IKEA STORJORM 994.900.85 Mirror instructions manual

The IKEA STORJORM 994.900.85 is a wall-mounted mirror designed for bathroom or hallway use, featuring a rectangular shape with a stainless steel or chrome-finished frame. It includes mounting hardware (brackets, screws, wall plugs), requires assembly, and is intended for indoor use only. Below are key sections for safety, parts list, assembly, installation, care, and warranty information.

Parts Included

Check that all parts are present before starting assembly.

Tools Needed

Tools not included that you will need for assembly and installation.

• Phillips screwdriver
• Drill with appropriate drill bit for your wall type (masonry/wood)
• Level (spirit level)
• Pencil for marking
• Tape measure
• Soft cloth or gloves (for handling mirror)

Safety Instructions

WARNING! Serious injury or damage can occur if not followed.

1. Glass handling: The mirror is heavy and fragile. Always handle with care. Use two people for lifting and positioning. Wear gloves to protect hands from sharp edges.
2. Mounting surface: Ensure the wall is solid and can support the mirror's weight. Do not mount on hollow doors, plasterboard without proper anchors, or unstable surfaces.
3. Children safety: Keep children away during assembly. Ensure mirror is securely mounted out of reach if in a child's room.
4. Power tools: Use caution when drilling. Check for hidden wires or pipes before drilling into walls.
5. Indoor use only: This mirror is not suitable for outdoor use or in areas with constant high humidity (e.g., steam rooms).

Assembly Steps

Assemble the frame on a soft, flat surface (e.g., carpet, blanket) to prevent scratching.

1. Prepare parts: Lay out all frame pieces (B, C, D, E) and screws (G).
2. Attach side frames: Connect the left frame (B) to the top frame (D) using two screws. Repeat for the right frame (C). Do not fully tighten yet.
3. Add bottom frame: Connect the bottom frame (E) to both side frames using the remaining screws. Ensure all corners are aligned.
4. Insert mirror: Carefully place the mirror glass (A) into the assembled frame. Ensure it sits evenly within the frame channel.
5. Final tightening: Once the mirror is seated correctly, fully tighten all frame screws evenly using the provided Allen key. Do not overtighten.
6. Attach mounting brackets: Screw the two wall mounting brackets (F) to the back of the assembled frame at the marked positions.

CAUTION! Do not apply excessive pressure on the mirror surface during assembly.

Wall Mounting Installation

This is a two-person job. Ensure the wall is suitable.

1. Choose location: Select a wall area free of obstructions. Consider height for intended use.
2. Mark bracket positions: Hold the assembled mirror against the wall at the desired height. Use a level to ensure it is perfectly horizontal. Mark the screw holes for the brackets on the wall with a pencil.
3. Drill holes: Using a drill and appropriate bit, drill holes at the marked positions. Insert the provided wall plugs (H).
4. Mount brackets to wall: Align the brackets with the holes and secure them to the wall using the provided screws. Ensure they are firmly attached and level.
5. Hang the mirror: With help, lift the mirror and hook the brackets on the back onto the wall-mounted brackets. Gently lower into place.
6. Secure and check: Ensure the mirror is securely seated on the brackets and does not wobble. Give it a gentle test.

Tip: For plasterboard walls, use suitable hollow wall anchors (not included) that can support the mirror's weight.

Care & Maintenance

Proper care will extend the life and clarity of your mirror.

• Cleaning: Use a soft, lint-free cloth. For smudges, dampen the cloth with a mild glass cleaner or a solution of vinegar and water. Spray cleaner onto the cloth, not directly onto the mirror.
• Avoid: Do not use abrasive cleaners, scouring pads, ammonia-based products, or solvents. They can damage the reflective coating and frame finish.
• Frame cleaning: Wipe the metal frame with a dry or slightly damp cloth. Dry immediately to prevent water spots.
• Humidity: In bathrooms, ensure good ventilation to reduce moisture buildup on the mirror surface.

CAUTION! Never use sharp objects to remove stains from the mirror.

Specifications

• Model: STORJORM
• Article Number: 994.900.85
• Dimensions (W x H): Approximately 60 cm x 80 cm (23.6" x 31.5")
• Frame Material: Stainless steel / Chrome-plated
• Mirror Type: Clear float glass with silver backing
• Weight: Approximately 8 kg (17.6 lbs)
• Mounting: Wall-mounted, horizontal orientation
• Intended Use: Indoor residential use (bathroom, hallway, bedroom)

Troubleshooting

Warranty & Support

IKEA limited warranty applies. See IKEA terms and conditions for details.

• Warranty Period: Refer to the IKEA warranty leaflet included in the packaging or available in-store.
• Support: For missing parts, assembly questions, or warranty claims:
  • Visit the IKEA store where you made the purchase.
  • Contact IKEA Customer Support: Visit www.ikea.com for your local country's contact details.
  • Have your article number (994.900.85) and receipt ready.
• Recycling: Dispose of packaging materials responsibly. For mirror disposal, check local regulations for glass recycling.

Note: This manual is a guide. Always prioritize safety and follow any specific instructions provided on the IKEA packaging.