IKEA SVARTNORA 405.047.77 Lighting instructions manual

The IKEA SVARTNORA 405.047.77 is a modern lighting fixture designed for indoor use, featuring energy-efficient LED technology, adjustable brightness levels, and a sleek Scandinavian design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operation Modes 8. Smart Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED light panel, remote control, wall mount bracket, power adapter, installation hardware.

Feature	Description
LED Panel	Energy-efficient LED lighting with long lifespan
Remote Control	Wireless control for brightness and modes
Wall Mount Bracket	For secure wall installation
Power Adapter	AC to DC power conversion
Brightness Control	Adjustable from 10% to 100% brightness
Color Temperature	Adjustable warm to cool white (2700K-6500K)
Timer Function	Auto-off timer (30 min, 60 min, 120 min)
Memory Function	Remembers last used settings
Child Lock	Prevents accidental setting changes
Energy Saving Mode	Automatically reduces brightness after 1 hour

Installation

Unpack and inspect all contents. Ensure proper mounting surface.

Choose location: Select wall area away from moisture and heat sources.
Mount bracket: Use included screws to secure bracket to wall.
Attach light panel: Hang panel on bracket until it clicks into place.
Connect power: Plug power adapter into outlet and connect to light.
Secure cables: Use cable clips to organize power cord.

WARNING! Ensure power is off during installation. Use appropriate wall anchors for your wall type.

First-Time Setup

Connect to power; follow initial setup procedure.

Power on: Plug in adapter and press power button on remote or panel.
Pair remote: Point remote at light and press POWER + BRIGHT UP for 3 seconds.
Set default brightness: Use remote to set preferred default level.
Configure timer: Press TIMER button to set auto-off duration.
Enable child lock: Hold LOCK button for 5 seconds if needed.

CAUTION! Do not look directly at LED panel at close range when at maximum brightness.

Specifications

Model: SVARTNORA 405.047.77
Power Consumption: 15W maximum
Lumen Output: 1200 lumens maximum
Color Temperature: 2700K-6500K adjustable
CRI: >80
Input Voltage: 100-240V AC, 50/60Hz
Output Voltage: 24V DC
Dimensions: 400mm x 300mm x 25mm
Weight: 1.2 kg
Operating Temperature: 0°C to 40°C
Warranty: 2 years limited warranty

Controls and Settings

Control via physical buttons on panel or wireless remote.

Panel Controls: Power button, Brightness up/down, Mode selector.

Remote Controls: POWER, BRIGHTNESS +/-, COLOR TEMP +/-, TIMER (30/60/120 min), MODE (Reading, Relax, Work, Night Light), LOCK, MEMORY.

Settings Menu: Hold MODE button for 3 seconds to access advanced settings including factory reset, energy saving level, and auto-dim timing.

Connecting to Power

Use only included power adapter. Ensure proper voltage match.

Turn off power at wall outlet before connecting.
Connect DC plug to light panel input port.
Plug AC adapter into wall outlet.
Turn on power at outlet.
Verify power indicator LED is lit (green).

Tip: Use surge protector for added safety in areas with unstable power.

Operation Modes

Four preset modes optimized for different activities.

Reading Mode: Bright, cool white light (5000K, 100% brightness)
Relax Mode: Warm, dim light (2700K, 40% brightness)
Work Mode: Neutral white (4000K, 80% brightness)
Night Light: Very dim warm light (2700K, 10% brightness)
Custom Mode: Save your preferred settings by holding MEMORY button

Note: Cycle through modes by pressing MODE button on remote.

Smart Features

Timer Function: Set auto-off timer for 30, 60, or 120 minutes. Memory Function: Remembers last brightness and color temperature settings. Child Lock: Disable all buttons except power when activated. Energy Monitor: Tracks power consumption in settings menu.

Care & Cleaning

Unplug from power before cleaning. Use soft, dry cloth only.

Dust regularly with microfiber cloth.
For stubborn marks, use slightly damp cloth (water only).
Never use chemical cleaners, abrasives, or solvents.
Ensure light is completely dry before reconnecting to power.

CAUTION! Do not immerse in water or other liquids. Avoid excessive pressure on LED panel.

Regulatory Information

CE Certified: Complies with European safety standards. RoHS Compliant: Free of hazardous substances. Energy Class: A+ rating. Waste Electrical: Dispose of properly according to local regulations. For support, visit www.ikea.com or contact IKEA customer service at 1-800-434-4532.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light won't turn on	Power connection	Check power adapter connection; verify outlet is working; check circuit breaker.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear line of sight to IR receiver; re-pair remote.
Flickering light	Loose connection	Check all connections; try different outlet; ensure proper voltage.
Dim output	Settings/brightness	Adjust brightness setting; check if in Night Light mode; reset to factory settings.
Overheating	Ventilation	Ensure adequate ventilation; reduce brightness; check ambient temperature.
Color temperature not changing	Mode restriction	Some modes lock color temperature; switch to Custom mode for full control.

Reset Procedure: Unplug power, wait 30 seconds, hold panel power button while plugging back in, continue holding for 10 seconds.

Service: 1-800-434-4532; www.ikea.com