IKEA TOKABO 103.580.13 Table Lamp instructions manual

The IKEA TOKABO 103.580.13 is a modern table lamp designed for ambient lighting. It features a sturdy base, a fabric shade, an integrated on/off switch, and uses a standard E26/E27 bulb (max 60W, not included). Below are key sections for safety, assembly, operation, care, and troubleshooting.

Features at a Glance

Key components: Fabric shade, Metal/plastic base, Integrated on/off switch, Standard bulb socket.

Assembly Instructions

Unpack all parts. Ensure you have base, shade, bulb (not included), and any hardware.

1. Attach base: If multi-part, screw components together firmly by hand.
2. Install bulb: Screw a standard E26/E27 bulb (max 60W) into socket.
3. Attach shade: Align shade with base fittings and secure (may twist or clip on).
4. Place lamp on stable, level surface.

WARNING! Do not assemble while plugged in. Ensure all parts are secure before use.

First-Time Setup

After assembly, plug into a standard 120V AC outlet.

1. Plug in: Insert plug into wall outlet.
2. Turn on: Use integrated switch to turn lamp on.
3. Test bulb: Ensure bulb illuminates properly.
4. Adjust placement: Position for desired lighting effect.

CAUTION! Use only recommended bulb type and wattage to prevent overheating.

Specifications

• Model: TOKABO 103.580.13
• Dimensions: Height approx. 40 cm (15.7 in)
• Bulb: 1 x E26/E27 base, max 60W (not included)
• Voltage: 120V AC, 60Hz
• Cord: 1.8 m (6 ft) with inline switch
• Materials: Fabric shade, metal/plastic base
• Weight: Approx. 1.2 kg (2.6 lbs)

Controls and Operation

Operation is via the integrated on/off switch located on the cord or base.

Switch: Flip or press to turn lamp ON/OFF.

Note: This lamp does not feature dimming functionality. For dimming, use a dimmable LED bulb and compatible external dimmer switch (not included).

Bulb Replacement

Always turn off and unplug lamp before replacing bulb.

1. Allow bulb to cool completely if recently on.
2. Gently unscrew old bulb counterclockwise.
3. Screw new E26/E27 bulb (max 60W) clockwise until snug.
4. Plug in and test.

Tip: Consider using LED bulbs for energy efficiency and lower heat output.

Placement Tips

For optimal use and safety.

1. Place on stable, level surface like a bedside table or desk.
2. Keep away from edges where it could be knocked over.
3. Ensure cord is not a tripping hazard.
4. Do not place near flammable materials (curtains, bedding).

Tip: Use as ambient lighting for reading or creating a cozy atmosphere.

Safety Information

Read all instructions before use.

• Use only with 120V AC outlet.
• Max bulb wattage: 60W. Exceeding this can cause fire.
• Do not use with damaged cord or plug.
• Not for outdoor use.
• Keep out of reach of young children.

WARNING! Risk of electric shock. Unplug before cleaning or maintenance.

Care & Cleaning

Unplug lamp and allow to cool before cleaning.

1. Shade: Use a soft brush or vacuum cleaner with brush attachment to remove dust.
2. Base: Wipe with a soft, dry cloth. For stains, use a slightly damp cloth, then dry immediately.
3. Cord: Wipe with dry cloth.

CAUTION! Do not immerse in water. Do not use abrasive cleaners or chemicals.

Warranty & Support

IKEA limited warranty applies. Refer to your IKEA guarantee for details.

For product support, assembly help, or spare parts:

• Visit: www.ikea-usa.com
• Contact IKEA customer service at 1-888-888-4532
• Bring proof of purchase to your local IKEA store.

Troubleshooting

Disposal: Dispose of according to local regulations for electronic waste.

Service: For issues not resolved above, contact IKEA support.