IKEA STRÅLA 605.633.27 Table Lamp instructions manual

The IKEA STRÅLA 605.633.27 is a modern table lamp designed for ambient lighting. It features a clean, minimalist design, an energy-efficient LED light source, a touch-sensitive dimmer for adjustable brightness, and a stable base. Suitable for desks, bedside tables, or living rooms. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Instructions 4. Assembly Instructions 5. Operation & Controls 6. Specifications 7. Care & Cleaning 8. Warranty Information 9. Troubleshooting

Features at a Glance

Key components: LED light module, touch-sensitive dimmer control, fabric/plastic shade, weighted base, power cord with plug.

Feature	Description
Light Source	Integrated, non-replaceable LED
Dimmer Control	Touch-sensitive base for brightness adjustment
Shade Material	Fabric or plastic diffuser (model dependent)
Base	Weighted for stability
Power	Plug-in cord, 120V AC, 60Hz
Light Output	Warm white light, adjustable intensity
Dimensions	Approx. H: 12.6" (32 cm), Base Ø: 5.9" (15 cm)
Certifications	UL Listed, Energy Star compliant (if applicable)

Package Contents

Unpack and verify all parts before assembly.

Lamp base (weighted)
Lamp stem/column
Shade
Power cord with plug
Instruction manual (this sheet)
Hardware (if required, e.g., screws)

WARNING! Check for damage. Do not use if any part is broken or cord is frayed.

Safety Instructions

Read all instructions before assembly and use.

Use only with 120V AC, 60Hz power outlet.
Do not disassemble or modify the lamp.
Keep away from water, moisture, and heat sources.
Do not use with dimmer switches (unless specified).
Unplug before cleaning or when not in use for extended periods.
This lamp contains non-replaceable LED. Do not attempt to replace.
Keep out of reach of children.

CAUTION! Risk of electric shock if misused.

Assembly Instructions

Assemble on a clean, flat surface.

Attach stem to base: Align stem with base socket and twist clockwise until secure.
Attach shade: Place shade over stem and secure with provided ring or clip (if applicable). Ensure it sits evenly.
Connect power cord: Plug cord into port on base (if detachable) or ensure built-in cord is free.
Final check: Ensure all parts are firmly attached and lamp does not wobble.

Tip: Do not overtighten parts. Hand-tighten only.

Operation & Controls

Plug lamp into wall outlet. Touch the metal base or designated touch area to control.

Touch Control Sequence:

First touch: Turn ON at low brightness.
Second touch: Increase to medium brightness.
Third touch: Increase to high brightness.
Fourth touch: Turn OFF.

Note: Lamp remembers last brightness setting when turned off and on again via touch.

Specifications

Model: STRÅLA 605.633.27
Light Source: Integrated LED
Lifetime: Approx. 25,000 hours
Power Consumption: Max 7W (equivalent to 60W incandescent)
Color Temperature: 2700K (Warm White)
Brightness: Adjustable, up to 800 lumens
Input Voltage: 120V AC, 60Hz
Cord Length: 6 ft (1.8 m)
Materials: Base: Steel/plastic; Shade: Fabric or plastic

Care & Cleaning

Unplug lamp and allow to cool before cleaning.

Shade: Wipe with a dry, soft cloth. For fabric shades, use a vacuum brush attachment.
Base and stem: Wipe with a slightly damp cloth, then dry immediately.
Do NOT: Use abrasive cleaners, solvents, or immerse in water.

CAUTION! Never spray liquids directly onto the lamp.

Warranty Information

IKEA limited warranty. For details, refer to the IKEA warranty booklet included with purchase or visit www.ikea.com.

Support: For missing parts, assembly help, or returns, contact IKEA customer service at 1-888-888-4532 or visit your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Faulty outlet	Ensure plug is secure in working outlet. Try another outlet.
Touch control not working	Dirty surface / Power issue	Clean touch area with dry cloth. Unplug for 10 seconds, then replug.
Lamp flickers	Loose connection / Power surge	Check plug and cord connections. Plug into a different circuit.
Lamp is dim	Touch set to low brightness / End of life	Touch to cycle to higher brightness. If persistently dim, LED may be near end of life.
Lamp wobbles	Uneven surface / Loose assembly	Place on flat surface. Check and tighten stem and base connection.

Reset: Unplug for 1 minute, then plug back in to reset touch control memory.

Disposal: Dispose of according to local electronic waste regulations. Do not dispose of with household trash.