IKEA STJÄRNSTATUS 205.222.87 Refrigerator instructions manual

The IKEA STJÄRNSTATUS 205.222.87 is a freestanding refrigerator with adjustable shelves, a spacious freezer compartment, energy-efficient operation, and a sleek design to fit various kitchen decors. It features temperature controls, door storage, and reversible doors for flexible installation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Using the Refrigerator 8. Energy Saving Tips 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable glass shelves, Freezer compartment with ice tray, Temperature control dial, Door bins, Reversible doors, Leveling feet.

FeatureDescription
Adjustable shelvesGlass shelves can be repositioned for flexible storage
Freezer compartmentIncludes ice tray and storage basket
Temperature controlDial for adjusting cooling intensity
Door binsStorage for bottles and small items on door
Reversible doorsHinges can be switched for left or right opening
Leveling feetAdjustable feet for stability on uneven floors
Energy classEnergy-efficient operation
Crisper drawerHumidity-controlled drawer for fruits and vegetables
Interior lightLED light for illumination when door is open
Power cordStandard plug for wall outlet

Installation

Unpack and inspect contents. Place in desired location with adequate ventilation.

  1. Position the refrigerator: Ensure at least 2 inches of space on sides and back for airflow.
  2. Level the unit: Adjust the front leveling feet using a wrench until stable.
  3. Reverse doors (if needed): Follow hinge reversal instructions in manual.
  4. Clean interior: Wipe shelves and interior with mild soapy water, then dry.
  5. Plug into AC power: Use a dedicated 120V outlet.

WARNING! Refrigerator is heavy; use two people for moving. Ensure floor is level to prevent vibration.

First-Time Setup

After installation, allow refrigerator to cool before loading food.

  1. Initial cooling: Plug in, turn temperature control to middle setting, and let run empty for 2-3 hours.
  2. Set temperature: Adjust control dial; recommended setting is 3-4 for refrigerator, MAX for freezer.
  3. Organize shelves: Arrange shelves according to your storage needs.
  4. Load food: Place items evenly, avoiding blocking air vents.

CAUTION! Do not overload shelves. Allow hot food to cool before placing inside.

Specifications

Controls and Settings

Temperature is controlled via a dial inside the refrigerator compartment.

Temperature Dial: Typically numbered 1-5 or MIN-MAX. Higher numbers mean colder temperatures.

Recommended Settings: For normal use, set to 3 or 4. In hot environments or when fully loaded, use a higher setting. Use MAX for fastest cooling or freezing.

Freezer Control: The freezer temperature is linked to the main dial; turning it colder also makes the freezer colder.

Door Alarm: Some models may have an alert if door is left open.

Connecting to Power

Use a properly grounded electrical outlet.

  1. Ensure refrigerator is unplugged during initial placement.
  2. Plug the power cord directly into a 120V, 15-amp dedicated outlet.
  3. Do not use an extension cord or power strip.
  4. After plugging in, the interior light should turn on when door is opened.

Tip: Avoid sharing the outlet with other high-power appliances to prevent circuit overload.

Using the Refrigerator

Optimize storage for efficiency and food preservation.

  1. Shelves: Adjust height to accommodate tall items. Glass shelves are easy to clean.
  2. Crisper drawer: Use for fruits and vegetables. Adjust humidity slider if available.
  3. Door bins: Store condiments, drinks. Do not place heavy items here.
  4. Freezer: Use baskets for organization. Ice tray can be filled with water to make ice.
  5. Temperature monitoring: Use a refrigerator thermometer to verify internal temperature (ideal fridge: 37°F, freezer: 0°F).

WARNING! Do not block air circulation vents inside. Keep door closed as much as possible.

Energy Saving Tips

Place refrigerator away from heat sources (oven, sunlight). Ensure door seals are clean and tight. Allow hot food to cool before storing. Do not overfill; allow air to circulate. Defrost freezer regularly if manual defrost model.

Care & Cleaning

Unplug before cleaning. Interior: Use solution of baking soda and water or mild detergent. Wipe shelves and walls. Exterior: Clean with damp cloth; avoid abrasive cleaners. Door seals: Wipe with soapy water to maintain seal. Condenser coils (rear): Vacuum dust periodically for efficiency.

CAUTION! Never use harsh chemicals, scouring pads, or hot water. Do not pour water directly into unit.

Regulatory Information

This appliance complies with relevant safety standards. Disposal: At end of life, dispose according to local regulations for electrical appliances. For service or support, contact IKEA customer service or visit www.ikea.com.

Troubleshooting

SymptomPossible CauseCorrective Action
Refrigerator not coolingPower issue, thermostat settingCheck plug and outlet; ensure dial is not at MIN; allow time after first plug-in.
Excessive frost in freezerDoor seal leak, frequent openingCheck seal for gaps; defrost if manual; avoid leaving door open.
Unusual noiseLeveling, items touching backEnsure unit is level; check for vibrating bottles; ensure nothing is touching rear coils.
Water pooling inside or underDrain clogged, door not sealingCheck drain hole at back of fridge interior; clear if blocked; inspect door seal.
Light not workingBulb burnt out, door switchReplace LED/bulb; check door switch mechanism.

Reset: Unplug for 5 minutes, then plug back in.

Service: Contact IKEA customer support or authorized service center.

IKEA STJÄRNSTATUS 205.222.87 Refrigerator instructions manual © - All Rights Reserved 2025