IKEA STENSUND 404.676.85 Cover Panel instructions manual

The IKEA STENSUND 404.676.85 Cover Panel is designed to conceal the front of kitchen cabinets or other furniture, providing a clean and finished appearance. It is typically used in conjunction with IKEA's METOD or SEKTION kitchen systems. Below are key sections for safety, features, installation, setup, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Information 4. Installation 5. Mounting Instructions 6. Adjustment & Alignment 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Cover panel, mounting brackets (if included), screws, and installation hardware.

FeatureDescription
MaterialTypically particleboard with foil or melamine finish
Color/FinishVarious options to match IKEA kitchen fronts
CompatibilityDesigned for METOD or SEKTION cabinet frames
FunctionConceals cabinet sides or gaps for a seamless look
MountingUses standard IKEA screws and brackets

Package Contents

Unpack and verify all parts before starting installation.

NOTE: Some components may be sold separately. Refer to packaging or IKEA website for details.

Safety Information

Read all instructions before assembly and installation.

  1. Use appropriate tools (screwdriver, level, drill).
  2. Ensure cabinet frame is securely mounted to wall.
  3. Lift with care; panel may be heavy or awkward.
  4. Keep small parts away from children.

WARNING! Ensure the cabinet structure is stable and can support the panel. Use two people for handling larger panels.

Installation

Tools needed: Phillips screwdriver, level, measuring tape, pencil.

  1. Prepare area: Clear workspace around cabinet.
  2. Identify mounting points: Refer to cabinet frame instructions.
  3. Attach brackets: Secure mounting brackets to cabinet frame using provided screws.
  4. Position panel: Align cover panel with brackets.
  5. Secure panel: Attach panel to brackets using screws. Do not overtighten.
  6. Check alignment: Use level to ensure panel is straight.

Tip: Have a helper hold the panel during installation for easier alignment.

Mounting Instructions

Detailed steps for attaching to METOD/SEKTION frames.

  1. Locate pre-drilled holes on cabinet frame.
  2. If brackets are separate, attach them to frame first.
  3. Hold panel against frame, ensuring it covers desired area.
  4. Insert screws through panel into brackets or frame.
  5. Tighten screws gradually, alternating to avoid warping.
  6. Final check: Ensure panel is flush and secure.

CAUTION! Do not force screws; use correct size to prevent damage.

Adjustment & Alignment

If panel is not aligned properly:

Note: Some adjustment may be needed depending on wall unevenness.

Care & Maintenance

Clean with damp cloth and mild detergent. Avoid abrasive cleaners.

CAUTION! Do not use harsh chemicals, solvents, or excessive water. Wipe dry immediately.

Specifications

Troubleshooting

SymptomPossible CauseCorrective Action
Panel does not fitWrong size/modelVerify article number and dimensions.
Panel not straightUneven mounting or wallLoosen screws, adjust, use level.
Screws not holdingStripped holes or incorrect screwsUse larger screws or wall anchors if into drywall.
Gaps visibleMisalignment or warpingRe-align panel; check cabinet frame squareness.
Doors/drawers hit panelPanel mounted too closeReposition panel to allow clearance.

Note: For persistent issues, consult IKEA store or website.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or receipt for details.

For support, visit www.ikea.com or contact your local IKEA store.

IKEA STENSUND 404.676.85 Cover Panel instructions manual © - All Rights Reserved 2025