Frames	Can be used as replacement underframe for compatible IKEA beds

Note: Ensure slat width matches underframe inner dimensions.

Warranty Information

Limited warranty provided by IKEA. Refer to warranty card in packaging.

Duration: Typically 1-5 years depending on region.
Coverage: Manufacturing defects in materials and workmanship.
Exclusions: Damage from improper assembly, misuse, or normal wear.
Support: Contact IKEA customer service with proof of purchase.

Tip: Retain receipt and warranty information for future claims.

Troubleshooting

Issue	Possible Cause	Solution
Frame wobbles	Uneven floor or loose legs	Re-adjust leg height; tighten all bolts
Squeaking noise	Loose connections or friction	Tighten hardware; apply lubricant to joints if needed
Legs not adjusting	Threads dirty or cross-threaded	Clean threads; unscrew and re-align carefully
Slats not fitting	Incorrect slat size or orientation	Use compatible IKEA slats; align properly
Scratches on floor	Missing or damaged glides	Replace plastic glides; lift to move frame

Need Help? Visit IKEA website or contact customer support with model number.