IKEA SOLKLINT 404.642.86 Table Lamp instructions manual

The IKEA SOLKLINT 404.642.86 is a stylish table lamp featuring a glass shade with a metal base, designed for ambient lighting. It requires assembly and uses a max 7W E14 LED bulb (not included). Below are key sections for safety, parts identification, assembly, installation, operation, care, and troubleshooting.

1. Parts & Components 2. Safety Information 3. Assembly Instructions 4. Installation & Setup 5. Specifications 6. Operation 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Parts & Components

Key components included in the package: Glass shade, Metal base, Lamp holder (E14 socket), Power cord with switch, Assembly screws, Instruction manual.

Part	Description
Glass shade	Frosted glass, provides diffused light
Metal base	Sturdy base for stability
Lamp holder	E14 socket for bulb
Power cord with switch	On/off switch integrated on cord
Assembly screws	For securing components
Instruction manual	This document

Safety Information

Read all instructions before assembly and use.

Use only with E14 LED bulb, max 7W. Do not exceed wattage.
Ensure lamp is unplugged during assembly and bulb replacement.
Place on stable, flat surface away from edges.
Keep away from water, moisture, and heat sources.

WARNING! Risk of electric shock. Do not disassemble lamp holder or modify cord. If cord is damaged, discontinue use immediately.

Assembly Instructions

Estimated assembly time: 10-15 minutes. Tools required: None (hand-tighten only).

Place metal base on flat surface.
Insert lamp holder into the base opening and secure with provided screw (hand-tighten).
Carefully place glass shade over lamp holder, aligning it with the base.
Gently twist shade clockwise until snug (do not overtighten).
Route power cord through base channel to desired position.

CAUTION! Handle glass shade with care to avoid breakage. Do not force components during assembly.

Installation & Setup

Bulb Installation: Ensure lamp is unplugged. Insert E14 LED bulb (max 7W) into socket and twist gently until secure.
Power Connection: Plug power cord into standard 120V AC wall outlet.
Placement: Position lamp on stable, level surface. Ensure cord is not pinched or under tension.

Tip: For optimal light diffusion, ensure bulb is centered within shade.

Specifications

Model: SOLKLINT 404.642.86
Type: Table Lamp
Material: Glass shade, Metal base
Bulb: 1 x E14 socket, max 7W LED (not included)
Power Supply: 120V AC, 60Hz
Cord Length: Approximately 5.9 ft (1.8 m)
Dimensions: Height: 11.8" (30 cm), Base diameter: 5.9" (15 cm)
Weight: 2.2 lbs (1 kg)

Operation

To operate lamp:

Plug power cord into wall outlet.
Press switch on power cord to turn lamp ON/OFF.
Adjust placement as needed for desired lighting effect.

Note: Lamp is designed for ambient indoor use only. Not suitable for outdoor or damp locations.

Care & Maintenance

Unplug lamp before cleaning.

Glass Shade: Wipe with soft, dry cloth. For stubborn marks, use slightly damp cloth. Do not use abrasive cleaners.
Metal Base: Wipe with dry cloth. Avoid chemical cleaners.
Cord: Wipe with dry cloth. Do not immerse in water.

CAUTION! Never immerse lamp, cord, or plug in water or other liquids.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power/bulb issue	Check outlet; ensure bulb is properly installed and functional; check cord switch.
Flickering light	Loose bulb or incompatible bulb	Turn off and unplug; tighten bulb; ensure it is max 7W LED E14.
Lamp gets hot	High wattage bulb	Use only recommended LED bulb (max 7W).
Shade loose or wobbly	Improper assembly	Unplug lamp; gently twist shade clockwise to secure.
Cracked or broken glass	Physical damage	Discontinue use immediately. Handle replacement shade with care.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to IKEA warranty terms for details. For assistance:

Visit: www.ikea.com
Contact IKEA customer support: 1-888-888-4532
Have model number (404.642.86) ready when contacting support.

Recycling: Dispose of lamp according to local electronic waste regulations. Do not dispose with household trash.