IKEA STORJORM 593.366.75 Door Light instructions manual

The IKEA STORJORM 593.366.75 is a battery-operated LED door light designed for easy installation on interior doors. It features motion sensor activation, energy-efficient LED lighting, adhesive or screw mounting options, adjustable light duration, and a low battery indicator. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operation Modes 8. Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: LED light unit, motion sensor, battery compartment, mounting hardware, adhesive strips.

Feature	Description
Motion sensor	Automatically turns light on when movement is detected
LED light source	Energy-efficient, long-lasting white light
Battery compartment	Holds 3 x AA batteries (not included)
Mounting options	Adhesive strips or screws for flexible installation
Light duration adjustment	Adjustable time (15 sec to 5 min) light stays on
Low battery indicator	LED flashes when batteries need replacement
ON/OFF switch	Manual control for power
Test button	Checks sensor and light functionality
Light sensitivity adjustment	Adjusts motion detection range
Daylight sensor	Prevents activation in bright light conditions

Installation

Unpack and inspect contents. Choose suitable location on door frame.

Prepare surface: Clean door frame with alcohol wipe for adhesive mounting.
Choose mounting method: Use adhesive strips for tool-free installation or screws for permanent mounting.
Position unit: Place on door frame at recommended height (6-7 feet from floor).
Secure unit: Press firmly if using adhesive, or drill holes and use screws if needed.
Insert batteries: Open battery compartment, insert 3 x AA batteries observing polarity.

WARNING! Do not install near heat sources or in damp locations. Ensure door can open/close freely.

First-Time Setup

After installation, configure settings for optimal performance.

Turn ON/OFF switch to ON position.
Adjust light duration: Use dial to set desired time (15 sec to 5 min).
Adjust sensitivity: Set motion detection range (3-10 feet).
Test functionality: Press TEST button to verify light and sensor work.
Configure daylight sensor: Ensure unit doesn't activate in daylight if desired.

CAUTION! Keep away from children during installation. Use appropriate tools if drilling.

Specifications

Product Name: STORJORM Door Light
Article Number: 593.366.75
Light Source: LED, 3000K warm white
Luminous Flux: 15 lumens
Power Source: 3 x AA batteries (1.5V each)
Battery Life: Up to 1 year with normal use
Detection Range: Adjustable 3-10 feet
Detection Angle: 120 degrees
Light Duration: Adjustable 15 seconds to 5 minutes
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Dimensions: 2.4 x 1.6 x 0.8 inches (6 x 4 x 2 cm)
Weight: 3.5 oz (100 g) without batteries

Controls and Settings

Access controls via physical buttons and dials on unit.

Front Panel: ON/OFF switch, TEST button, sensitivity dial, duration dial.

Settings: Light duration (15 sec, 30 sec, 1 min, 3 min, 5 min). Sensitivity (Low, Medium, High). Daylight sensor (Auto mode). Battery compartment with polarity markings.

Connecting to Power

Battery installation and maintenance.

Turn OFF switch before battery replacement.
Open battery compartment using coin or screwdriver.
Insert 3 x AA batteries observing correct polarity (+/-).
Close compartment securely.
Turn ON switch to activate.

Tip: Use alkaline batteries for longest life. Remove batteries if not used for extended periods.

Operation Modes

Automatic and manual operation options.

Automatic mode: Motion sensor detects movement, turns light on for set duration.
Manual test: Press TEST button to activate light regardless of sensor.
Daylight mode: Unit remains off during daylight hours (if enabled).
Battery save mode: Reduces brightness when batteries are low.
Off mode: Switch to OFF position to disable completely.

WARNING! Do not cover sensor. Ensure detection path is clear of obstructions.

Maintenance

Regular cleaning and battery replacement.

Clean lens: Use soft, dry cloth to wipe LED lens and sensor window.
Check batteries: Replace when low battery indicator flashes.
Inspect mounting: Ensure adhesive or screws remain secure.
Test regularly: Press TEST button monthly to verify operation.

CAUTION! Do not use chemicals or abrasive cleaners. Do not immerse in water.

Safety Information

Important safety precautions for use and maintenance.

Keep away from children and pets during installation
Do not install in bathrooms or other damp locations
Use only recommended battery type (AA alkaline)
Do not modify or disassemble the unit
Keep away from heat sources and direct sunlight
Dispose of batteries properly according to local regulations
If product malfunctions, discontinue use immediately

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. CE marked for European compliance. RoHS compliant. Copyright © IKEA of Sweden AB. For support, visit www.ikea.com or contact your local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light doesn't turn on	Dead batteries, OFF switch	Replace batteries; ensure switch is ON; check polarity.
Motion sensor not working	Obstructions, wrong sensitivity	Clear detection path; adjust sensitivity dial; clean sensor window.
Light stays on constantly	Stuck sensor, test mode	Turn OFF/ON; ensure not in TEST mode; check for constant motion in area.
Low battery indicator flashing	Batteries depleted	Replace all 3 batteries with fresh alkaline batteries.
Light too dim	Low batteries, dirty lens	Replace batteries; clean LED lens with dry cloth.
Unit falls off door	Weak adhesive, improper surface	Clean surface thoroughly; reapply adhesive or use screws.

Reset: Remove batteries for 30 seconds, then reinsert.

Service: Contact IKEA customer service for replacement if under warranty.