IKEA STRÅLA 005.629.48 Table Lamp instructions manual

The IKEA STRÅLA 005.629.48 is a modern table lamp featuring a sleek metal shade, adjustable arm for flexible positioning, and an integrated LED light source. It includes an in-line switch on the power cord, requires assembly, and operates on standard household voltage. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Positioning and Use 7. Replacing the Light Source 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Metal shade, adjustable arm, stable base, integrated non-replaceable LED module, power cord with in-line switch.

Feature	Description
Shade	Metal construction, directs light downward
Arm	Adjustable for height and angle positioning
Base	Weighted for stability
Light Source	Integrated LED module (non-replaceable)
Power Cord	With in-line ON/OFF switch
Plug	Standard two-pin plug (region specific)
Assembly	Required - tools not included
Finish	Black/White metallic (as per model)

Assembly Instructions

Unpack all parts and check contents against the parts list. Ensure you have a clean, flat surface.

Attach the base: Insert the lower section of the lamp stem into the base and secure with the provided screw.
Attach the arm: Connect the adjustable arm to the top of the stem using the locking mechanism. Tighten the adjustment knob.
Attach the shade: Slide the metal shade onto the arm's fitting and secure it by tightening the small set screw.
Route the cord: Guide the power cord along the arm and stem as shown in the diagram, using any clips if provided.

WARNING! Do not plug in the lamp during assembly. Ensure all connections are tight to prevent instability.

First-Time Setup

After assembly, place the lamp on a stable, level surface.

Positioning: Place the lamp on a table or desk where it will not be knocked over.
Adjust the arm: Move the arm to the desired height and angle for optimal lighting.
Plug in: Connect the plug to a standard wall outlet.
Power on: Use the in-line switch on the cord to turn the lamp ON.

CAUTION! Ensure the lamp is not placed near flammable materials or where the cord can be a tripping hazard.

Specifications

Model: STRÅLA 005.629.48
Type: Table Lamp
Light Source: Integrated LED
Luminous Flux: 300 lumens (approx.)
Color Temperature: 2700K (Warm White)
Power Consumption: 4W
Input Voltage: 100-240V AC, 50/60Hz
Dimensions (H): Approx. 40 cm
Material: Metal shade and base, plastic adjustment parts
Weight: 1.2 kg

Controls and Operation

The lamp is operated solely via the in-line switch on the power cord.

Switch: Slide the switch to the "I" position to turn the lamp ON. Slide to the "O" position to turn OFF.

Adjustment: The arm can be adjusted by loosening the adjustment knob, positioning the arm, and re-tightening the knob firmly.

Note: There is no dimming function. The integrated LED is designed for long-life operation.

Positioning and Use

For optimal performance and safety, follow these guidelines.

Use the lamp on a stable, horizontal surface.
Adjust the arm to direct light where needed, avoiding glare on screens.
Do not drape items (like cloth) over the lamp shade.
Ensure the power cord is not pinched or damaged.

Tip: Ideal for use as a task light for reading or as ambient lighting.

Replacing the Light Source

This lamp uses an integrated, non-replaceable LED module.

The LED light source is built into the lamp and is not designed to be replaced by the user.
If the light fails, the entire lamp unit must be replaced.
The LED has an estimated lifespan of 15,000 hours under normal use.

WARNING! Do not attempt to open or disassemble the lamp to access the LED module. This will void the warranty and can be dangerous.

Safety Information

Read all safety instructions before use.

This lamp is for indoor use only.
Do not use outdoors or in damp/wet locations.
Do not look directly into the LED light source.
Unplug the lamp before cleaning or when not in use for extended periods.
Keep out of reach of young children.
Do not use with dimmer switches unless specified as compatible (this model is not).

Care & Cleaning

Unplug the lamp and allow it to cool completely before cleaning.

Use a soft, dry or slightly damp cloth to wipe the metal shade and base.
Do not use abrasive cleaners, solvents, or scouring pads.
To clean the power cord, wipe with a dry cloth.

CAUTION! Never immerse the lamp, cord, or plug in water or other liquids.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided at the time of purchase or on the IKEA website. For product support, assembly help, or spare parts:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to the country-specific customer service number on your receipt.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Switch off / Faulty outlet	Ensure plug is firmly in outlet; check switch is ON; try a different outlet.
Lamp is unstable	Assembly not tight / Uneven surface	Check and tighten all screws and knobs. Place on a level surface.
Arm will not stay in position	Adjustment knob loose	Tighten the adjustment knob on the arm joint firmly.
Light flickers or is dim	Loose connection / End of LED life	Check plug and cord connections. If problem persists, the integrated LED may be failing.
Lamp gets warm	Normal operation	The metal parts may become warm during use. This is normal. Ensure vents are not blocked.

Disposal: Dispose of this product according to local electronic waste regulations. Do not dispose of with household waste.

Service: This product contains no user-serviceable parts. Do not attempt repairs.