IKEA SNIGLAR 191.854.33 Bed Frame instructions manual

The IKEA SNIGLAR 191.854.33 is a solid wood bed frame designed for durability and stability. It features a classic Scandinavian design, slatted bed base for mattress support, and is suitable for standard single/twin mattresses. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts and Tools Included 2. Safety Information 3. Step-by-Step Assembly 4. Specifications 5. Care and Maintenance 6. Troubleshooting 7. Warranty and Support

Parts and Tools Included

All parts needed for assembly are included in the package. Please verify contents before starting.

Part NumberDescriptionQuantity
100001Side rail (long)2
100002Headboard1
100003Footboard1
100004Bed slat (center support)1
100005Bed slat (standard)14
200001Wooden dowel12
200002Cam lock8
300001Allen key (included tool)1
300002Wood screw16
300003Plastic washer8

Safety Information

Read all instructions before assembly. Ensure a safe working environment.

  1. Assemble on a soft surface (carpet/blanket) to prevent scratches.
  2. Use two people for assembly; frame is heavy.
  3. Keep small parts away from children to avoid choking hazard.
  4. Tighten all screws and cam locks securely.

WARNING! Do not exceed maximum weight limit of 220 lbs (100 kg) per sleeping surface. Ensure bed is on level floor.

Step-by-Step Assembly

Follow these steps in order. Estimated assembly time: 45-60 minutes.

  1. Prepare Parts: Lay out all parts as shown in diagram. Identify headboard (taller) and footboard.
  2. Attach Side Rails: Insert wooden dowels into ends of side rails. Align with holes in headboard and footboard. Join and tighten with cam locks using Allen key.
  3. Install Center Support: Place center support slat (part 100004) in middle of frame. Secure with provided screws.
  4. Add Bed Slats: Place remaining 14 slats evenly across frame, resting on side rails and center support.
  5. Final Check: Ensure all cam locks are fully tightened (flush with surface). Check stability by gently shaking frame.

CAUTION! Do not overtighten screws; may strip wood. Assemble in intended room; frame may not fit through door once assembled.

Specifications

Care and Maintenance

To maintain appearance and longevity of your bed frame.

  1. Cleaning: Wipe with dry or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners.
  2. Protection: Avoid direct sunlight and heat sources to prevent wood from drying out.
  3. Tightening: Check screws and cam locks every 3-6 months; retighten if loose.
  4. Staining/Treating: If desired, apply wood stain or sealant suitable for pine. Test on hidden area first.

Tip: Use felt pads under legs to protect flooring and reduce noise.

Troubleshooting

IssuePossible CauseSolution
Bed frame wobblesLoose cam locks/screwsTighten all cam locks and screws with Allen key.
Slats sliding outNot properly seatedEnsure slats rest fully on rails; reposition evenly.
Squeaking noiseWood friction or loose jointsTighten connections; apply candle wax or soap to rubbing points.
Difficulty assemblingMisaligned dowelsDisassemble step; ensure dowels are fully inserted before tightening.
Wood splinter/crackOvertightening or defectContact IKEA support for replacement part if within warranty.

Note: Do not use power tools for assembly; may damage wood.

Warranty and Support

IKEA limited warranty: 10 years from date of purchase. Covers manufacturing defects in materials. Does not cover damage from improper assembly, accidents, or normal wear.

For missing parts, assembly help, or warranty claims:

Recycling: Wood is recyclable. Disassemble and dispose according to local regulations.

IKEA SNIGLAR 191.854.33 Bed Frame instructions manual © - All Rights Reserved 2025