IKEA TÅGARP 704.863.95 Floor Lamp instructions manual

The IKEA TÅGARP 704.863.95 is a modern floor lamp featuring a metal frame, adjustable shade, and integrated on/off switch. Designed for use with a maximum 13W LED bulb (E27 base, not included), it provides ambient lighting for living rooms, bedrooms, or offices. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Safety Information 2. Package Contents 3. Assembly Instructions 4. Specifications 5. Operation & Controls 6. Bulb Replacement 7. Care & Maintenance 8. Regulatory Information 9. Troubleshooting

Safety Information

Read all instructions before assembly and use.

  1. Use only with a maximum 13W LED bulb (E27 base).
  2. Ensure the lamp is placed on a stable, level surface.
  3. Do not use in damp or wet locations (e.g., bathroom).
  4. Unplug before assembly, bulb replacement, or cleaning.
  5. Keep away from children and pets to prevent tipping.
  6. Do not cover the lampshade or place near flammable materials.

WARNING! Risk of electric shock or fire if used with incorrect bulb or in unsuitable conditions.

Package Contents

Inspect contents upon unboxing. Contact IKEA if any parts are missing.

PartQuantityDescription
A. Base1Weighted metal base
B. Pole1Adjustable metal pole
C. Shade1Fabric/paper shade with frame
D. Socket assembly1E27 socket with integrated switch
E. Hardware pack1Screws, washers, Allen key
F. Power cord16 ft cord with plug

Assembly Instructions

Estimated assembly time: 15–20 minutes. Tools required: Allen key (provided).

  1. Attach pole (B) to base (A): Insert pole into base hole; secure with provided screw using Allen key.
  2. Connect socket assembly (D): Thread wires through pole; attach socket to top of pole.
  3. Mount shade (C): Place shade frame over socket; secure with locking mechanism or screws.
  4. Route power cord (F): Feed cord through pole channel; plug into socket assembly.
  5. Insert bulb: Use max 13W LED E27 bulb (not included). Do not overtighten.
  6. Test: Plug into wall outlet; toggle switch to ensure operation.

Tip: Ensure all connections are tight and cord is not pinched.

Specifications

Operation & Controls

Toggle the integrated switch on the socket to turn the lamp on/off. Adjust the pole height by loosening the locking knob, setting desired height, and retightening. Tilt the shade for directional lighting (if adjustable model).

Note: Lamp may become warm during extended use; this is normal. Ensure adequate ventilation.

Bulb Replacement

  1. Unplug lamp and allow bulb to cool completely.
  2. Remove shade if necessary (consult assembly steps).
  3. Unscrew old bulb counterclockwise.
  4. Screw in new max 13W LED E27 bulb clockwise. Do not exceed wattage.
  5. Replace shade and plug in lamp.

CAUTION! Use only LED bulbs to prevent overheating. Incandescent or higher-wattage bulbs may damage lamp.

Care & Maintenance

Unplug before cleaning. Wipe metal parts with a dry, soft cloth. For shade, use a vacuum with brush attachment or a dry cloth. Do not use water, chemicals, or abrasive cleaners.

Storage: Disassemble if storing long-term; keep in a dry place.

Regulatory Information

This product complies with UL standards for safety. CE marked for European conformity. Copyright © IKEA of Sweden AB. For support, visit www.ikea.com or contact IKEA customer service at 1-888-888-4532.

Troubleshooting

SymptomPossible CauseCorrective Action
Lamp does not turn onNo power/bulb issueCheck outlet; ensure plug is secure; replace bulb.
Flickering lightLoose bulb or faulty bulbTighten bulb; try a different bulb.
Lamp wobblesUneven surface/loose assemblyPlace on level surface; tighten base and pole screws.
OverheatingWrong bulb type/wattageUse only max 13W LED bulb; ensure ventilation.
Switch not workingInternal faultUnplug; contact IKEA support for repair/replacement.

Warranty: Limited 1-year warranty. Proof of purchase required.

Service: 1-888-888-4532; www.ikea.com

IKEA TÅGARP 704.863.95 Floor Lamp instructions manual © - All Rights Reserved 2025