IKEA SVARTÖ 102.853.28 Umbrella Base Instructions Manual

The IKEA SVARTÖ 102.853.28 is a sturdy, weather-resistant umbrella base designed to hold and stabilize patio umbrellas. It features a classic black stone-look design, a large water/sand fill chamber for added weight, a secure umbrella pole locking mechanism, and integrated handles for easy transport. Below are key sections for safety, features, assembly, filling, use, care, and troubleshooting.

1. Features at a Glance 2. Parts & Tools Included 3. Assembly Instructions 4. Filling the Base 5. Installing Your Umbrella 6. Moving & Storage 7. Care & Maintenance 8. Safety Information 9. Specifications 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Main base body, Fill cap, Umbrella pole sleeve with locking knob, Two transport handles.

Feature	Description
Material	Durable, UV-resistant polypropylene with stone-look finish
Fill Chamber	Large capacity for water or sand to provide stability
Pole Sleeve Diameter	Fits umbrella poles up to 2.5 inches (approx. 63 mm)
Locking Mechanism	Knob-tightened clamp to secure the umbrella pole
Transport Handles	Two integrated handles for easy carrying when empty
Drain Plug	Allows for easy emptying of water before storage
Weather Resistance	Designed for outdoor use in various conditions

Parts & Tools Included

Unpack and verify all parts are present and undamaged.

Main Base Body (1): The primary container with pole sleeve.
Fill Cap (1): Screws onto the fill opening.
Locking Knob (1): Pre-assembled on the pole sleeve clamp.
Instruction Manual (1): This document.

Tools You May Need: Garden hose or funnel (for filling), Source of sand (optional).

Assembly Instructions

The base comes mostly assembled. Follow these steps for final preparation.

Inspect: Check the base for any shipping damage or cracks.
Position: Place the base on a flat, level surface where you intend to use your umbrella.
Prepare Locking Knob: Turn the locking knob counter-clockwise to loosen the clamp inside the pole sleeve fully.

CAUTION! Ensure the base is on a stable surface before filling to prevent tipping.

Filling the Base

For optimal stability, fill the base with water or sand.

Remove Fill Cap: Unscrew the fill cap from the top of the base.
Choose Filler:
- Water (Recommended): Easy to fill and empty. Use a garden hose.
- Sand: Provides permanent weight. Use dry sand and a funnel.
Fill: Slowly add your chosen filler until the chamber is full. Do not overfill.
Replace Cap: Securely screw the fill cap back on.

WARNING! A filled base is very heavy. Do not attempt to move it once filled. Always empty water before moving or storing to avoid injury.

Installing Your Umbrella

Once the base is filled and in position, install your umbrella.

Insert Pole: Slide your umbrella pole into the center sleeve of the base.
Adjust Height: Lower the umbrella until the pole rests firmly on the bottom of the base.
Secure Pole: Turn the locking knob clockwise to tighten the clamp firmly around the umbrella pole.
Check Stability: Gently try to wobble the umbrella. If it moves, tighten the locking knob further.
Open Umbrella: Open your patio umbrella as per its instructions.

Tip: On windy days, close the umbrella when not in use to prevent tipping.

Moving & Storage

To Move (Empty): Use the two integrated handles. Ensure the base is completely empty of water or sand.

To Store for Winter:

Close and remove the umbrella.
Unscrew the drain plug (if equipped) or the fill cap to empty all water.
Tip the base to ensure it's completely dry inside.
Store in a cool, dry place indoors or in a shed.

Care & Maintenance

Clean with mild soapy water and a soft cloth. Rinse with clean water. Do not use abrasive cleaners or solvents.

CAUTION! Never use pressure washers or harsh chemicals, as they may damage the finish.

Safety Information

This base is designed for outdoor use with patio umbrellas only.
Always place on a flat, level, and stable surface.
Do not sit, stand, or place heavy objects on the base.
Keep children from playing on or around the filled base.
In high winds, close the umbrella and consider additional anchoring.
A filled base is extremely heavy. Lift only when empty, using proper lifting techniques.

Specifications

Article Number: 102.853.28
Product Name: SVARTÖ
Type: Umbrella Base
Color: Black
Material: Polypropylene, plastic
Approx. Dimensions (LxWxH): 17" x 17" x 9" (43 cm x 43 cm x 23 cm)
Pole Sleeve Inner Diameter: Approx. 2.5 in (63 mm)
Weight (Empty): Approx. 6.6 lbs (3 kg)
Weight Capacity (Filled): Provides stability for most standard patio umbrellas.

Warranty & Support

Refer to the IKEA warranty terms provided with your purchase or available at www.IKEA.com. This product is designed for residential outdoor use. For missing parts or assembly support, contact your local IKEA store or visit the IKEA website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Umbrella is wobbly	Base not filled enough / Locking knob loose	Ensure base is completely full. Tighten the locking knob firmly.
Base tips in wind	Umbrella too large / Wind too strong	Close umbrella in high winds. Consider a heavier filler like sand or a smaller umbrella.
Pole doesn't fit	Pole diameter too large	Measure your umbrella pole. The SVARTÖ base fits poles up to approx. 2.5 inches (63 mm).
Water leaking from cap	Fill cap not tight / Seal damaged	Ensure cap is screwed on tightly. Inspect the rubber seal for damage.
Difficult to move	Base is still filled	Empty all water or sand using the drain plug or by tipping before attempting to move.

Recycling: At end of life, dispose of according to local plastic recycling regulations.

IKEA Customer Support: www.IKEA.com or visit your local IKEA store.