IKEA TÅGARP 904.863.99 Floor Lamp instructions manual

The IKEA TÅGARP 904.863.99 is a modern floor lamp featuring a metal base, adjustable height, fabric shade, and energy-efficient bulb compatibility. Designed for easy assembly and versatile placement in living rooms, bedrooms, or offices. Below are key sections for safety, parts list, assembly instructions, operation, care, and troubleshooting.

1. Parts & Components 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Operation & Controls 6. Bulb Replacement 7. Placement & Stability 8. Care & Cleaning 9. Warranty Information 10. Troubleshooting

Parts & Components

Key components included in package: Metal base tube sections, fabric shade, lamp socket assembly, power cord with foot switch, screws and fasteners, assembly tool.

Part	Description
Base tube sections (3)	Adjustable height metal tubes
Fabric shade	White/black fabric diffuser
Lamp socket assembly	E26/E27 socket with wiring
Power cord with foot switch	On/off foot pedal control
Screws and fasteners	For securing components
Assembly tool	Hex key included
Instruction manual	This document

Safety Information

Read all instructions before assembly and use.

Use only with recommended bulb type (Max 13W LED or 60W incandescent).
Ensure lamp is on stable, level surface to prevent tipping.
Keep away from water, moisture, and heat sources.
Unplug before assembly, cleaning, or bulb replacement.

WARNING! Risk of electric shock. Do not disassemble socket or modify cord. Keep cord away from heated surfaces.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Tools needed: None (hex key included).

Connect base tubes: Insert smallest tube into medium, then into largest base section. Tighten set screws with hex key.
Attach socket assembly: Slide socket holder onto top tube. Secure with provided screw.
Install fabric shade: Expand shade frame, attach to socket assembly clips until click is heard.
Route power cord: Thread cord through tube channels from base to socket.
Install bulb: Screw in compatible bulb (not included). Do not exceed wattage rating.
Place foot switch: Position foot pedal near base for easy access.

CAUTION! Ensure all connections are tight and cord is not pinched during assembly.

Specifications

Model: TÅGARP 904.863.99
Height: Adjustable 48" - 60" (122-152 cm)
Base Diameter: 9.8" (25 cm)
Shade Material: Polyester fabric
Frame Material: Steel, epoxy/polyester powder coating
Socket Type: E26/E27 standard
Bulb Compatibility: Max 13W LED or 60W incandescent
Cord Length: 78" (198 cm)
Voltage: 120V AC, 60Hz (North America)
Weight: 5.5 lbs (2.5 kg) assembled

Operation & Controls

Power control via foot switch on cord. No dimming function included.

Operation: Plug into standard wall outlet. Press foot switch to turn on/off. Allow bulb to cool before touching shade.

Height Adjustment: Loosen set screws on tube joints, adjust to desired height, retighten screws securely.

Tip: For even light distribution, position lamp in corner or beside furniture.

Bulb Replacement

Compatible with E26/E27 base bulbs. Recommended: LED for energy efficiency.

Unplug lamp and allow bulb to cool completely.
Gently press fabric shade upward to release from clips.
Unscrew old bulb counterclockwise.
Screw in new bulb (max 13W LED or 60W incandescent).
Reattach shade by pressing onto clips until secure.
Plug in and test with foot switch.

WARNING! Do not use bulbs exceeding recommended wattage to prevent overheating.

Placement & Stability

Place on flat, stable surface away from foot traffic.

Avoid placement near curtains, bedding, or flammable materials.
Keep cord away from walkways to prevent tripping.
Do not place in humid areas (bathrooms, outdoors).
Ensure all tube joints are tightened for stability.

Tip: Use felt pads under base if placing on delicate flooring.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for metal parts.

Fabric Shade: Use vacuum with brush attachment or soft duster. Do not wash or use liquids.

Metal Parts: Wipe with damp cloth if needed, then dry immediately.

CAUTION! Do not use abrasive cleaners, solvents, or water on electrical parts.

Warranty Information

Limited warranty: 1 year from date of purchase against manufacturing defects. Proof of purchase required. Warranty does not cover bulbs, improper use, or normal wear. For service, contact IKEA customer support at 1-888-888-4532 or visit www.ikea.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp doesn't turn on	Bulb faulty/not plugged in	Replace bulb; ensure plug is fully inserted in outlet; check foot switch.
Lamp flickers	Loose bulb or connection	Tighten bulb; check socket wiring (if loose, discontinue use).
Lamp wobbles	Uneven surface/loose joints	Place on level surface; tighten all set screws on tubes.
Shade falls off	Clips not engaged	Press shade firmly onto clips until click is heard.
Overheating	Bulb wattage too high	Use only recommended bulb type; unplug and allow to cool.

Disposal: Dispose of according to local regulations. Recycle metal and plastic parts where available.

Support: 1-888-888-4532; www.ikea.com