IKEA STRÅLA 505.633.37 Table Lamp instructions manual

The IKEA STRÅLA 505.633.37 is a modern table lamp featuring a metal shade, adjustable arm, and an integrated LED light source. Designed for use on desks, bedside tables, or shelves, it provides focused task lighting with an energy-efficient, long-lasting LED bulb included. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Package Contents & Parts 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Operation & Controls 6. Light Adjustment 7. Bulb Replacement 8. Care & Cleaning 9. Warranty & Support 10. Troubleshooting

Package Contents & Parts

Before assembly, verify all parts are present and undamaged.

Part	Quantity	Description
Lamp base	1	Weighted metal base
Lamp arm	1	Adjustable metal arm with joints
Lamp shade	1	Metal shade with reflector
LED bulb	1	Integrated E14 socket LED (included)
Power cord with switch	1	1.8m cord with in-line ON/OFF switch
Assembly screws	3	Pre-attached or included in bag
Instruction manual	1	This document

Safety Information

Read all safety instructions before assembly and use.

For indoor use only. Keep away from water and moisture.
Use only with the included LED bulb or equivalent E14 LED bulb (max 7W).
Do not disassemble or modify the lamp. Risk of electric shock.
Ensure the lamp is placed on a stable, flat surface.
Unplug before cleaning or bulb replacement.

WARNING! To prevent fire or shock hazard, do not use with dimmer switches unless specified. Do not cover the lamp shade during operation.

Assembly Instructions

Estimated assembly time: 10-15 minutes. Tools required: None.

Place the weighted base on a flat surface.
Attach the adjustable arm to the base by aligning the screw holes. Tighten the pre-attached screw securely by hand (no tools needed).
Connect the power cord wires to the terminals inside the base (if not pre-connected). Follow color coding: brown to L, blue to N, green/yellow to ⏚.
Attach the lamp shade to the top of the arm. Align the notch and twist clockwise until it locks.
Insert the included LED bulb into the E14 socket inside the shade. Do not overtighten.
Route the power cord neatly along the arm and out the back of the base.

CAUTION! Ensure all connections are secure. Do not force parts.

Specifications

Model: STRÅLA 505.633.37
Dimensions (assembled): Height: 45 cm, Width: 25 cm, Depth: 20 cm
Material: Base/Arm/Shade: Steel, powder-coated
Light Source: Integrated LED, 470 lumens, 4000K (cool white)
Socket: E14
Power Consumption: 6W (equivalent to 40W incandescent)
Input Voltage: 100-240V AC, 50/60Hz
Cord Length: 1.8 meters
Weight: 1.8 kg

Operation & Controls

Power ON/OFF: Use the in-line switch on the power cord. No separate dimmer function.

Adjustment: The lamp arm features two flexible joints. Gently bend the arm to direct light where needed. The shade can be tilted slightly for fine adjustment.

Energy Saving: The integrated LED has an estimated lifespan of 25,000 hours. Turns on instantly with full brightness.

Light Adjustment

For optimal task lighting:

Position the lamp base so it is stable and the cord is not a tripping hazard.
Bend the arm joints to raise or lower the light head.
Tilt the shade to avoid glare on screens or reflective surfaces.
The light should illuminate your work area without shining directly into your eyes.

Tip: For reading, position the shade so the bottom edge is at eye level.

Bulb Replacement

The included LED is non-replaceable by user. If light fails, the entire lamp head may need service.

If using a replaceable E14 bulb:

Unplug the lamp and allow to cool.
Gently unscrew the old bulb counterclockwise.
Screw in a new E14 LED bulb (max 7W) clockwise. Do not overtighten.
Plug in and test.

WARNING! Use only LED bulbs. Incandescent or halogen bulbs may overheat.

Care & Cleaning

Unplug lamp before cleaning.

Use a soft, dry cloth to dust the shade and body.
For stubborn marks, use a slightly damp cloth. Dry immediately.
Do not use abrasive cleaners, solvents, or chemicals.

CAUTION! Never immerse the lamp in water. Do not spray cleaners directly onto the surface.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or at IKEA stores.

For spare parts, assembly help, or product support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to product number 505.633.37.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / faulty switch	Check power outlet; ensure cord is plugged in; toggle in-line switch. Try a different outlet.
Light flickers or is dim	Loose bulb / poor connection	Unplug, check and reseat the LED bulb. Ensure it is screwed in properly.
Lamp is unstable	Base not flat / arm loose	Place on a level surface. Check and tighten the arm-to-base connection screw.
Arm is stiff or hard to move	Joints may be new	Gently work the joints back and forth a few times to loosen. Do not force.
Overheating	Wrong bulb type / covered shade	Use only recommended LED bulb. Ensure shade vents are not blocked.

Recycling: Dispose of according to local electronic waste regulations.

Service: For non-electrical issues (loose joints, parts), contact IKEA for spare parts.