IKEA SUNDVIK 102.016.73 Table instructions manual

The IKEA SUNDVIK 102.016.73 is a solid wood table designed for durability and everyday use. It features a clean Scandinavian design, sturdy construction, and requires user assembly. Below are key sections covering safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Care & Maintenance 5. Product Specifications 6. Warranty & Support 7. Troubleshooting

Parts & Hardware

Before assembly, verify all parts are included. Check against the parts list below.

Part NameQuantityDescription
Tabletop1Solid wood panel, main surface
Table Legs4Tapered solid wood legs
Metal Corner Brackets4For securing legs to tabletop
Screws (short)16For attaching brackets to legs
Screws (long)8For securing brackets to tabletop
Allen Key1Tool for tightening screws
Protective Felt Pads4For leg bottoms to protect floors

Safety Information

Read all instructions before assembly. Ensure a safe working environment.

  1. Assemble on a soft, clean surface to avoid scratches.
  2. Keep small hardware away from children and pets.
  3. Use only the provided tools; do not overtighten screws.
  4. Check stability after assembly before use.

WARNING! Table is heavy; lift with care using two people. Ensure all connections are tight to prevent tipping.

Assembly Instructions

Follow steps in order. Estimated assembly time: 30-45 minutes.

  1. Prepare: Lay tabletop upside down on a padded surface.
  2. Attach Brackets: Position a metal corner bracket at each corner of the tabletop underside, aligning with pre-drilled holes.
  3. Secure Brackets: Using the long screws and Allen key, loosely attach each bracket to the tabletop (do not fully tighten yet).
  4. Attach Legs: Insert a table leg into each bracket. Align holes in leg with bracket.
  5. Secure Legs: Using the short screws, tighten each leg firmly into the bracket.
  6. Final Tightening: Return to the long screws securing the brackets to the tabletop and tighten fully.
  7. Add Pads: Peel backing from felt pads and apply one to the bottom of each leg.
  8. Upright: Carefully turn the table right-side up with assistance.

Tip: Do not fully tighten any screws until all legs are positioned, to allow for alignment adjustments.

Care & Maintenance

CAUTION! Never drag the table across the floor. Lift to move it.

Product Specifications

Warranty & Support

IKEA Limited Warranty applies. Refer to the IKEA warranty booklet included with purchase or available at IKEA stores.

  1. Warranty Period: Varies by region. Typically 10 years for structural integrity under normal domestic use.
  2. Coverage: Covers manufacturing defects in materials and workmanship.
  3. Not Covered: Damage from incorrect assembly, accidents, misuse, or improper care.
  4. Support: For missing parts or assembly help, contact your local IKEA store or visit www.ikea.com.

Troubleshooting

IssuePossible CauseSolution
Table wobblesUneven floor; loose screws; legs not alignedCheck floor level. Tighten all screws. Adjust leg alignment before final tightening.
Screw won't tightenCross-threaded; wrong screw usedBack screw out completely and restart threading. Verify screw type from parts list.
Leg doesn't fit bracketBracket misaligned; debris in holeLoosen bracket screws to reposition. Ensure hole is clear.
Surface stainLiquid spill or heat markClean immediately with damp cloth. For stubborn marks, use a mild wood cleaner recommended for finished wood.
Missing partPackaging errorContact IKEA customer service with article number (102.016.73) for replacement.

Reassembly: If moving, disassemble in reverse order and keep all hardware together.

Contact: IKEA Customer Support at 1-800-434-4532 or your local IKEA store.

IKEA SUNDVIK 102.016.73 Table instructions manual © - All Rights Reserved 2025