IKEA STRÅLA 005.633.49 Table Lamp instructions manual

The IKEA STRÅLA 005.633.49 is a modern table lamp featuring a white plastic shade and a black metal base. It uses a maximum 7W LED bulb (E14 base, included) and is designed for indoor use. This manual provides essential information for safe assembly, installation, operation, maintenance, and troubleshooting of your new lamp.

1. Safety Information 2. Package Contents & Specifications 3. Assembly Instructions 4. Installation & First Use 5. Operation 6. Care & Cleaning 7. Troubleshooting 8. Disposal & Warranty

Safety Information

Please read all safety instructions before assembly and use to prevent injury or damage.

Symbol/Note	Meaning
WARNING!	Risk of electric shock. Disconnect from mains before assembly, cleaning, or bulb replacement.
CAUTION!	Lamp becomes warm during use. Do not touch the bulb or shade immediately after turning off.
Indoor Use Only	This lamp is designed for dry, indoor environments only.
Max Wattage	Use only LED bulbs with E14 base, max 7W. Do not exceed the recommended wattage.

Keep out of reach of children. Do not use if cord or plug is damaged.

Package Contents & Specifications

Unpack all parts and verify contents against this list.

Lamp Shade: 1x White plastic shade.
Lamp Base: 1x Black metal base with integrated switch.
Bulb: 1x 7W LED bulb (E14 base).
Cord Set: 1x Power cord with plug.
Hardware: All necessary screws/connectors (if applicable).
Instruction Manual: This document.

Specifications:
Model: STRÅLA
Article Number: 005.633.49
Power: Max 7W LED
Bulb Base: E14
Cord Length: Approx. 1.8m
Material: Shade: Plastic; Base: Metal
Intended Use: Indoor table/desk lamp

Assembly Instructions

Follow these steps for correct assembly. Ensure the lamp is unplugged during the entire process.

Prepare Workspace: Lay out all parts on a clean, soft surface to avoid scratches.
Attach Cord to Base: Thread the power cord through the designated channel in the metal base.
Secure Electrical Components: Connect the cord wires to the terminal block inside the base as per the color coding (usually Brown/Live, Blue/Neutral, Green-Yellow/Earth). Tighten screws securely. (Note: Some models may have pre-wired bases).
Assemble Base & Stem: If the lamp has a separate stem, screw it firmly into the base.
Install Bulb: Screw the provided 7W LED bulb (E14) into the socket. Do not overtighten.
Attach Shade: Place the white plastic shade over the bulb and secure it to the base or harp according to the design. It may click into place or require a finial to be screwed on.
Final Check: Ensure all parts are firmly attached and the cord is not pinched.

WARNING! Do not plug in the lamp until assembly is complete and you have verified all electrical connections are secure.

Installation & First Use

Choose Location: Place the lamp on a stable, level, and heat-resistant surface (e.g., table, desk, nightstand).
Plug In: Connect the power plug to a standard, easily accessible wall outlet.
Power On: Use the switch on the base or cord to turn the lamp on. The LED bulb should illuminate immediately.
Adjustment: If your model is adjustable, gently position the shade to direct light as needed.

CAUTION! Ensure the lamp is not placed near curtains, bedding, or other flammable materials. Allow space for ventilation.

Operation

Operating your STRÅLA lamp is simple.

On/Off: Use the integrated switch on the base or the in-line switch on the cord.
Light Output: The included LED bulb provides warm white light, ideal for ambient or task lighting.
Bulb Replacement: When the LED bulb reaches end of life, ensure the lamp is unplugged and completely cool. Unscrew the old bulb and replace it with an equivalent max 7W E14 LED bulb. Do not use halogen or incandescent bulbs exceeding the wattage.

Care & Cleaning

Proper care will maintain the lamp's appearance and functionality.

Unplug: Always disconnect the lamp from the power outlet before cleaning.
Cool Down: Allow the lamp to cool completely.
Cleaning Shade & Base: Wipe the plastic shade and metal base with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or scouring pads.
Cord Care: Wipe the cord with a dry cloth. Do not pull the cord to unplug it.

CAUTION! Never immerse the lamp, base, or cord in water or other liquids.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in; faulty outlet; bulb loose or dead; switch off.	Check plug and outlet; tighten or replace bulb; ensure switch is on.
Light flickers	Loose bulb; poor connection in socket.	Turn off, unplug, and reseat the bulb firmly.
Lamp becomes very hot	Using a bulb with wattage higher than 7W; enclosed fixture.	Immediately turn off and replace with correct 7W LED bulb. Ensure lamp is in an open area.
Plastic smell when first used	Normal for new electrical components.	This should dissipate after a few hours of use. Ensure proper ventilation.
Shade is unstable	Not properly secured during assembly.	Unplug lamp, check and re-secure the shade attachment.

Disposal & Warranty

Disposal: This product must not be disposed of with household waste. At the end of its life, hand it over to an applicable collection point for the recycling of electrical and electronic equipment. Contact your local authority for details. The LED bulb contains electronic components and should be recycled separately.

Warranty: IKEA products are covered by a commercial warranty. For warranty terms and service, please contact IKEA customer support or visit the IKEA website with your article number (005.633.49) and proof of purchase.

Support: For further assistance, visit www.ikea.com or contact your local IKEA store.