IKEA SVALLET 803.584.96 Work Lamp instructions manual

The IKEA SVALLET 803.584.96 is a modern, adjustable work lamp designed for focused lighting on desks, workbenches, or reading areas. It features a flexible gooseneck arm, an energy-efficient LED light source, a stable weighted base, an on/off switch, and a sleek, minimalist design. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Positioning & Adjustment 7. Maintenance & Bulb Replacement 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: LED light head, Flexible gooseneck arm, Weighted metal base, On/Off switch, Power cord with plug.

Feature	Description
LED Light Head	Energy-efficient, long-lasting LED light source
Flexible Gooseneck Arm	Allows precise positioning and angle adjustment
Weighted Metal Base	Provides stability and prevents tipping
On/Off Switch	Simple push-button control located on the base or cord
Power Cord	Standard plug for 120V AC outlet
Adjustable Light Direction	Head can be tilted and rotated
Minimalist Design	Sleek finish suitable for various decor styles
Desk Clamp Option (if included)	Alternative mounting for space-saving

Assembly Instructions

Unpack all parts and check contents against the parts list. Ensure you have a clean, flat surface.

Attach the base: If separate, screw the weighted base onto the bottom of the lamp stem.
Connect the gooseneck: Insert the threaded end of the gooseneck arm into the socket on the base and tighten securely.
Attach the light head: Screw the LED light head onto the top of the gooseneck arm. Do not over-tighten.
Route the power cord: Ensure the cord is not pinched or twisted.

WARNING! Assemble on a soft surface to avoid scratching. Do not force parts; they should fit together easily.

First-Time Setup

Place the lamp in its desired location and connect to power.

Choose location: Place on a stable, level surface near a power outlet.
Plug in: Insert the power plug into a standard 120V AC wall outlet.
Test operation: Press the On/Off switch to ensure the LED lights up.
Adjust position: Bend the gooseneck and tilt the head to direct light where needed.

CAUTION! Ensure the lamp is placed on a stable surface away from edges where it could be knocked over.

Specifications

Model: SVALLET 803.584.96
Light Source: Integrated LED (non-replaceable in standard model)
Color Temperature: 4000K (Cool White) or as specified
Lumen Output: Approximately 300-400 lumens
Power Consumption: 5W
Power Supply: 120V AC, 60Hz
Cord Length: Approximately 5 feet (1.5 meters)
Base: Weighted metal
Arm: Flexible gooseneck, adjustable
Dimensions (approx.): Height: 15-20 inches, Base diameter: 5-6 inches
Weight: 2-3 lbs (0.9-1.4 kg)

Controls and Operation

The lamp is operated via a single On/Off switch. No dimming or color adjustment is available on the base model.

Switch Location: Typically on the power cord or integrated into the base.

Operation: Press once to turn ON. Press again to turn OFF.

Positioning: Grip the gooseneck firmly and bend to desired shape. Adjust the light head by tilting up/down and rotating side-to-side.

Positioning & Adjustment

The flexible arm allows for a wide range of motion to direct light exactly where needed.

For desk work: Position the lamp to the side or behind you to avoid glare on your work surface.
For reading: Direct the light onto the book or e-reader from above or slightly to the side.
For crafts: Bend the arm to bring the light close to your hands without obstructing movement.
Locking position: The gooseneck will hold its shape once released.

Tip: Avoid bending the gooseneck at extreme angles repeatedly to prolong its life.

Maintenance & Bulb Replacement

This model features an integrated LED light source designed to last for years. It is not user-replaceable.

If the LED fails: The entire lamp unit may need to be replaced, as the LED is not a serviceable part.
Power check: If the lamp does not light, first check the outlet and power cord.

WARNING! Do not attempt to disassemble the light head. There are no user-serviceable parts inside. Risk of electric shock.

Safety Information

Read all safety instructions before use. Keep away from children. Do not use outdoors or in damp locations. Do not cover the lamp or place flammable materials near the light head.

Care & Cleaning

Unplug the lamp before cleaning. Use a soft, dry or slightly damp cloth to wipe the base, arm, and light head. Do not use abrasive cleaners, solvents, or sprays.

CAUTION! Never immerse the lamp in water or other liquids. Ensure the lamp is completely dry before plugging it back in.

Warranty & Support

IKEA products are covered by limited warranties. For specific warranty terms for the SVALLET lamp, refer to the IKEA warranty brochure or visit www.ikea.com. This product is intended for indoor residential use only. For assistance, contact IKEA customer service at 1-888-888-4532 or visit your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / faulty outlet / switch off	Ensure plug is fully inserted; test outlet with another device; press On/Off switch.
Lamp flickers	Loose connection / end of LED life	Check plug and cord connections. If persistent, LED may be failing.
Gooseneck will not hold position	Wear and tear / over-extended	Gently bend back to a neutral position and try again. Avoid extreme bends.
Lamp is unstable	Base not attached properly / uneven surface	Ensure base is screwed on tightly. Place on a level, stable surface.
Light is too dim or wrong color	Product specification / nearing end of life	This is a fixed-output, cool white LED lamp. Dimming indicates potential failure.

Recycling: Dispose of this product according to local electronic waste regulations.

Service: For non-working products under warranty, return to IKEA with proof of purchase.