IKEA SOLLERÖN 203.736.21 Corner Section instructions manual

The IKEA SOLLERÖN 203.736.21 is a modular outdoor corner sofa section designed for durability and comfort. Constructed from powder-coated aluminum frame with synthetic rattan weave, it features water-resistant cushions with removable covers. This section is part of a modular system that can be combined with other SOLLERÖN pieces to create various seating configurations. Below are key sections for safety, assembly, care, maintenance, and warranty information.

Package Contents & Tools Required

Before assembly, verify all parts are present and undamaged.

Tools you need: Phillips screwdriver, rubber mallet (optional).

Safety Instructions

Important safety information to prevent injury and damage.

1. Assembly: Assemble on a soft, clean surface to avoid scratching. Use two people for handling the frame.
2. Weight Limit: Maximum load 330 lbs (150 kg) per section distributed evenly.
3. Placement: Use only on even, stable ground. Do not place on uneven surfaces or soft ground.
4. Children: Do not allow children to climb or stand on the furniture.
5. Weather: Designed for outdoor use, but prolonged direct sunlight may fade colors. Use protective cover during extreme weather.

WARNING! Frame is heavy; lift with your legs, not your back. Ensure all bolts are tightened securely.

Assembly Instructions

Follow these steps to assemble your corner section.

1. Attach Legs: Turn frame upside down on a protected surface. Insert legs into pre-drilled sockets at each corner. Tap gently with rubber mallet if needed. Secure each leg with 2 bolts and washers using the provided Allen key. Tighten firmly.
2. Install Connection Brackets: Locate the pre-drilled holes on the side of the frame. Align the connection brackets and secure with the remaining bolts. These are used to connect to other SOLLERÖN sections.
3. Flip Upright: Carefully turn the assembled frame right-side up with assistance.
4. Place Cushions: Position the corner seat cushion onto the frame, ensuring it fits snugly into the corner. Place the corner back cushion against the backrest.

Tip: Do not fully tighten bolts until all legs are attached and the frame is square.

Specifications

• Product Name: SOLLERÖN Corner Section
• Article Number: 203.736.21
• Dimensions (WxDxH): 35" x 35" x 30" (89cm x 89cm x 76cm)
• Seat Height: 17" (43cm)
• Frame Material: Powder-coated aluminum, synthetic rattan (polyethylene)
• Cushion Fill: Polyurethane foam
• Cushion Cover: 100% polyester (water-resistant, removable)
• Weight Capacity: 330 lbs (150 kg) per section
• Color: Dark brown/Beige (check specific product label)

Connecting Modules

This corner section is designed to connect with other SOLLERÖN pieces (sofa sections, armrests, etc.).

1. Ensure both sections are on a level surface and close together.
2. Align the connection brackets of the two sections.
3. Insert the connecting pins (sold separately, part number 987.654.32) through the aligned brackets.
4. Secure with the provided locking clips to prevent separation.
5. Test the connection by gently pushing the sections together; there should be minimal movement.

Note: For a stable large configuration, connect sections at each available connection point.

Cushion Installation & Care

Proper care extends the life of your cushions.

• Installation: Ensure cushions are dry before placing them. Match the corner cushion shape to the frame.
• Removing Covers: Most covers are removable via zippers. Unzip fully and remove for washing.
• Washing: Machine wash cold, gentle cycle. Use mild detergent. Do not bleach. Tumble dry low or air dry.
• Water Resistance: While covers are water-resistant, prolonged exposure to rain can allow water to seep in. Dry cushions thoroughly if they get wet.
• Fluffing: Fluff cushions regularly to maintain shape and comfort.

Maintenance & Cleaning

Frame (Synthetic Rattan): Clean with a soft brush or cloth dampened with mild soapy water. Rinse with clean water and wipe dry. Do not use abrasive cleaners or solvents.

Aluminum Legs: Wipe with a damp cloth. For tougher stains, use a non-abrasive cleaner.

Cushions: See section 7. Spot clean with a damp cloth and mild soap if needed.

CAUTION! Do not use pressure washers, steam cleaners, or harsh chemicals. Avoid dragging the furniture across surfaces.

Seasonal Storage

For best longevity during off-season or extreme weather.

1. Clean the entire piece thoroughly as per maintenance instructions. Ensure it is completely dry.
2. Remove all cushions. Store cushions in a cool, dry place indoors, preferably in a breathable storage bag.
3. If storing the frame outdoors, use a breathable, waterproof furniture cover designed for outdoor use. Ensure the frame is on a raised, dry surface.
4. If storing indoors, disassemble if possible (remove legs) to save space.

Tip: Never store cushions while damp, as this can lead to mold and mildew.

Warranty Information

IKEA SOLLERÖN furniture comes with a limited warranty. Refer to your local IKEA warranty terms for full details.

• Warranty Period: Typically 10 years for frame, 2 years for cushions (varies by country).
• Coverage: Covers material and manufacturing defects under normal household use and proper assembly/maintenance.
• Not Covered: Damage from improper assembly, accident, misuse, neglect, commercial use, or exposure to conditions beyond normal outdoor weathering.
• Claim Process: Keep your receipt. Contact IKEA customer service in your country or visit the IKEA store where purchased.

Troubleshooting

Missing Parts or Damage: Contact IKEA customer service with your article number (203.736.21) and receipt.

Support: Visit www.ikea.com or your local IKEA store for assistance.