IKEA STENSELE 392.971.56 Star Base instructions manual

The IKEA STENSELE 392.971.56 Star Base is a sturdy, multi-point support base designed for stability and safety. It features a star-shaped design for even weight distribution, durable construction materials, and a secure connection interface. Below are key sections for safety, assembly, installation, usage, maintenance, and troubleshooting.

1. Features at a Glance 2. Parts Included 3. Assembly Instructions 4. Installation Guide 5. Specifications 6. Safety Precautions 7. Usage Guidelines 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Star-shaped base plate, Mounting brackets, Connection bolts, Rubber feet, Assembly hardware.

FeatureDescription
Star-shaped designProvides enhanced stability and weight distribution
Durable steel constructionEnsures long-lasting strength and support
Rubber feetPrevents slipping and protects floor surfaces
Pre-drilled mounting holesFor secure attachment to supported furniture
Powder-coated finishResists corrosion and scratches
Multi-point supportReduces wobble and increases safety
Easy assemblyIncludes all necessary hardware and tools
Weight capacityDesigned to support substantial loads safely
Compact designFits various furniture configurations
Universal compatibilityWorks with specified IKEA furniture lines

Parts Included

Unpack and verify all components before assembly.

  1. Star Base Plate (1 piece)
  2. Mounting Brackets (4 pieces)
  3. Connection Bolts M8 x 25mm (8 pieces)
  4. Rubber Feet (4 pieces)
  5. Hex Key (1 piece)
  6. Assembly Instructions (this manual)

WARNING! Do not discard any packaging until all parts are verified. Contact IKEA if any parts are missing.

Assembly Instructions

Follow these steps carefully for proper assembly.

  1. Lay the star base plate on a flat, protected surface with the top side facing up.
  2. Attach the rubber feet to the bottom of each base arm by pressing firmly into the pre-molded slots.
  3. Position the mounting brackets at the designated points on the base plate, aligning the holes.
  4. Insert the connection bolts through the bracket and base plate holes.
  5. Using the provided hex key, tighten all bolts securely but do not overtighten.
  6. Ensure all brackets are firmly attached and the base does not rock.

CAUTION! Assemble on a soft surface to avoid scratches. Use two people for handling larger components.

Installation Guide

Installing the base to your furniture unit.

  1. Place the assembled star base in the desired location, ensuring adequate clearance.
  2. With assistance, lift the furniture unit and carefully lower it onto the base.
  3. Align the furniture's mounting points with the brackets on the star base.
  4. Secure the furniture to the brackets using the hardware specified for your furniture unit (not included with base).
  5. Check all connections for tightness and stability.

Tip: Ensure the floor is level before final installation to prevent uneven stress.

Specifications

Safety Precautions

Critical safety information for use and installation.

General Safety: Always place on a solid, level floor. Do not use on soft or uneven surfaces like thick carpets. Ensure the base is fully assembled and all bolts are tight before applying weight.

Load Safety: Do not exceed the maximum load capacity. Distribute weight evenly across the supported surface. Avoid placing excessive weight on a single arm of the base.

Installation Safety: Use at least two people to lift and position furniture onto the base. Keep children and pets away during assembly and installation. Periodically check tightness of all connections.

Usage Guidelines

Proper use for optimal performance and longevity.

  1. Intended for indoor use only on stable, level floors.
  2. Regularly inspect the base and connections for signs of loosening, damage, or corrosion.
  3. Do not drag furniture attached to the base; lift to reposition.
  4. Avoid exposing the base to excessive moisture, heat sources, or direct sunlight for prolonged periods.
  5. Use only with furniture units specified as compatible by IKEA.

WARNING! Never stand or sit on the base or supported furniture if not designed for such load.

Care & Maintenance

Clean with a dry or slightly damp cloth. Do not use abrasive cleaners, scouring pads, or harsh chemicals.

CAUTION! Do not spray liquids directly onto the base. Ensure it is completely dry after cleaning. Check rubber feet periodically for wear and replace if damaged.

Troubleshooting

SymptomPossible CauseCorrective Action
Base wobblesUneven floor; Loose bolts; Missing rubber footPlace on level surface; Tighten all connection bolts; Ensure all four rubber feet are attached.
Squeaking noiseMetal-on-metal friction; Loose componentsCheck all bolts for tightness; Ensure brackets are properly aligned and not rubbing.
Furniture feels unstableExceeded weight limit; Weight not distributed evenlyReduce load; Redistribute weight centrally over the base.
Scratches on floorDamaged or missing rubber feet; Debris under baseInspect and replace damaged rubber feet; Clean floor and base feet before placement.
Difficulty assemblingParts misaligned; Hardware incorrectFollow steps in order; Verify you are using the correct bolts and brackets.

Note: If problems persist, disassemble and restart the assembly process carefully.

Warranty & Support

This IKEA product is covered by the IKEA commercial warranty. Refer to the IKEA warranty terms for details. For assembly support, missing parts, or other inquiries, visit the IKEA website or contact your local IKEA store.

IKEA Customer Support: Visit www.ikea.com or call the customer service number for your country.

Recycling: At end of life, disassemble and recycle materials according to local regulations.

IKEA STENSELE 392.971.56 Star Base instructions manual © - All Rights Reserved 2025