IKEA TARVA 704.864.99 3 Drawer Chest instructions manual

The IKEA TARVA 704.864.99 is a 3-drawer chest made from solid pine wood, designed for simple, functional storage. It features a clean, natural look that can be stained, painted, or left untreated. Below are key sections for safety, assembly, parts list, instructions, care, and warranty information.

1. Parts & Hardware 2. Assembly Instructions 3. Safety Information 4. Product Specifications 5. Care & Maintenance 6. Troubleshooting 7. Warranty & Support

Parts & Hardware

All components included in the package. Check contents before assembly.

Part Name	Quantity	Description
Chest Frame (Side Panels)	2	Solid pine side panels
Top Panel	1	Solid pine top board
Bottom Panel	1	Solid pine base board
Drawer Fronts	3	Solid pine drawer fronts
Drawer Bottoms	3	Fiberboard drawer bases
Drawer Slides	6	Metal side rails for drawers
Wooden Dowels	16	8mm diameter wooden connectors
Cam Locks	10	Plastic cam lock fasteners
Screws	Various	Assembly screws included
Allen Key	1	Tool for cam lock assembly

Assembly Instructions

Follow steps in order. Allow approximately 60-90 minutes for assembly.

Prepare Workspace: Lay out all parts on a clean, soft surface to avoid scratches.
Assemble Frame: Connect side panels to top and bottom panels using wooden dowels and cam locks.
Attach Back Panel: Secure the back panel to the frame using provided screws.
Install Drawer Slides: Mount drawer slides to the inside of the frame according to markings.
Assemble Drawers: Connect drawer fronts, sides, and bottoms. Attach drawer slides to drawer sides.
Insert Drawers: Slide drawers into the frame, ensuring they glide smoothly.
Final Check: Tighten all fasteners. Ensure chest is stable on floor.

WARNING! Assemble on a flat surface. Use two people for lifting and positioning larger panels.

Safety Information

Important safety guidelines for assembly and use.

Tip-Over Risk: This chest can tip over if not properly anchored to the wall. Use the included wall attachment device and secure to a stud.
Children: Do not let children climb or hang on drawers or furniture.
Assembly: Follow instructions precisely. Do not use power tools unless specified; overtightening can damage wood.
Weight Limit: Do not exceed 50 lbs per drawer. Distribute weight evenly.
Location: Place on a dry, level surface away from direct heat sources or high humidity.

CAUTION! Failure to anchor furniture to the wall can result in serious injury or death from tip-over.

Product Specifications

Product Name: TARVA 3-drawer chest
Article Number: 704.864.99
Material: Solid pine, Fiberboard, Metal fittings
Finish: Untreated pine (can be stained, painted, or oiled)
Dimensions: Width: 31 ½" (80 cm), Height: 37 ¾" (96 cm), Depth: 18 ½" (47 cm)
Drawer Dimensions: Interior approx. 28 ¾" W x 15 ¾" D x 6 ¼" H (73x40x16 cm)
Weight: 55 lbs (25 kg)
Max Load: 50 lbs (22.7 kg) per drawer
Warranty: 10-year limited warranty (see terms)

Care & Maintenance

To maintain the appearance and longevity of your chest.

Cleaning: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
Wood Care: If left untreated, dust regularly. If stained or oiled, reapply treatment as needed per product instructions.
Drawer Slides: Keep slides clean and free of debris. A light application of furniture wax or silicone spray can ensure smooth operation.
Avoid: Direct sunlight, heat sources, and excessive moisture to prevent warping or fading.

Tip: Place felt pads under items on the top surface to prevent scratches.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer sticks or doesn't close	Misaligned slides or overloading	Check slide alignment; ensure drawer is not overloaded; clean slides.
Furniture wobbles	Uneven floor or loose fasteners	Check that all cam locks and screws are tight; use shims under legs if floor is uneven.
Gaps between panels	Incomplete cam lock engagement	Disassemble step and ensure dowels are fully inserted and cam locks are turned to locked position.
Wood splintering during assembly	Forcing parts or misaligned dowels	Do not force parts. Ensure dowel holes align perfectly before joining.
Missing part	Packaging error	Contact IKEA customer service with article number (704.864.99) for replacement parts.

Warranty & Support

IKEA offers a 10-year limited warranty for this product under normal domestic use. The warranty covers material and manufacturing defects.

For Support:

Visit the IKEA website: www.ikea.com
Contact IKEA Customer Service: 1-888-888-4532
Visit your local IKEA store with your receipt and article number (704.864.99).

Wall Anchoring Kit: Included with purchase. Anchoring to the wall is mandatory for safety.