IKEA SPIKEN 704.691.45 Night Light instructions manual

The IKEA SPIKEN 704.691.45 is a plug-in night light designed for safe, low-level illumination in dark areas. It features an energy-efficient LED light source, automatic dusk-to-dawn sensor, compact and durable plastic housing, and a standard plug for easy installation. Below are key sections for safety, features, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Installation 4. Operation 5. Specifications 6. Care & Cleaning 7. Troubleshooting

Features at a Glance

Key components: LED light module, Photocell sensor, Plastic housing, Standard plug.

Feature	Description
LED Light Source	Energy-efficient, long-lasting illumination
Automatic Sensor	Turns on at dusk, off at dawn
Compact Design	Fits standard outlets without blocking adjacent plugs
Durable Housing	Made of impact-resistant plastic
Plug-in Operation	No wiring required; simply plug into outlet

Safety Information

Read all instructions before use.

For indoor use only. Do not use outdoors or in wet locations.
Do not cover the light or sensor. Ensure proper ventilation.
Use only with standard 120V AC, 60Hz outlets.
Keep away from children and pets to prevent tampering.
Unplug before cleaning or when not in use for extended periods.

WARNING! Do not attempt to disassemble or modify the night light. Risk of electric shock or fire.

Installation

Unpack and inspect contents. Ensure outlet is functioning and accessible.

Choose location: Select a standard wall outlet in a dark area (e.g., hallway, bathroom, bedroom).
Clear area: Ensure outlet is not obstructed and sensor has clear line of sight.
Plug in: Insert the night light firmly into the outlet until fully seated.
Verify operation: The light should turn on automatically in low light conditions.

CAUTION! Do not force plug into outlet. Ensure plug is fully inserted to prevent overheating.

Operation

The night light operates automatically based on ambient light levels.

Automatic mode: The built-in photocell detects darkness and turns the LED on at dusk.
Daylight operation: The light turns off automatically at dawn or when sufficient light is detected.
Manual override: Unplug to turn off completely.

Tip: For optimal performance, install in an area not exposed to other light sources at night.

Specifications

Model: SPIKEN 704.691.45
Light Source: LED (non-replaceable)
Sensor: Photocell (dusk-to-dawn)
Power Consumption: 0.5W
Input Voltage: 120V AC, 60Hz
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Housing Material: Plastic
Dimensions: 2.4" x 1.6" x 1.2" (approx.)

Care & Cleaning

Unplug the night light before cleaning.

Use a soft, dry cloth to wipe the housing and lens.
Do not use liquids, cleaners, or aerosols.
Ensure the sensor window is clean and unobstructed.

CAUTION! Do not immerse in water or use abrasive materials. Keep away from heat sources.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	No power / Faulty outlet	Plug into a different outlet; check circuit breaker.
Light stays on during day	Sensor obstructed or faulty	Clean sensor window; ensure no direct light on sensor.
Light flickers	Loose connection	Unplug and firmly reinsert into outlet.
Light is dim	End of LED life / Dirty lens	Clean lens; replace unit if LED fails.
Unit feels warm	Normal operation / Overloaded outlet	Ensure proper ventilation; do not overload outlet.

Disposal: Dispose of according to local electronic waste regulations.

Support: For assistance, contact IKEA customer service or visit www.ikea.com.