IKEA STRANDÖN 705.227.65 Umbrella instructions manual

The IKEA STRANDÖN 705.227.65 is a freestanding outdoor umbrella designed for patios, decks, and gardens. It features a tilt mechanism for sun angle adjustment, a crank handle for easy opening and closing, a sturdy steel frame with powder-coated finish for weather resistance, and a durable polyester canopy. The umbrella base is sold separately. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Tilt Adjustment 7. Opening and Closing 8. Safety Features 9. Care & Maintenance 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Steel pole and ribs, Polyester canopy, Crank handle, Tilt mechanism, Push-button lock, Ventilation top.

Feature	Description
Steel frame	Powder-coated for rust resistance and durability
Polyester canopy	Water-resistant and UV-protected fabric
Crank handle	For smooth opening and closing of the canopy
Tilt mechanism	Allows adjustment of canopy angle for sun shade
Ventilation top	Wind vents to reduce uplift in breezy conditions
Push-button lock	Secures the tilt position
Separate base	Base is required for stability (sold separately)
Dimensions (open)	Approx. 9.8 ft (3 m) diameter, 7.9 ft (2.4 m) height
Weight	Approx. 33 lbs (15 kg)
Color options	Typically available in beige, grey, or dark grey

Assembly Instructions

Unpack all parts and check contents against included parts list. Assembly requires two people.

Attach the ribs: Connect the umbrella ribs to the hub on the top of the pole using provided pins or screws.
Install the canopy: Drape the canopy over the ribs, aligning the corners. Secure with Velcro straps or ties.
Insert the pole: Slide the assembled umbrella pole into the designated hole on your IKEA STRANDÖN base (not included). Ensure it is fully seated.
Secure the crank: Attach the crank handle to the designated socket on the pole and tighten.

WARNING! The umbrella is heavy; lift with care to avoid injury. Ensure the base is adequately weighted before use.

First-Time Setup

Place the umbrella in its intended location before final assembly.

Choose location: Select a flat, stable surface away from overhead obstacles.
Prepare the base: Fill the STRANDÖN base (sold separately) with sand or water as per its instructions for maximum stability.
Insert pole: Place the umbrella pole into the base sleeve. Ensure it is vertical and secure.
Test operation: Open and close the umbrella using the crank to ensure smooth operation before tilting.

CAUTION! Never use the umbrella without a properly weighted base. High winds can cause tipping.

Specifications

Product Name: STRANDÖN Umbrella.
Article Number: 705.227.65.
Type: Freestanding, round, tilt patio umbrella.
Frame Material: Steel, powder-coated.
Canopy Material: 100% polyester (water-resistant).
Mechanism: Crank open/close, manual tilt.
Diameter: 9.8 ft (3 m).
Pole Height: Approximately 7.9 ft (2.4 m).
Weight: Approximately 33 lbs (15 kg).
Base Required: Yes (sold separately, e.g., IKEA STRANDÖN base).

Controls and Operation

Primary controls are the crank handle and tilt mechanism.

Crank Handle: Turn clockwise to open the canopy, counter-clockwise to close. Operate slowly and smoothly.

Tilt Mechanism: Located just below the canopy. Press the tilt lock button to release, then gently push the canopy to the desired angle. Release the button to lock in place.

Ventilation Top: Fixed feature; no controls needed. Allows wind to pass through.

Push-button Lock: Secures the tilt position. Ensure it clicks into place after adjusting.

Tilt Adjustment

Allows you to block the sun as it moves.

Ensure the umbrella is fully open.
Locate the tilt lock button on the pole, just below the canopy.
Press and hold the button to release the tilt mechanism.
Gently push the canopy to the desired angle (multiple positions available).
Release the button to lock the tilt in place. You should hear a click.

Tip: Do not force the tilt if it resists. Ensure the lock is fully released first.

Opening and Closing

Always operate the crank handle smoothly.

Opening: Turn the crank handle clockwise. Continue until the canopy is fully open and taut. Do not over-crank.
Closing: Turn the crank handle counter-clockwise. Continue until the canopy is fully gathered around the pole.
For storage: Always close the umbrella and lock the tilt in the upright position before covering or moving.

WARNING! Keep fingers clear of moving parts (ribs, joints) during operation. Close the umbrella in high winds or when unattended.

Safety Features

Tilt lock: Prevents accidental tilting. Ventilation top: Reduces wind catch and potential uplift. Sturdy base requirement: Ensures stability.

Safety Instructions: Always use with a weighted base. Close and secure during strong winds, thunderstorms, or when unattended for long periods. Keep away from open flames and barbecues.

Care & Maintenance

Clean canopy with mild soap solution and soft brush. Rinse with water and air dry completely before closing. Wipe frame with damp cloth. Do not use abrasive cleaners.

Storage: For winter or long-term storage, close the umbrella, clean it, let it dry thoroughly, and use a protective cover. Store in a dry place.

CAUTION! Never close the canopy while wet, as this can cause mold and mildew. Do not use bleach or harsh chemicals.

Warranty Information

IKEA limited warranty applies. Refer to the IKEA warranty document included with purchase or available at IKEA stores. Warranty covers material and manufacturing defects under normal residential use. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Umbrella wobbles or tips	Base not heavy enough or uneven surface	Add more weight (sand/water) to base; ensure surface is flat and stable.
Crank is hard to turn	Ribs obstructed or mechanism needs lubrication	Check for fabric caught in ribs; apply silicone spray to moving parts if necessary.
Canopy does not open fully	Over-cranked on previous close or rib issue	Gently reverse crank slightly, then reopen. Check ribs for bends.
Tilt mechanism does not lock	Lock button damaged or misaligned	Inspect button and mechanism for debris or damage. Contact IKEA if faulty.
Water pooling on canopy	Normal with flat design; fabric sagging	Gently push up on center pole from below to drain water. Ensure canopy is taut when open.
Rust on frame	Finish damaged or long-term exposure	Clean area, dry thoroughly, and touch up with matching outdoor paint.

Service: For missing parts or assembly help, visit www.ikea.com or contact your local IKEA store.