IKEA SOLKLINT 104.642.83 Table Lamp instructions manual

The IKEA SOLKLINT 104.642.83 is a stylish table lamp featuring a glass shade with a metal base, designed for ambient lighting. It uses a maximum E14 15W LED bulb (not included), operates on 220-240V~ 50/60Hz, and includes an in-line switch. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Package Contents & Specifications 2. Safety Instructions 3. Assembly Instructions 4. Operation & Use 5. Care & Maintenance 6. Troubleshooting 7. Warranty & Support

Package Contents & Specifications

Before assembly, verify all parts are present and undamaged.

ComponentQuantityDescription
Glass Shade1Frosted glass, handles with care
Metal Base1Powder-coated steel
Lamp Holder1E14 socket, pre-installed in base
Cord Set with Switch11.8m length, in-line switch
Assembly Hardware1 setScrews as needed
Instruction Manual1This document

Safety Instructions

WARNING! To reduce risk of fire, electric shock, or injury:

  1. Read all instructions before assembly and use.
  2. This lamp is for indoor use only. Do not use outdoors or in wet/damp locations.
  3. Use only with the specified E14 LED bulb, max 15W. Do not exceed wattage.
  4. Ensure the lamp is unplugged before assembly, cleaning, or bulb replacement.
  5. Do not operate the lamp if the cord or plug is damaged, or if the lamp malfunctions.
  6. Place the lamp on a stable, level, heat-resistant surface away from flammable materials.
  7. Keep the cord away from heated surfaces and do not run under carpets or furniture.
  8. This product contains electrical parts. Do not attempt to disassemble or repair yourself.
  9. Not intended for use by children or persons with reduced capabilities without supervision.

CAUTION! The glass shade is fragile. Handle with care to avoid breakage and injury.

Assembly Instructions

Estimated assembly time: 10 minutes. Tools required: None (hand-tighten only).

  1. Prepare Workspace: Clear a soft, flat surface (e.g., a table with a towel) to prevent damage.
  2. Inspect Parts: Check all components from the package list. Do not use if any part is damaged.
  3. Attach Base to Shade:
    • Hold the metal base upright.
    • Carefully place the glass shade over the lamp holder, aligning it with the base.
    • Gently rotate the shade clockwise until it sits securely on the base. Do not overtighten.
  4. Install Bulb (not included):
    • Ensure the lamp is unplugged.
    • Screw an E14 LED bulb (max 15W) into the socket by turning clockwise. Do not force.
  5. Final Check: Ensure the shade is stable and the bulb is securely fitted. The cord and switch should be free.

Tip: Assemble with another person to safely handle the glass shade.

Operation & Use

  1. Power Connection: Plug the cord into a standard 220-240V wall outlet.
  2. Turning On/Off: Use the in-line switch on the cord to turn the lamp on or off.
  3. Positioning: Place the lamp on a stable table, desk, or bedside cabinet. Ensure the cord is not pinched.
  4. Bulb Replacement:
    • Unplug the lamp and allow the bulb to cool completely.
    • Carefully unscrew the old bulb counterclockwise.
    • Screw in a new E14 LED bulb (max 15W) clockwise.
    • Plug in and test.

WARNING! Never touch the bulb when the lamp is on or immediately after use, as it may be hot.

Care & Maintenance

Proper care ensures longevity and safe operation.

  1. Cleaning:
    • Always unplug the lamp before cleaning.
    • Use a dry, soft cloth to dust the metal base and cord.
    • For the glass shade, use a slightly damp cloth and wipe dry immediately. Do not use abrasive cleaners or chemicals.
  2. Storage: If not in use, store in its original packaging in a cool, dry place away from moisture.
  3. Inspection: Periodically check the cord, plug, and socket for any signs of damage. Do not use if damaged.

CAUTION! Never immerse the lamp, cord, or plug in water or other liquids.

Troubleshooting

SymptomPossible CauseCorrective Action
Lamp does not turn onNot plugged in / Switch off / Faulty bulb / Loose bulbPlug into outlet; ensure switch is ON; try a known-working bulb; ensure bulb is screwed in tightly.
Lamp flickersLoose bulb / Incompatible bulb / Faulty connectionTighten bulb; use only specified E14 LED bulb; check plug connection in outlet.
Shade is loose or wobblyNot properly attachedUnplug lamp. Gently rotate shade to secure it on the base. Do not overtighten.
OverheatingBulb wattage too high / Ventilation blockedUse only max 15W LED bulb; ensure lamp is in an open area, not covered by fabrics.
Cracked or broken glass shadeImpact or mishandlingUnplug lamp immediately. Do not use. Handle broken glass with care and dispose of properly. Contact IKEA for a replacement part.

Important: For any electrical issues not resolved above, discontinue use and contact IKEA support.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided at the time of purchase or on www.ikea.com.

Recycling: At end of life, do not dispose with household waste. Recycle according to local regulations for electrical and electronic equipment (WEEE). The symbol of a crossed-out wheelie bin indicates separate collection is required.

For assistance:
IKEA Customer Support: Visit the IKEA website for your country or contact your local IKEA store.
Spare Parts: For replacement parts (e.g., glass shade, cord set), visit an IKEA store or the IKEA website.

Model: SOLKLINT
Article Number: 104.642.83

IKEA SOLKLINT 104.642.83 Table Lamp instructions manual © - All Rights Reserved 2025