IKEA STRANDMON 203.618.97 Wing Chair instructions manual

The IKEA STRANDMON 203.618.97 is a classic wing chair designed for comfort and style, featuring a high back with side wings, a supportive cushion, and a sturdy wooden frame. It requires assembly and comes with all necessary parts and tools. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Safety Information 2. Parts & Tools Included 3. Assembly Instructions 4. Care & Maintenance 5. Warranty & Support 6. Troubleshooting

Safety Information

Read all instructions before assembly. Ensure a clean, spacious work area.

Keep small parts away from children to avoid choking hazards.
Assemble on a soft surface to prevent scratches or damage to parts.
Use only the provided Allen key; do not overtighten screws.
Check all connections are secure before use.

WARNING! Chair is heavy; lift with care using two people. Do not stand or jump on the chair.

Parts & Tools Included

Verify all parts are present before starting assembly.

Part Number	Description	Quantity
100001	Chair back frame (left)	1
100002	Chair back frame (right)	1
100003	Seat base frame	1
100004	Front legs	2
100005	Back legs	2
100006	Armrests	2
100007	Wing panels	2
200001	Bolts (M8 x 40mm)	12
200002	Washers	12
200003	Allen key	1
300001	Seat cushion	1
300002	Back cushion	1

Assembly Instructions

Follow steps in order; do not skip any steps.

Attach legs: Place seat base frame upside down on soft surface. Insert front legs (100004) and back legs (100005) into pre-drilled holes. Secure each leg with 2 bolts (200001) and washers (200002) using the Allen key. Tighten firmly but do not strip threads.
Connect back frame: Align left back frame (100001) and right back frame (100002) to the seat base. Insert 4 bolts through the marked holes. Hand-tighten first, then secure with Allen key.
Attach armrests: Slide armrests (100006) onto the sides of the frame. Secure with 2 bolts per armrest from underneath.
Install wing panels: Position wing panels (100007) onto the back frame. Secure with remaining bolts from the inside.
Final check: Ensure all bolts are tight and frame is stable. Turn chair upright.
Add cushions: Place seat cushion (300001) and back cushion (300002) into position.

CAUTION! Do not use power tools; overtightening can damage the wood.

Care & Maintenance

Fabric: Vacuum regularly. Spot clean with mild detergent and damp cloth; do not soak.
Frame: Wipe with dry cloth. Avoid harsh chemicals.
Cushions: Fluff regularly to maintain shape. Covers are removable for washing (check label).
Legs: Protect floor with felt pads (not included).

Tip: Rotate cushions periodically for even wear.

Warranty & Support

IKEA limited warranty covers manufacturing defects for 10 years from date of purchase. Keep receipt.

Contact: For missing parts or assembly help, visit IKEA store or call 1-888-888-4532. Online: www.ikea.com.

Troubleshooting

Issue	Possible Cause	Solution
Chair wobbles	Legs not tight or uneven floor	Tighten all bolts; check floor level; adjust leg glides if available.
Bolts won't tighten	Threads misaligned	Loosen, realign parts, and retighten gently.
Cushion slips	Not properly seated	Remove and reposition cushion; ensure it fits snugly.
Fabric stain	Spills or dirt	Blot immediately; clean per care instructions.
Missing part	Packaging error	Contact IKEA with part number for replacement.

Note: Do not modify chair; voids warranty.