IKEA SNÖBYAR 404.598.45 Table Lamp instructions manual

The IKEA SNÖBYAR 404.598.45 is a modern table lamp designed for ambient lighting, featuring a clean aesthetic, energy-efficient LED bulb (included), touch or switch control (model dependent), adjustable brightness levels, and a stable base. Suitable for desks, bedside tables, or living rooms. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Package Contents & Tools Needed 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Controls & Operation 6. Light Source & Replacement 7. Placement & Usage Tips 8. Care & Cleaning 9. Warranty & Support 10. Troubleshooting

Package Contents & Tools Needed

Before assembly, verify all parts are present and undamaged.

Item	Quantity	Description
Lamp base	1	Main weighted base unit
Lamp stem/column	1	Vertical support pole
Lamp shade	1	Fabric or plastic diffuser
LED bulb	1	Integrated or separate (E12/E26 base)
Mounting hardware	1 set	Screws, washers, nut (if required)
Instruction manual	1	This document

Tools you may need: No tools required for most models (hand-tighten). Phillips screwdriver if screws included.

Safety Information

Read all instructions before assembly and use.

Electrical Safety: Use only with 120V AC, 60Hz outlet. Do not overload circuit.
Bulb Compatibility: Use only LED bulb with max wattage as specified. Do not use higher wattage bulbs.
Placement: Place on stable, flat, dry surface away from edges. Keep away from water, heat sources, and flammable materials.
Cords: Do not pinch or run under carpets. Unplug before cleaning or bulb replacement.
Children: Keep out of reach of young children. Not a toy.

WARNING! Risk of electric shock or fire if misused. Do not disassemble beyond instructions.

Assembly Instructions

Follow steps in order. Assembly typically takes 5-10 minutes.

Prepare workspace: Clear area, lay out all parts.
Attach stem to base: Insert stem into base hole. Hand-tighten locking nut or screw underneath (if provided). Ensure secure.
Install bulb: Screw LED bulb into socket (if not pre-installed). Do not overtighten.
Attach lampshade: Place shade over bulb. Secure with finial (screw-on top) or clip mechanism, depending on model.
Final check: Ensure all parts are firmly attached, no loose components. Plug into outlet.

Tip: If shade is fabric, handle gently to avoid tearing.

Specifications

Model: SNÖBYAR 404.598.45
Dimensions (approx.): Height: 12-16 inches; Base diameter: 5-7 inches.
Weight: 2-3 lbs (assembled).
Light Source: Integrated or replaceable LED, 300-500 lumens, 2700K-3000K (warm white).
Bulb Base: E12 (candelabra) or E26 (standard) – check label.
Max Wattage: 9W LED (equivalent to 60W incandescent).
Power Supply: 120V AC, 60Hz.
Control Type: Touch-sensitive base, rotary switch, or pull-chain (model dependent).
Materials: Base: Metal/ceramic; Shade: Fabric, plastic, or glass.
Color Options: White, black, or multi-color as per packaging.

Controls & Operation

Operation varies by control type.

Touch Control: Gently touch metal base or designated area to turn on/off. Touch and hold to dim/brighten (if dimmable).

Switch Control: Turn knob or flip switch on cord/base to ON/OFF positions.

Pull-Chain: Pull chain to toggle ON/OFF.

Dimmable Models: Use compatible dimmer switch (if separate) or touch-hold function. Not all models are dimmable.

Note: Allow lamp to cool before touching shade after extended use.

Light Source & Replacement

Uses energy-efficient LED for long life.

When to replace: Light flickers, dims significantly, or fails to turn on.
Replacement steps: Unplug lamp. Let cool. Remove shade (unscrew finial or unclip). Unscrew old bulb. Screw in new compatible LED bulb (check base type and max wattage). Reattach shade.
Disposal: Dispose of old LED bulbs according to local regulations (do not throw in regular trash if prohibited).

CAUTION! Never use bulb exceeding specified wattage. Do not touch LED components with bare hands; use cloth if needed.

Placement & Usage Tips

For optimal performance and ambiance.

Place on stable surface like nightstand, desk, or side table.
Ensure cord is not a tripping hazard; use cord organizer if needed.
Use for ambient lighting, reading (if bright enough), or accent lighting.
Do not place where shade may contact curtains or other fabrics.
For touch models, ensure base is clean and dry for reliable operation.

Tip: Pair with other SNÖBYAR series lamps for coordinated lighting.

Care & Cleaning

Regular cleaning maintains appearance and safety.

Unplug lamp and allow to cool completely.
Base/Stem: Wipe with dry or slightly damp cloth. Do not use abrasive cleaners.
Shade: Dust with soft brush or dry cloth. For fabric shades, vacuum gently with brush attachment. Do not immerse in water.
Bulb: Clean with dry cloth only when cool.

WARNING! Never use liquids, sprays, or chemicals directly on lamp. Do not submerge any part.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or receipt for details.

Warranty Period: Typically 1-5 years depending on region and component (e.g., LED light source may have separate warranty).

Coverage: Defects in materials and workmanship under normal household use.

Support: For missing parts, assembly help, or warranty claims:

Visit: www.ikea.com
Contact local IKEA store: See receipt for details.
Phone (US): 1-888-888-4532

Note: Keep receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / bulb faulty / outlet issue	Check plug; try different outlet; replace bulb.
Touch control unresponsive	Dirty base / not touching correctly	Clean base with dry cloth; touch firmly at correct spot.
Flickering light	Loose bulb / failing LED / dimmer incompatibility	Ensure bulb tight; replace bulb; if dimmable, check compatibility.
Lamp wobbles	Base not secure / uneven surface	Tighten stem-to-base connection; place on flat surface.
Overheating	Wrong bulb wattage / blocked vents	Use correct LED wattage; ensure shade not blocking heat dissipation.
Shade loose or crooked	Finial not tight / clips misaligned	Turn finial clockwise to tighten; realign shade clips.

Reset: Unplug for 30 seconds, then replug.

Service: For electrical issues, contact qualified electrician. Do not attempt internal repairs.