IKEA SUNDVIK 302.485.75 Crib instructions manual

The IKEA SUNDVIK 302.485.75 is a solid wood crib designed for safety, durability, and style. It features adjustable mattress heights, a sturdy construction, and a timeless Scandinavian design. This manual provides essential information for assembly, safety guidelines, use, maintenance, and troubleshooting to ensure a safe sleeping environment for your child.

1. Safety Information 2. Parts & Tools Included 3. Assembly Instructions 4. Mattress Height Adjustment 5. Specifications 6. Proper Use & Care 7. Converting to Toddler Bed 8. Cleaning & Maintenance 9. Warranty Information 10. Troubleshooting

Safety Information

Read all instructions before assembly and use. Key safety components: Slat spacing, mattress fit, hardware tightness, and proper placement.

Safety Feature	Description
Slat spacing	Meets safety standards (less than 2 3/8 inches apart) to prevent entrapment
Mattress fit	Must be firm and fit snugly with no gaps larger than two fingers
Hardware	All bolts, screws, and fasteners must be tightened securely
Stability	Crib must not wobble; ensure all parts are locked in place
Placement	Keep away from windows, blinds, cords, and heaters
Drop-side warning	This crib does NOT have a drop-side; side is fixed for safety
Age/weight limit	For children up to 35 inches tall or able to climb out
Toys & pillows	Remove soft bedding, pillows, and stuffed toys to reduce SIDS risk
Assembly	Assemble on a soft surface to avoid scratching parts
Regular checks	Inspect crib monthly for loose hardware or damage

Parts & Tools Included

Unpack and verify all parts before starting assembly.

Side rails (2 pieces)
Headboard and footboard
Crib base (spring mattress support)
Mattress support brackets and screws
Wooden slats (if applicable)
All necessary bolts, screws, and washers
Allen key (included)

WARNING! Do not substitute hardware; use only parts provided. Missing parts? Contact IKEA customer service.

Assembly Instructions

Follow steps in order; allow 45-60 minutes for assembly.

Prepare workspace: Clear area, lay out all parts, use soft surface.
Attach headboard to side rails: Align pre-drilled holes, insert bolts hand-tight.
Attach footboard to opposite side rails: Repeat step 2.
Install mattress support brackets: Fix brackets to inside of crib at desired height.
Insert crib base/spring frame: Place onto brackets, ensure it is secure and level.
Final tightening: Use Allen key to tighten all bolts firmly; check for stability.
Install casters (if included): Snap into pre-drilled holes at base of legs.

CAUTION! Do not overtighten hardware. Ensure crib does not rock or wobble.

Mattress Height Adjustment

Three height settings for safety as child grows.

Highest position: For newborns and infants (easiest access).
Middle position: When child begins to sit up.
Lowest position: When child begins to stand (to prevent climbing out).

To adjust: Remove mattress, loosen mattress support brackets, reposition to desired set of holes, retighten brackets securely, replace mattress.

Tip: Adjust to lowest position before child reaches 35 inches in height or shows ability to pull up.

Specifications

Model: SUNDVIK 302.485.75
Material: Solid wood (pine, birch, or beech depending on finish)
Finish: Stain and lacquer (non-toxic)
Dimensions (assembled): Approx. 53" L x 29.5" W x 42" H
Inner dimensions (mattress): Standard crib mattress size (approx. 52" x 27.5")
Weight capacity: Up to child weight limit (typically 50 lbs)
Adjustable heights: 3 mattress levels
Convertible: Can convert to toddler bed (conversion kit may be sold separately)
Slat spacing: Complies with CPSC standards (< 2 3/8")
Country of origin: Designed and quality-tested by IKEA

Proper Use & Care

Use crib only as intended. Front Panel: Fixed side. Mattress: Use only firm, well-fitting crib mattress.

Daily checks: Ensure mattress is at correct height, hardware is tight, no loose or broken parts. Environment: Place crib in room with stable temperature, away from direct sunlight and drafts. Bedding: Use fitted crib sheets only; avoid blankets, bumpers, and pillows for infants.

Converting to Toddler Bed

Convert when child reaches 35 inches tall or can climb out.

Remove one side rail (usually the front).
Install toddler bed guardrail (sold separately) to prevent rolling out.
Ensure mattress is at lowest setting.
Check stability of remaining structure.

Tip: Use IKEA SUNDVIK conversion kit for best fit and safety.

Cleaning & Maintenance

Unplug? Not applicable. Use damp cloth with mild soap; dry immediately.

CAUTION! Do not use abrasive cleaners, solvents, or ammonia. Avoid excessive water. Check hardware monthly; tighten if loose.

Warranty Information

IKEA limited warranty: Covers material and manufacturing defects. Warranty period varies by country; check local IKEA store or website. Proof of purchase required. For support, visit www.ikea.com or contact your local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Crib wobbles	Uneven floor/loose hardware	Check all bolts are tight; place on level surface; adjust casters if present.
Mattress doesn't fit snugly	Wrong mattress size	Use standard crib mattress (approx. 52" x 27.5"); gaps should be less than two fingers.
Hardware won't tighten	Cross-threaded or wrong part	Disassemble step, realign holes, hand-tighten first; verify part numbers.
Side rail seems loose	Brackets not fully engaged	Ensure mattress support brackets are fully seated in slots; retighten bolts.
Wood cracks or splinters	Damage during assembly/use	Discontinue use; contact IKEA for replacement part or advice.

Recall Information: Check www.ikea.com or CPSC.gov for any safety notices.

Service: Contact IKEA customer service at 1-800-434-4532 (US) or visit www.ikea.com.