IKEA SONGESAND 803.667.88 Drawer instructions manual

The IKEA SONGESAND 803.667.88 is a drawer unit designed for the SONGESAND bed frame series, featuring a smooth-gliding mechanism, sturdy construction from particleboard and fiberboard, and a white finish. It includes all necessary assembly hardware (screws, cam locks, dowels) and requires basic tools for installation. Below are key sections for safety, parts list, step-by-step assembly, installation, adjustment, care, and troubleshooting.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Step-by-Step Assembly 5. Installation into Bed Frame 6. Drawer Adjustment & Alignment 7. Weight Capacity & Limitations 8. Care & Cleaning 9. Disassembly & Moving 10. Warranty Information 11. Troubleshooting

Parts & Hardware Included

Verify all parts before starting assembly. Contact IKEA if any items are missing.

Part Name	Quantity	Description/Part Number
Drawer Front Panel	1	White, pre-drilled for handles
Drawer Side Panels	2	Left & right, with glide rail slots
Drawer Back Panel	1	With pre-attached glide wheels
Drawer Bottom Panel	1	Fiberboard, fits into grooves
Glide Rails (Pair)	1 set	Metal, for smooth drawer operation
Cam Lock Screws	8	For panel connections
Dowel Pins	6	For alignment
Rail Mounting Screws	12	For attaching glide rails to bed frame
Handle Screws	2	For attaching optional handle (not included)

Tools Required

Not included. Gather these tools before beginning.

Phillips Screwdriver (size #2) or Cordless Drill/Driver (low torque setting recommended)
Hammer (for gently tapping dowels)
Soft Mallet (optional, for adjusting panels without damage)
Measuring Tape (for verifying alignment)
Level (optional, for checking installation)

Tip: Use the correct screwdriver size to avoid stripping screw heads.

Safety Instructions

Read all instructions before assembly. Ensure a safe workspace.

Work Area: Assemble on a clean, flat, protected surface to avoid scratching parts.
Lifting: The assembled drawer is moderately heavy; lift with your legs, not your back.
Children & Pets: Keep small parts away during assembly to prevent choking hazards.
Hardware: Do not overtighten screws; this can strip the particleboard.
Final Check: Ensure all connections are secure and the drawer operates smoothly before use.

WARNING! Do not stand or sit on the drawer. It is designed for storage only.

Step-by-Step Assembly

Follow the numerical order shown in the included pictorial guide. Do not fully tighten screws until step is complete.

Attach Side Panels to Front: Insert dowels into the front panel. Align side panels and secure with cam lock screws. Hand-tighten only.
Install Drawer Bottom: Slide the fiberboard bottom panel into the grooves on the front and side panels. It should lie flat.
Attach Back Panel: Align the back panel with the side panels and bottom groove. Secure with cam lock screws.
Final Tightening: Go back and fully tighten all cam lock screws. Ensure the drawer is square.
Attach Glide Wheels (if not pre-attached): Screw the wheels onto the bottom rear corners of the drawer back panel.

CAUTION! Handle panels with care to avoid chipping the edges.

Installation into Bed Frame

The drawer is designed to slide into the designated space under the SONGESAND bed frame.

Mount Glide Rails: Using the provided screws, attach the metal glide rails to the inside of the bed frame's side supports. Ensure they are level and parallel.
Insert Drawer: Tilt the drawer slightly, hook the front wheels onto the front of the rails, then lower the back wheels onto the rails.
Test Slide: Gently push and pull the drawer. It should glide smoothly without catching or wobbling.
Optional Handle: If using a handle, attach it to the drawer front with the provided screws.

Tip: If the drawer binds, check that the rails are straight and the drawer is square.

Drawer Adjustment & Alignment

If the drawer is uneven, sticks, or doesn't close fully, minor adjustments can be made.

Issue	Adjustment Method
Drawer sticks or drags	Check rails for debris. Loosen rail mounting screws slightly, realign, and retighten.
Drawer is uneven (front higher/lower)	Adjust the glide wheels on the back panel; most models allow for height adjustment by turning the wheel bracket.
Gap between drawer front and bed frame	Ensure the bed frame is on a level surface. Adjust the front stops on the glide rails if available.
Drawer wobbles side-to-side	Tighten all cam locks in the drawer box. Ensure glide rails are securely fastened to the bed.

Weight Capacity & Limitations

Maximum Load: 55 lbs (25 kg) evenly distributed.
Recommended Use: Bedding, clothing, pillows, and other lightweight bedroom items.
Do Not Store: Liquids, extremely heavy items (e.g., books, tools), or valuables requiring security.
Drawer Stop: The glide rails include a stop mechanism to prevent the drawer from being pulled completely out. Do not force it past this stop.

WARNING! Exceeding the weight limit can damage the drawer, glides, and bed frame.

Care & Cleaning

To maintain appearance and function.

Surface: Wipe with a damp, soft cloth. Dry immediately.
Stains: Use mild soapy water. Never use abrasive cleaners, scouring pads, or solvents.
Glide Mechanism: Periodically vacuum dust from the rails. A light application of silicone-based lubricant can be used on metal glide parts if they become noisy (do not use oil or grease).
Interior: Line the drawer bottom with fabric or paper to protect it.

CAUTION! Avoid excessive moisture. Do not steam clean.

Disassembly & Moving

To move or store the drawer unit.

Empty the drawer completely.
Pull drawer out to the stop, lift the front slightly, and pull forward to disengage from the glide rails.
To fully disassemble, reverse the assembly steps by loosening the cam locks.
Keep all hardware in a labeled bag taped to one of the panels.
Protect panels with blankets or cardboard during transport to prevent scratches.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included with your purchase or available at IKEA stores and www.IKEA.com for full terms, conditions, and duration. The warranty covers material and manufacturing defects under normal household use. It does not cover damage from improper assembly, accident, modification, or commercial use. Proof of purchase (receipt) is required for all warranty service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer won't slide in/out smoothly	Misaligned rails, debris, damaged wheels	Check rail alignment and clean tracks. Ensure wheels turn freely.
Drawer is crooked or tilts	Uneven floor, loose cam locks, uneven wheels	Level the bed frame. Tighten all drawer assembly screws. Adjust wheel height.
Gaps between drawer panels	Incomplete tightening during assembly	Fully tighten all cam lock screws. Ensure dowels are fully seated.
Drawer front hits bed frame	Rails mounted too far forward	Loosen rail screws, reposition rails slightly backward, retighten.
Squeaking noise when opening	Dry metal glides	Apply a small amount of silicone spray (not oil) to the metal glide surfaces.
Missing or damaged part	Packaging error or damage in transit	Contact IKEA Customer Service with your product name (SONGESAND) and article number (803.667.88).

For Support: Visit www.IKEA.com or contact your local IKEA store.