IKEA SOLBO 003.286.82 Table Lamp instructions manual

The IKEA SOLBO 003.286.82 is a modern table lamp featuring a fabric shade and a metal base. It requires assembly and uses a maximum E14 7W LED bulb (not included). This manual provides key sections for safety, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. Installation & Setup 4. Specifications 5. Controls and Operation 6. Safety Information 7. Care & Cleaning 8. Troubleshooting

Features at a Glance

Key components: Fabric shade, Metal base, E14 bulb socket, On/Off switch, Power cord.

Feature	Description
Shade Material	Fabric, provides diffused lighting
Base Material	Metal, provides stability
Bulb Socket	E14 (small screw)
Maximum Wattage	7W LED (equivalent to 40W incandescent)
Switch Type	Integrated inline cord switch or base switch
Power Cord	Standard power cord with plug
Dimensions	Approx. Height: 35 cm, Base Diameter: 15 cm
Design	Modern, minimalist design

Assembly Instructions

Unpack all parts and check contents against the parts list.

Prepare the base: Place the metal base on a flat, stable surface.
Attach the stem/neck: If applicable, screw the stem into the base securely.
Install the bulb socket: Ensure the socket is fixed in the top part of the lamp structure.
Attach the shade: Place the fabric shade over the bulb socket frame. It may clip, screw, or rest on the frame. Ensure it is secure and centered.
Route the cord: Ensure the power cord runs neatly from the base.

WARNING! Do not insert the bulb until assembly is complete and the lamp is unplugged.

Installation & Setup

After assembly, prepare the lamp for use.

Insert the bulb: Screw an E14 LED bulb (max 7W) into the socket. Do not overtighten.
Choose location: Place the lamp on a stable, level, and heat-resistant surface away from edges.
Plug in: Connect the power cord to a standard 120V AC wall outlet.
Test operation: Use the switch to turn the lamp on and off.

CAUTION! Use only the specified bulb type and wattage to prevent overheating and damage.

Specifications

Product Name/Article Number: SOLBO 003.286.82
Type: Table Lamp
Bulb Socket: E14
Max Power: 7W LED
Voltage: 120V AC, 60Hz
Materials: Shade: Fabric; Base/Structure: Metal
Cord Length: Approximately 1.5 meters
Weight: Approx. 0.8 kg

Controls and Operation

The lamp is operated via a simple switch.

Switch Location: Typically located on the power cord (inline switch) or on the base of the lamp.

Operation: Press or slide the switch to turn the lamp ON. Press or slide again to turn OFF.

Note: This lamp does not have a dimmer function. Do not use with an external dimmer switch unless specified as dimmable and using a compatible dimmable LED bulb.

Safety Information

IMPORTANT SAFETY INSTRUCTIONS – READ AND SAVE THESE INSTRUCTIONS

This lamp is for indoor use only.
Always disconnect the lamp from the power supply before assembly, cleaning, replacing the bulb, or when not in use for extended periods.
Use only an E14 LED bulb with a maximum rating of 7 Watts.
Do not use bulbs that are higher wattage than recommended.
Do not place the lamp near flammable materials (curtains, bedding, paper, etc.).
Do not cover the lamp with any material.
Do not immerse the lamp in water or other liquids.
Ensure the lamp is placed on a stable surface to prevent it from falling.
Keep the lamp out of reach of young children.
If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid a hazard.

Care & Cleaning

Always unplug the lamp and allow it to cool completely before cleaning.

Shade: Use a soft, dry cloth or a vacuum cleaner with a soft brush attachment to remove dust. Do not use water or liquid cleaners on the fabric shade.
Base and Metal Parts: Wipe with a soft, slightly damp cloth. Dry immediately. Do not use abrasive cleaners or solvents.
Bulb: Clean the bulb only when cool and disconnected. Wipe gently with a dry cloth.

CAUTION! Never spray cleaning agents directly onto the lamp. Moisture can damage electrical components and fabric.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Faulty bulb / Loose connection	Check if outlet works. Ensure bulb is screwed in properly. Try a known-working bulb of the correct type.
Lamp flickers	Loose bulb / Incompatible bulb / Faulty connection	Turn off, check and tighten bulb. Ensure bulb is a standard E14 LED. Check plug and outlet connection.
Lamp gets very hot	Bulb wattage too high / Ventilation blocked	Immediately turn off and unplug. Verify bulb is 7W LED max. Ensure shade is not covered and lamp has space around it.
Shade is unstable or crooked	Improper assembly	Turn off and unplug. Check that the shade is correctly and securely attached to the frame or base.
Switch does not work	Faulty switch / Internal wiring issue	Do not attempt to repair. Discontinue use and contact IKEA customer service.

Disposal: Dispose of the lamp and bulbs according to local regulations for electronic waste. Do not dispose of with household trash.

Warranty & Support: For assistance, contact IKEA customer service or visit www.IKEA.com. Please have the article number (003.286.82) ready.