IKEA SVARTRÅ 805.218.07 String Lights instructions manual

The IKEA SVARTRÅ 805.218.07 is a decorative string light set designed for indoor use, featuring multiple LED bulbs on a flexible wire, a plug-in power adapter, and various hanging or mounting options. It provides ambient lighting for home decoration, parties, or seasonal displays. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using the Lights 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED string lights, Power adapter, Plug, Hanging clips or hooks, Control switch (if applicable).

FeatureDescription
LED BulbsEnergy-efficient, long-lasting LED lights
Power AdapterConverts AC power to low voltage for safe operation
Flexible WireAllows shaping and draping for decorative arrangements
Control SwitchOn/Off switch for easy operation (if included)
Hanging ClipsFor secure attachment to walls, ceilings, or other surfaces
Plug TypeStandard plug for wall outlet connection
LengthTotal length of light string as specified
Bulb SpacingDistance between individual LED bulbs
Indoor Use OnlyDesigned for indoor environments only
Decorative DesignWarm white or multicolor options (as per model)

Installation

Unpack and inspect contents. Plan your layout before installation.

  1. Check components: Ensure all parts are present and undamaged.
  2. Plan arrangement: Decide where to place the lights (e.g., along walls, around windows).
  3. Attach hanging clips: Use provided clips or hooks to secure the wire (avoid nails or staples).
  4. Arrange the lights: Drape or shape the wire as desired, ensuring it is not stretched tightly.
  5. Keep away from heat sources and flammable materials.

WARNING! For indoor use only. Do not install near water sources or in damp locations. Do not cover lights with fabric or other materials.

First-Time Setup

Connect to power and test the lights.

  1. Plug in: Insert the power adapter plug into a standard wall outlet.
  2. Turn on: Use the control switch (if available) or ensure the plug is fully inserted.
  3. Test lights: All LEDs should illuminate evenly. If not, check connections.
  4. Adjust arrangement: Fine-tune the positioning of the lights as needed.
  5. Secure loose wires: Use clips to keep wires tidy and prevent tripping hazards.

CAUTION! Do not connect multiple light strings together unless specified. Use only the provided power adapter.

Specifications

Controls and Settings

Simple operation with plug and optional switch.

Power Control: Plug into outlet to turn on; unplug to turn off. Some models include an inline switch for convenience.

No Dimming or Timing: This model does not include dimming or timer functions. For extended use, unplug when not needed.

Safety Note: Always turn off and unplug before handling, adjusting, or cleaning the lights.

Connecting to Power

Use only the provided power adapter and plug into a suitable outlet.

  1. Ensure the power adapter and lights are dry and undamaged.
  2. Plug the adapter into a standard 120V AC wall outlet.
  3. Do not use extension cords unless they are rated for the power load.
  4. Do not overload electrical circuits.

Tip: Place the adapter in an accessible location for easy unplugging.

Using the Lights

Designed for decorative indoor lighting.

  1. Turn on: Plug in or use switch to illuminate LEDs.
  2. Enjoy ambient light: Use for mood lighting, parties, or seasonal decor.
  3. Turn off: Unplug or switch off when not in use to save energy and prolong life.
  4. Repositioning: Always turn off and unplug before moving or adjusting the lights.

WARNING! Do not use outdoors or in wet locations. Do not immerse in water. Keep away from children and pets to prevent chewing or pulling.

Safety Features

Low voltage operation reduces risk. Built-in fuse or overload protection in adapter.

Important: If the lights flicker, dim, or stop working, unplug immediately and check for damage. Do not attempt to repair cut or damaged wires; replace the entire set.

Care & Cleaning

Unplug and allow to cool before cleaning. Use a dry, soft cloth to gently wipe the wire and bulbs. Do not use liquids, solvents, or abrasive cleaners.

CAUTION! Never pull on the wire to unplug. Always grasp the plug. Store in a cool, dry place when not in use, loosely coiled to prevent wire damage.

Regulatory Information

Complies with relevant safety standards for low-voltage decorative lighting. This product is intended for indoor use in dry locations only. Copyright and design rights owned by Inter IKEA Systems B.V. For more information, recycling, or support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

SymptomPossible CauseCorrective Action
Lights do not turn onNo power / Loose connectionCheck if outlet is working; ensure plug is fully inserted; try a different outlet.
Partial lights outLoose or damaged bulbGently check and reseat each LED bulb in its socket (if removable). If not, the set may need replacement.
Flickering lightsFaulty connection / Adapter issueCheck all connections; ensure adapter is not overheated. Replace adapter if necessary.
Adapter is hotOverload / VentilationUnplug immediately. Ensure adapter is not covered and has air circulation. Do not use if overheating persists.
Wire is damagedPhysical stress / ChewingUnplug and discontinue use. Do not attempt to repair cut or exposed wires. Replace the entire light set.

Disposal: Dispose of according to local electronic waste regulations. Do not dispose of with household trash.

Support: Visit www.ikea.com or contact your local IKEA customer service for assistance.

IKEA SVARTRÅ 805.218.07 String Lights instructions manual © - All Rights Reserved 2025