IKEA SNÖDJUP 705.106.54 Night Light instructions manual

The IKEA SNÖDJUP 705.106.54 is a plug-in night light designed to provide soft, ambient illumination in dark areas. It features a compact design, energy-efficient LED light source, automatic light sensor for dusk-to-dawn operation, and a child-safe plug. Below are key sections for safety, features, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Safety Features 7. Care & Cleaning 8. Regulatory Information 9. Troubleshooting

Features at a Glance

Key components: LED light module, light sensor, plug-in housing, and translucent cover.

Feature	Description
LED Light Source	Energy-efficient, long-lasting illumination
Automatic Light Sensor	Turns light on at dusk and off at dawn
Plug-in Design	Directly plugs into standard wall outlet
Child-Safe Plug	Rounded pins and safety shutters
Compact Size	Discreet design that doesn't block adjacent outlet
Soft Glow	Provides gentle light for hallways, bedrooms, or bathrooms

Installation

Unpack and inspect contents. Ensure the outlet is easily accessible and not behind furniture.

Choose location: Select a standard wall outlet in a dark area that needs ambient light.
Check outlet: Ensure the outlet is functioning and not controlled by a switch.
Plug in: Insert the night light firmly into the outlet until it's secure.
Test operation: Cover the light sensor with your hand to simulate darkness; the light should turn on.

WARNING! Do not force the plug. Ensure the outlet is not overloaded. Keep away from water sources.

First-Time Setup

The night light is ready to use immediately after installation.

Plug the night light into a standard 120V AC outlet.
The light sensor will automatically detect ambient light levels.
In darkness, the LED will illuminate automatically.
At dawn, or when sufficient ambient light is detected, the LED will turn off.

CAUTION! Do not install in enclosed fixtures or cover the light sensor. Ensure proper ventilation.

Specifications

Model: SNÖDJUP 705.106.54
Light Source: Integrated LED
Sensor: Built-in photocell for automatic operation
Power Consumption: 0.5W (approx.)
Input Voltage: 120V AC, 60Hz
Plug Type: NEMA 1-15P (2-pin, non-polarized)
Color Temperature: Warm White (2700K)
Dimensions: Compact design (specific dimensions vary)
Operating Temperature: Standard indoor conditions

Controls and Operation

The night light operates automatically with no manual controls required.

Automatic Mode: The built-in light sensor continuously monitors ambient light. When darkness is detected, the LED turns on. When sufficient light is present, the LED turns off.

Manual Override: There is no manual on/off switch. To turn the light off, unplug it from the outlet.

Indicator: No separate indicator light. The main LED serves as both light source and operation indicator.

Safety Features

Child-Safe Plug: Designed with safety shutters and rounded pins to prevent electrical shock.

Overheat Protection: Built-in thermal protection to prevent overheating.

Low Voltage Operation: The LED module operates at low voltage for enhanced safety.

Important: Do not attempt to disassemble the unit. Contains no user-serviceable parts.

Care & Cleaning

Unplug the night light before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquids, cleaners, or abrasives.

CAUTION! Do not immerse in water or other liquids. Ensure the unit is completely dry before plugging back in.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © IKEA. For support, visit www.ikea.com or contact your local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	No power to outlet / Faulty outlet	Plug another device into the outlet to test. Try a different outlet.
Light stays on during the day	Light sensor blocked or faulty	Ensure sensor is not covered by furniture or dirt. Clean sensor area gently.
Light flickers	Loose connection / End of life	Ensure plug is fully inserted. If problem persists, replace unit.
Light is dim	LED nearing end of life	LEDs have a long lifespan; dimming may indicate replacement is needed.
Unit feels warm	Normal operation	Slight warmth is normal. If excessively hot, unplug immediately.

Replacement: The LED light source is not replaceable. If the unit fails, replace the entire night light.

Service: For warranty or support, contact IKEA customer service or visit www.ikea.com.