The IKEA SMÅSTAD 094.288.37 is a versatile storage bench designed for home entryways, bedrooms, or living areas. It combines seating with hidden storage space, featuring a lift-up seat, sturdy construction, and a clean, modern design. Below are key sections for safety, parts list, assembly instructions, use, care, and warranty information.
Important warnings and precautions for safe assembly and use.
| Warning | Description |
|---|---|
| Weight Limit | Do not exceed the maximum load capacity of 220 lbs (100 kg). |
| Assembly Surface | Assemble on a soft, clean surface to avoid scratching parts. |
| Child Safety | Keep small hardware away from children during assembly. Ensure the lid closes softly and has a safety hinge to prevent finger pinching. |
| Tool Use | Use only the included Allen key. Do not overtighten screws. |
| Stability | Assemble on a level floor. Do not place on uneven or slippery surfaces. |
Check that you have all parts before starting assembly. Contact IKEA if any parts are missing.
IMPORTANT! Identify all parts using the included illustration sheet. Do not discard packaging until assembly is complete.
Follow these steps in order. Allow approximately 30-45 minutes for assembly.
CAUTION! Two people are recommended for attaching the lid to avoid injury and ensure proper alignment.
Your SMÅSTAD bench is designed for multi-purpose storage and seating.
Storage: Lift the lid to access the spacious interior. Ideal for shoes, bags, toys, or blankets.
Seating: The sturdy lid is designed for sitting. Ensure the lid is fully closed before sitting.
Lid Support: The hinge mechanism will hold the lid open while you access storage. Do not force the lid beyond its stopping point.
Placement: For best stability, place against a wall. Avoid placing in direct sunlight or high-humidity areas like bathrooms.
Clean with a damp cloth wrung out in a mild soap solution. Wipe dry immediately.
DO NOT use abrasive cleaners, scouring pads, or solvents as they can damage the surface.
Periodically check that all screws and cam locks are tight. Re-tighten if necessary using the provided Allen key.
| Issue | Possible Cause | Solution |
|---|---|---|
| Bench wobbles | Uneven floor or loose connections | Check that all cam locks and screws are fully tightened. Place on a level surface. |
| Lid is difficult to open/close | Hinges misaligned or need lubrication | Check hinge alignment per step 6. Apply a small amount of furniture wax (not oil) to hinge pivot points. |
| Gaps between panels | Cam locks not fully engaged | Disassemble the affected joint and re-engage the cam lock, turning it a full 90 degrees until tight. |
| Scratches on surface | Assembly on hard surface or accidental damage | Use touch-up paint (available at IKEA) for minor scratches. Assemble on a carpet or blanket. |
This IKEA product is covered by a limited warranty. Refer to the IKEA warranty booklet included in the package or available at IKEA stores for full terms and conditions.
For assembly help, missing parts, or other support:
Recycling: At end of life, disassemble and recycle materials according to local regulations.