IKEA TIDIG 002.626.57 Ceiling Lights instructions manual

The IKEA TIDIG 002.626.57 is a modern ceiling light fixture designed for general room illumination. It features a clean, minimalist design, energy-efficient LED light source, and a fixed installation for ceilings. The light provides diffused, comfortable lighting suitable for living rooms, bedrooms, or hallways. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Safety Information 2. Package Contents 3. Technical Specifications 4. Installation Instructions 5. Operation & Use 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support 9. Disposal Information

Safety Information

Read all instructions carefully before installation and use. Failure to follow safety guidelines may result in electric shock, fire, or injury.

WarningDescription
Electrical SafetyInstallation must be performed by a qualified electrician. Ensure power is switched OFF at the circuit breaker before beginning.
Mounting SurfaceInstall only on a flat, stable ceiling that can support the light's weight. Do not install on flammable surfaces.
EnvironmentFor indoor use only. Not suitable for bathrooms, saunas, or other damp locations unless specifically rated.
Bulb/LEDUses integrated non-replaceable LED module. Do not attempt to open or repair the light source.
ChildrenKeep packaging materials away from children to avoid risk of suffocation.

Package Contents

Unpack and verify all parts are present before starting installation.

  1. Ceiling light fixture (main body with integrated LEDs).
  2. Mounting bracket with screws.
  3. Wire connectors (terminal block or wire nuts).
  4. Installation manual (this document).

NOTE: If any part is missing or damaged, do not proceed with installation. Contact IKEA customer service.

Technical Specifications

Installation Instructions

TOOLS REQUIRED: Screwdriver, Wire Stripper, Ladder, Voltage Tester, Drill (if needed for mounting).

  1. Turn Off Power: Switch off the circuit breaker for the room at the main electrical panel.
  2. Remove Old Fixture (if present): Carefully disconnect and remove the existing ceiling light.
  3. Prepare Mounting Bracket: Attach the provided mounting bracket to the ceiling electrical box using the supplied screws. Ensure it is secure.
  4. Connect Wires:
    • Connect the fixture's wires to the house wires: Black (or Brown) to Live/Hot (usually black), White (or Blue) to Neutral (usually white), Green/Yellow to Ground (usually bare copper or green).
    • Use the provided wire connectors. Secure connections and tuck wires neatly into the ceiling box.
  5. Attach Fixture: Align the fixture with the mounting bracket. Secure it in place using the provided screws or locking mechanism. Do not over-tighten.
  6. Final Check: Ensure the fixture is firmly attached and all wires are concealed. Install any decorative covers or screws.

WARNING! If you are unsure about any step, consult a licensed electrician. Incorrect installation can be dangerous.

Operation & Use

Once installed, restore power at the circuit breaker.

  1. Turning On/Off: Use the existing wall switch connected to the light circuit.
  2. Light Output: The light provides immediate, full brightness when switched on. No warm-up time is required.
  3. Dimming (if applicable): If the model is dimmable, use only compatible dimmer switches as specified. Flickering may occur with incompatible dimmers.

Tip: For optimal light distribution, ensure the fixture is clean and free from obstructions.

Care & Maintenance

To ensure longevity and performance, clean the fixture regularly.

  1. Turn Off & Cool: Always switch off the light and allow it to cool before cleaning.
  2. Cleaning: Use a soft, dry or slightly damp cloth to wipe the diffuser and exterior. Do not use abrasive cleaners, solvents, or chemicals.
  3. Inspection: Periodically check that the fixture is securely mounted and shows no signs of damage (cracks, loose parts).

CAUTION! Never immerse the fixture in water or other liquids. Do not spray cleaning agents directly onto the light.

Troubleshooting

SymptomPossible CauseCorrective Action
Light does not turn onPower off, faulty switch, loose connectionCheck circuit breaker and wall switch. Ensure power is restored. Verify wire connections are secure. If problem persists, consult an electrician.
Light flickersLoose connection, incompatible dimmer (if dimmable)Check and tighten all electrical connections. If dimmable, ensure a compatible dimmer switch is used.
Reduced light outputDirt/dust on diffuser, end of LED lifeClean the diffuser as per maintenance instructions. Integrated LEDs have a long lifespan; significant dimming may indicate a fault.
Buzzing soundIncompatible dimmer, faulty driverIf dimmable, try a different compatible dimmer. If buzzing persists without a dimmer, the unit may be defective.
Fixture feels hotNormal operation, poor ventilationLEDs generate some heat. Ensure the fixture is not covered or installed in an enclosed space not rated for it.

Note: The integrated LED light source is not user-replaceable. If it fails, the entire fixture may need replacement.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included with your purchase or available at IKEA stores for specific terms and duration.

Have your product number (002.626.57) and receipt ready when contacting support.

Disposal Information

This product contains electronic components and must not be disposed of with household waste.

At the end of its life, please:

  1. Return it to an IKEA store for recycling (in many regions).
  2. Or, dispose of it at an authorized electronic waste (e-waste) recycling facility in accordance with local regulations.

Proper disposal helps conserve resources and protects the environment.

IKEA TIDIG 002.626.57 Ceiling Lights instructions manual © - All Rights Reserved 2025