IKEA STRÅLA 305.628.62 Table Lamp instructions manual

The IKEA STRÅLA 305.628.62 is a modern table lamp designed for ambient lighting. It features a clean, minimalist design, an integrated LED light source, a touch-sensitive dimmer for adjustable brightness, and a stable base. The lamp is designed for indoor use on stable, flat surfaces. Below are key sections for safety, assembly, features, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Light Source Information 7. Safety Precautions 8. Care & Cleaning 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: Lamp shade, base, integrated LED module, touch-sensitive dimmer control, and power cord.

Feature	Description
Lamp Shade	Diffuser for soft, even light distribution
Base	Weighted for stability
Integrated LED	Energy-efficient, long-life light source
Touch Dimmer	Touch the base or a designated area to turn on/off and adjust brightness levels
Power Cord	For connection to standard wall outlet
Design	Modern, minimalist aesthetic suitable for various interiors

Assembly Instructions

Unpack all parts and check contents against the included parts list.

Prepare the Base: Place the weighted base on a clean, flat surface.
Attach the Stem/Neck: If applicable, screw the stem into the pre-threaded hole on the base until hand-tight.
Attach the Lamp Shade: Align the shade with the top of the stem or socket. Gently push or twist (as per design) until it clicks or sits securely in place. Do not force.
Final Check: Ensure all connections are secure and the lamp stands upright without wobbling.

WARNING! Do not assemble near water. Ensure the lamp is unplugged during assembly.

First-Time Setup

After assembly, the lamp is ready for use.

Positioning: Place the lamp on a stable, level surface such as a bedside table, desk, or shelf.
Power Connection: Plug the power cord into a standard 120V AC (or local equivalent) wall outlet.
Operation: Use the touch-sensitive control to turn on the lamp. Refer to the Controls section for details.

CAUTION! Keep the lamp away from flammable materials, curtains, and bedding. Ensure the cord is not pinched or damaged.

Specifications

Product Name: STRÅLA
Article Number: 305.628.62
Light Source: Integrated, non-replaceable LED.
Light Output: [e.g., 400 lumens] - Warm white light.
Dimmable: Yes, via touch control (multiple brightness levels).
Power Consumption: [e.g., 5W]
Input Voltage: 120V AC, 60Hz (or suitable for your region).
Cord Length: Approximately [e.g., 5.9 ft / 1.8 m].
Materials: Base: Steel/plastic; Shade: Polycarbonate/other plastic.
Dimensions: Height: [e.g., 15.75"] Width: [e.g., 7.87"]

Controls and Operation

The lamp is controlled via a touch-sensitive area, typically on the base or stem.

Operation:

Turn On/Off: A single, brief touch toggles the lamp on or off.
Adjust Brightness: While the lamp is on, touch and hold the control area. The light will cycle through brightness levels (e.g., Low -> Medium -> High -> Low). Release at your desired level.
Memory Function: The lamp may remember the last brightness setting used when turned off and on again.

Note: Ensure your finger is dry and clean for reliable touch control.

Light Source Information

This lamp uses an integrated LED module.

Life Expectancy: Approximately 25,000 hours under normal use.
Non-Replaceable: The LED light source is built into the product and cannot be replaced by the user. If the light fails, the entire lamp unit will need to be replaced.
Color Temperature: Warm white (approx. 2700K), creating a cozy atmosphere.

WARNING! Do not attempt to disassemble the lamp to access the LED. This will void the warranty and can be dangerous.

Safety Precautions

For indoor use only.
Use only with the provided power adapter/cord. Do not modify the plug.
Disconnect from power before cleaning or when not in use for extended periods.
Do not use the lamp if the cord or plug is damaged.
Do not cover the lamp or place objects on it while in operation, as this may cause overheating.
Keep out of reach of young children.
This lamp is not a toy.

Care & Cleaning

Unplug the lamp and allow it to cool completely before cleaning.

Exterior Surfaces: Wipe with a soft, dry or slightly damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays.
Lamp Shade: Dust gently with a soft brush or microfiber cloth. For plastic shades, a damp cloth can be used, followed by drying with a soft cloth.

CAUTION! Never immerse the lamp, cord, or plug in water or other liquids.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with the product or available at IKEA stores for details on coverage period and conditions.

For customer service, assembly help, spare parts, or more information:

Visit: www.IKEA.com
Contact your local IKEA store.
Refer to the country-specific contact information on the IKEA website.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / Power outage / Faulty outlet	Ensure plug is firmly in outlet. Try a different outlet. Check home circuit breaker.
Touch control is unresponsive	Wet/dirty fingers / Control area dirty / Internal fault	Dry your hands. Clean the touch area with a dry cloth. Unplug for 1 minute, then retry.
Light flickers or is dim	Loose connection / End of LED life	Check plug and cord connections. If problem persists, the integrated LED may be failing.
Lamp gets warm	Normal operation	Some warmth is normal. Ensure vents (if any) are not blocked. If excessively hot, unplug and contact support.
Lamp wobbles	Uneven surface / Loose assembly	Place on a level surface. Check that all parts (base, stem, shade) are securely attached.

Disposal: At end of life, dispose of this electronic product according to local regulations. Do not dispose with household waste.