IKEA STUBBARP 091.397.24 Leg instructions manual

The IKEA STUBBARP 091.397.24 Leg is a furniture component designed for assembly with compatible IKEA tables or surfaces. This manual provides essential information for safe handling, identification, step-by-step assembly instructions, care guidelines, and troubleshooting. Ensure you have all parts and tools before beginning.

1. Parts Identification 2. Tools Required 3. Safety Instructions 4. Step-by-Step Assembly 5. Attachment to Table Surface 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Parts Identification

Key components included in the package.

Part Name	Description	Quantity
Leg (STUBBARP)	Main leg structure, metal/wood composite	4
Mounting Plate	Metal bracket for surface attachment	4
Assembly Screws	Wood screws for securing leg to plate	16
Surface Mounting Screws	Screws for attaching plate to table	16
Plastic Caps	Decorative caps to cover screw heads	16
Felt Pads	Protective pads for floor contact	4

Tools Required

Tools not included; prepare before assembly.

Phillips screwdriver (size #2)
Hex key (Allen wrench) - 4mm (if specified for your model)
Soft mallet (optional, for tapping parts into place)
Measuring tape
Pencil for marking

NOTE: Using incorrect tools may damage parts or void warranty.

Safety Instructions

Read all instructions before assembly.

Work Area: Use a clean, flat, stable surface with adequate lighting.
Lifting: Legs are heavy; lift with care using proper technique.
Children & Pets: Keep away from assembly area to prevent injury or part loss.
Hardware: Keep small parts away from children to avoid choking hazard.
Inspect: Check all parts for damage before assembly. Do not use damaged components.

WARNING! Ensure the final assembled furniture is stable on a level floor before use.

Step-by-Step Assembly

Assemble each leg individually before attaching to the table surface.

Attach Mounting Plate to Leg: Align the holes on the plate with the pre-drilled holes on the top of the leg.
Secure with Screws: Insert and tighten the four assembly screws (per leg) using a Phillips screwdriver. Do not overtighten.
Attach Felt Pad: Peel the backing from the felt pad and press firmly onto the bottom of the leg.
Repeat: Complete steps 1-3 for all four legs.

Tip: Lay a soft cloth under the leg during assembly to prevent scratching.

Attachment to Table Surface

Positioning and securing the legs to your table top.

Position the Table Top: Place the table top upside down on a protected, flat surface.
Mark Leg Positions: Measure and mark the positions for each leg according to your table's design. Typically, legs are placed near each corner.
Align and Secure: Position a leg assembly so the mounting plate aligns with your marks. Secure it to the table top using the provided surface mounting screws.
Check Stability: Tighten all screws securely. Attach all legs in the same manner.
Apply Caps: Press the plastic caps into the screw heads on the mounting plate for a finished look.
Final Check: Carefully turn the table upright. Check for stability on the floor. Gently rock the table to ensure it does not wobble.

CAUTION! Do not overtighten screws into the table surface, as this may strip the material.

Care & Maintenance

Proper care ensures longevity.

Cleaning: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or steel wool.
Protection: Use coasters under glasses and hot pads under dishes to prevent surface damage to the table top.
Inspection: Periodically check that all screws are tight. Re-tighten if necessary.
Moving: Lift the table; do not drag it across the floor to prevent damage to legs and floor.

NOTE: Felt pads may wear over time and can be replaced with standard adhesive felt pads.

Specifications

Product Name: STUBBARP Leg
Article Number: 091.397.24
Material: Steel/particleboard, Plastic caps, Felt
Finish: Black-brown (or as per packaging)
Dimensions (approx. per leg): Height: 70 cm, Width: 5 cm, Depth: 5 cm
Max Load Capacity (per leg): Refer to your main table product manual. Ensure total table load is distributed evenly.
Compatibility: Designed for use with specific IKEA table tops. Check compatibility before purchase.

Troubleshooting

Issue	Possible Cause	Solution
Table wobbles	Floor uneven, legs not level, screws loose	Place table on level floor. Check leg attachment and tighten all screws. Adjust felt pads if necessary.
Screw won't tighten	Stripped hole, misaligned parts	Disassemble and check for damage. Ensure parts are aligned correctly before screwing. Do not force.
Leg feels unstable	Mounting plate not flush, missing screws	Ensure the mounting plate is seated flat against the leg and table surface. Install all required screws.
Scratches on floor	Felt pads missing or worn	Attach or replace the felt pads on the bottom of each leg.
Parts don't fit	Wrong model or incorrect assembly step	Verify article number. Review assembly steps. Ensure you have the correct parts for your table top.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or your local store for details.

Missing Parts? Contact your nearest IKEA store or visit the IKEA website for spare parts.

Assembly Help: Visit the IKEA website and search for the product name or article number to find digital assembly guides and videos.

Customer Service: For further assistance, contact IKEA customer support at the number listed on your receipt or at www.ikea.com.