IKEA TIGERFINK 405.124.71 Storage instructions manual

The IKEA TIGERFINK 405.124.71 is a versatile storage unit designed for home organization, featuring durable construction, adjustable shelves, and a modern design. Below are key sections for safety, assembly, installation, usage, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. Installation & Placement 4. Specifications 5. Parts & Hardware 6. Usage Guidelines 7. Adjusting Shelves 8. Safety Features 9. Care & Cleaning 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Main frame, adjustable shelves, back panel, mounting hardware, wall attachment device.

Feature	Description
Adjustable shelves	Multiple height positions for flexible storage
Wall attachment device	Included for securing unit to wall (safety requirement)
Durable finish	Scratch-resistant surface for long-lasting appearance
Easy assembly	Designed for straightforward setup with included tools
Modern design	Clean lines suitable for various room styles
Weight capacity	Each shelf supports up to 15kg (33 lbs)
Dimensions	Optimized for standard room spaces
Material	Particleboard with melamine foil, ABS plastic fittings
Color options	Available in white and black-brown finishes
Ventilation	Designed with rear openings for air circulation

Assembly Instructions

Unpack and verify all parts before assembly. Work on a soft surface to prevent scratches.

Check contents: Compare parts with included parts list (Step 1 in manual).
Assemble main frame: Connect side panels to top and bottom pieces using cam locks.
Install back panel: Insert into grooves and secure with provided nails or screws.
Attach adjustable shelf supports: Insert metal pins at desired heights.
Place shelves: Rest shelves on installed supports.
Secure to wall: MUST attach wall bracket to prevent tipping (critical safety step).

WARNING! Unit is heavy; assemble with assistance. Always secure to wall to prevent tipping hazard.

Installation & Placement

Choose location carefully before final installation.

Select stable surface: Place on level, solid floor (not carpet alone).
Wall attachment: Locate wall studs; use appropriate screws for your wall type.
Clearance: Allow minimum 10cm (4 inches) from heat sources and vents.
Weight distribution: Place heavier items on lower shelves for stability.
Final check: Ensure all connections are tight and unit is securely anchored.

CAUTION! Do not place on uneven surfaces. Keep away from direct sunlight and moisture.

Specifications

Product dimensions: Width: 80cm (31.5"), Height: 120cm (47.25"), Depth: 40cm (15.75")
Shelf dimensions: 76cm x 38cm (29.9" x 15") each
Weight capacity: 15kg (33 lbs) per shelf, 60kg (132 lbs) total
Material: Particleboard, melamine foil, ABS plastic fittings
Color: White/Black-brown (as specified on packaging)
Package weight: 25kg (55 lbs)
Package dimensions: 85cm x 45cm x 15cm (33.5" x 17.7" x 5.9")
Warranty: 10-year limited warranty (see terms)

Parts & Hardware

All necessary hardware included. Front Panel: Main frame pieces, shelves, back panel.

Hardware included: Cam locks (10), screws (various sizes), wall attachment bracket, shelf support pins (16), dowels, Allen key.

Assembly tools needed: Phillips screwdriver, hammer (for back panel nails), stud finder (for wall mounting). Do not use power tools for cam locks - hand tighten only.

Usage Guidelines

Proper loading: Distribute weight evenly. AV1/AV2 for composite/S-Video. PC: VGA + audio.

Weight limits: Do not exceed 15kg per shelf or 60kg total.
Item placement: Place heaviest items on bottom shelf.
Avoid overhang: Keep items within shelf boundaries.
Electronic devices: Allow ventilation space for electronics.
Children's safety: Do not allow climbing; keep dangerous items out of reach.

Tip: Use shelf liners to protect surfaces from scratches.

Adjusting Shelves

Shelves adjustable in 3cm (1.2") increments.

Remove items: Empty shelf before adjustment.
Lift shelf: Gently lift straight up to disengage from pins.
Reposition pins: Move support pins to desired height (pre-drilled holes).
Replace shelf: Lower onto pins at new position.
Check stability: Ensure shelf sits evenly on all four pins.
Reload items: Redistribute weight evenly.

WARNING! Do not force shelves. Ensure pins are fully inserted before placing shelf.

Safety Features

Wall attachment bracket: MUST be used to prevent tipping. Anti-tip design: Included with unit. Child safety: Secure drawers/doors if applicable.

Care & Cleaning

Use only recommended cleaning methods to preserve finish.

Dust regularly: Use soft, dry cloth or microfiber duster.
Spot cleaning: Damp cloth with mild soap solution; wipe dry immediately.
Avoid: Abrasive cleaners, solvents, ammonia-based products.
Protect from: Direct sunlight, heat sources, excessive moisture.

CAUTION! Never use abrasive pads or harsh chemicals. Water can damage particleboard edges.

Warranty Information

10-year limited warranty from date of purchase. Covers manufacturing defects in materials. Does not cover damage from improper assembly, accidents, modifications, or normal wear. Proof of purchase required. For warranty claims, contact IKEA customer service with product number and receipt.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit wobbles	Uneven floor/loose connections	Check floor level; tighten all cam locks and screws.
Shelf sags	Overloaded/wrong pin placement	Reduce weight; ensure all four pins properly engaged.
Difficult assembly	Misaligned parts	Disassemble and restart; ensure all dowels properly inserted.
Scratches during assembly	Working on hard surface	Assemble on carpet or cardboard; handle parts carefully.
Missing parts	Packaging error	Contact IKEA for replacement parts (provide product number).
Doors/drawers misaligned	Improper adjustment	Adjust hinges/sliders per manual instructions.

Replacement parts: Available through IKEA customer service.

Support: IKEA customer service: 1-888-888-4532; www.ikea.com