IKEA STRÅLA 305.632.58 Pendant Lamp instructions manual

The IKEA STRÅLA 305.632.58 is a pendant lamp designed for indoor use, featuring a classic spherical shade that provides diffused, glare-free light. It is intended for ceiling mounting over dining tables, kitchen islands, or in living areas. The lamp requires assembly and installation, which involves electrical wiring. Below are key sections for safety, parts included, step-by-step assembly, installation, usage, care, and troubleshooting.

1. Safety Instructions 2. Parts Included 3. Tools Required 4. Assembly Instructions 5. Installation & Wiring 6. Usage & Operation 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Safety Instructions

Read all instructions before assembly and installation. Failure to follow safety warnings can result in electric shock, fire, or injury.

WarningDescription
Electrical SafetyAlways turn off power at the circuit breaker before installation. Ensure wiring is done by a qualified person if you are unsure.
Lamp CompatibilityUse only with recommended bulb type and wattage (max 13W LED or 15W CFL). Do not exceed specified wattage.
Mounting SurfaceEnsure ceiling can support the lamp's weight. Use appropriate anchors for your ceiling type (concrete, wood, drywall).
Children & SafetyKeep packaging materials away from children. Do not let children play with the lamp or assembly parts.
Heat & VentilationAllow space for heat dissipation. Do not cover the lamp or place near heat sources.

Parts Included

Check that all parts are present before starting assembly. Contact IKEA if any parts are missing.

  1. Spherical Lamp Shade: 1 piece (white, opal glass/plastic).
  2. Ceiling Canopy: 1 piece (mounting plate).
  3. Suspension Cord: 1 set (adjustable length wire/cord with integrated cable).
  4. Socket Holder/Base: 1 piece (holds bulb socket).
  5. Hardware Pack: Contains screws, wall plugs, cable connectors (wire nuts).
  6. Instruction Manual: This document.

Note: Light bulb is not included.

Tools Required

You will need the following tools (not included):

Assembly Instructions

Assemble the lamp on a clean, soft surface to avoid scratching.

  1. Prepare the Shade: If the shade comes in two halves, gently twist or clip them together until secure.
  2. Attach Cord to Socket Holder: Thread the suspension cord through the canopy and then through the socket holder. Secure according to diagram.
  3. Wire the Socket: Connect the lamp cord wires to the socket terminals (usually screw-type). Follow color coding (brown/live to L, blue/neutral to N).
  4. Secure the Shade: Attach the assembled shade to the socket holder. This may involve twisting or using a locking ring.
  5. Adjust Cord Length: Decide on hanging height. Adjust the cord by loosening the canopy, pulling excess cord through, and re-tightening.

CAUTION! Do not fully tighten the ceiling canopy until installation is complete and height is finalized.

Installation & Wiring

WARNING: Turn off electricity at the main fuse box before proceeding.

  1. Mount the Canopy: Hold the mounting plate against the ceiling, mark screw holes. Drill pilot holes if needed. Secure the plate to the ceiling using provided screws and anchors.
  2. Connect Wires: Connect the lamp's wires (brown to live/black, blue to neutral/white, green/yellow to ground/green) to the corresponding house wires using wire nuts. Ensure connections are tight and no bare wire is exposed.
  3. Attach the Lamp: Place the lamp's canopy over the mounting plate and align the screws or locking mechanism. Secure it in place.
  4. Final Check: Tug gently on wires to ensure they are secure. Ensure the lamp is hanging straight.
  5. Restore Power: Turn the power back on at the circuit breaker.

Tip: If unsure about wiring, consult a licensed electrician.

Usage & Operation

Install a compatible bulb (E27 base, max 13W LED).

  1. Insert Bulb: Ensure lamp is off and cool. Screw in the bulb firmly but do not overtighten.
  2. Turn On: Use the wall switch connected to the lamp's circuit.
  3. Adjustment: The hanging height can be adjusted later by loosening the canopy, changing cord length, and re-tightening.

WARNING! Do not touch the bulb when the lamp is on or immediately after turning off, as it may be hot.

Care & Maintenance

Unplug/turn off power before cleaning.

  1. Cleaning Shade: Use a soft, dry or slightly damp cloth. Do not use abrasive cleaners or chemicals.
  2. Dusting: Regularly dust the shade and cord to maintain appearance.
  3. Bulb Replacement: Allow bulb to cool before replacing. Always replace with a bulb of equal or lower wattage than specified.

CAUTION! Never immerse the lamp or electrical parts in water.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Lamp does not turn onPower off, bulb faulty, loose connectionCheck circuit breaker/wall switch. Replace bulb. Ensure all wire connections are secure.
Lamp flickersLoose bulb, faulty bulb, loose wiringTighten bulb. Try a different bulb. Check wiring in canopy and socket.
Lamp hangs crookedCord not adjusted evenly, canopy looseAdjust cord length on both sides (if applicable). Tighten the canopy screws.
OverheatingBulb wattage too high, poor ventilationUse a bulb with wattage at or below the maximum specified. Ensure shade is not covered.
Buzzing soundIncompatible dimmer (if used), faulty ballast (in old CFLs)Use a non-dimmable bulb or a compatible LED dimmer. Replace bulb with a standard LED.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms for your country.

Recycling: Dispose of the product and its components according to local regulations for electrical waste.

For Support: Visit the IKEA website (www.ikea.com) for your country or contact your local IKEA store.

Spare Parts: Spare parts (cord sets, sockets, etc.) may be available for purchase.

IKEA STRÅLA 305.632.58 Pendant Lamp instructions manual © - All Rights Reserved 2025