IKEA STORHAGA 304.327.38 Table Lamp instructions manual

The IKEA STORHAGA 304.327.38 is a modern table lamp designed for ambient lighting. It features a sturdy base, a fabric shade, an E26/E27 bulb socket (max 7W LED or 13W CFL), an in-line switch on the cord, and a plug for standard 120V AC outlets. This manual covers safety, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Safety Instructions 4. Assembly & Installation 5. Operation 6. Care & Maintenance 7. Troubleshooting 8. Specifications 9. Warranty & Support

Features at a Glance

Key components: Fabric shade, metal/plastic base, E26/E27 bulb socket, in-line switch, power cord with plug.

Feature	Description
Shade	Fabric, diffuses light for soft illumination
Base	Sturdy construction for stability
Bulb Socket	E26/E27, compatible with LED/CFL bulbs (max 7W LED or 13W CFL)
Switch	In-line on cord for easy on/off control
Power Cord	Standard length with plug for 120V AC
Design	Modern, fits various interior styles

Parts Included

Fabric lamp shade (1)
Lamp base (1)
Bulb socket assembly with cord (1)
Hardware (screws/nuts if required) (set)
Instruction manual (this document)

Note: Light bulb not included. Ensure you have a compatible bulb (E26/E27 base, max 7W LED or 13W CFL).

Safety Instructions

WARNING! To reduce risk of fire, electric shock, or injury:

Unplug lamp before assembly, cleaning, or bulb replacement.
Use only with compatible bulbs (E26/E27, max 7W LED or 13W CFL). Do not exceed wattage.
Place on stable, flat surface away from edges where it could be knocked over.
Keep away from water, moisture, and heat sources.
Do not use if cord or plug is damaged. Contact IKEA support.
This lamp is for indoor use only.
Do not modify cord or plug.

Assembly & Installation

Follow these steps to assemble your lamp.

Prepare: Unpack all parts on a clean, soft surface to avoid scratches.
Attach Base: If base is separate, align with lower section and secure with provided hardware (if any).
Install Bulb Socket: The socket assembly is typically pre-attached to the base. Ensure it is firmly seated.
Attach Shade: Gently place fabric shade over bulb socket. It may clip or screw into place—follow shape alignment.
Insert Bulb: Screw compatible bulb (E26/E27, max 7W LED or 13W CFL) into socket. Do not overtighten.
Final Check: Ensure all parts are secure and cord is untangled.

CAUTION! Do not force parts. If something doesn't fit, check alignment.

Operation

Plug In: Insert plug into standard 120V AC wall outlet.
Turn On/Off: Use the in-line switch on the cord to control power.
Adjust Placement: Place lamp on stable surface for desired lighting effect. Cord should not be pinched or under tension.

Tip: For best light diffusion, ensure shade is properly positioned and clean.

Care & Maintenance

Unplug lamp before any maintenance.

Cleaning: Wipe base with dry, soft cloth. For fabric shade, use a soft brush or vacuum with brush attachment to remove dust. Do not use liquids or abrasive cleaners.
Bulb Replacement: Allow bulb to cool if recently on. Unscrew old bulb, screw in new compatible bulb (E26/E27, max 7W LED or 13W CFL).
Storage: Store in a dry place, preferably in original packaging.

CAUTION! Never immerse lamp in water or use wet cloth on electrical parts.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out; not plugged in; switch off; faulty outlet	Replace bulb; ensure plug is fully inserted; check switch; try another outlet.
Flickering light	Loose bulb; incompatible bulb; faulty socket	Tighten bulb; use correct bulb type; if persists, contact support.
Lamp gets hot	Bulb wattage too high; poor ventilation	Use bulb within specified max wattage; ensure lamp is in open area.
Shade unstable	Not properly attached	Turn off, unplug, and reseat shade according to assembly steps.
No power, cord/plug damaged	Physical damage	Unplug immediately. Do not use. Contact IKEA support.

Specifications

Model: STORHAGA 304.327.38
Type: Table Lamp
Bulb Socket: E26/E27
Max Bulb Wattage: 7W LED or 13W CFL (bulb not included)
Power Supply: 120V AC, 60Hz
Switch: In-line on cord
Cord Length: Approximately 6 ft (1.8 m)
Materials: Fabric shade, metal/plastic base
Color/Finish: As per product variant
Intended Use: Indoor residential

Warranty & Support

This IKEA product is covered by IKEA's limited warranty. Refer to the IKEA warranty document included with purchase or available at IKEA stores for terms.

For assistance:

Visit the IKEA website: www.ikea.com
Contact IKEA customer support: 1-888-888-4532
Visit your local IKEA store.

Recycling: Dispose of the lamp and bulb according to local electronic waste regulations. Do not dispose with household trash.