IKEA SMÅSTAD 093.922.06 Table instructions manual

The IKEA SMÅSTAD 093.922.06 is a versatile and sturdy table designed for home or office use. It features a clean, modern design, durable construction, and easy assembly. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Tools Included 2. Safety Instructions 3. Step-by-Step Assembly 4. Specifications 5. Care & Maintenance 6. Troubleshooting 7. Warranty & Support

Parts & Tools Included

Before assembly, check that all parts are present and undamaged.

Part NumberDescriptionQuantity
ATable Top1
BTable Legs4
CMetal Frame1
DScrews (Type A)16
EScrews (Type B)8
FAllen Key1
GPlastic Caps8

Note: The Allen key is included in the package. No other tools are required.

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

  1. Work Area: Assemble on a soft, clean surface to avoid scratches.
  2. Lifting: The table top is heavy; use two people to lift and position it.
  3. Tightening: Do not overtighten screws; this may damage the material.
  4. Stability: Ensure all legs are firmly attached before using the table.
  5. Weight Limit: Do not exceed the maximum load of 50 kg (110 lbs).

WARNING! Failure to follow these instructions may result in injury or damage to the product.

Step-by-Step Assembly

Follow these steps in order. Estimated assembly time: 30 minutes.

  1. Step 1: Lay the table top (A) upside down on a protected surface.
  2. Step 2: Attach the metal frame (C) to the underside of the table top using the provided Type A screws (D). Tighten with the Allen key.
  3. Step 3: Screw the four table legs (B) into the corners of the metal frame using the Type B screws (E). Ensure they are straight and fully tightened.
  4. Step 4: Carefully turn the table right-side up. Place it in its desired location.
  5. Step 5: Insert the plastic caps (G) into the visible screw holes on the legs for a finished look.
  6. Step 6: Check that the table is stable and does not wobble. If it wobbles, adjust the leg tightness or place on a level surface.

Tip: Do not fully tighten any screw until all screws for that part are started. This allows for minor adjustments.

Specifications

Care & Maintenance

Proper care will extend the life and appearance of your table.

  1. Cleaning: Wipe the surface with a soft, damp cloth. Dry immediately with a clean cloth.
  2. Stains: For stubborn stains, use a mild soap solution. Never use abrasive cleaners, scouring pads, or solvents.
  3. Protection: Use coasters under glasses and hot pads under hot dishes to prevent marks and heat damage.
  4. Moisture: Avoid prolonged exposure to moisture or direct sunlight, which may cause warping or fading.
  5. Tightening: Periodically check and tighten screws if the table becomes loose.

CAUTION! Do not drag the table across the floor. Lift it to move.

Troubleshooting

ProblemPossible CauseSolution
Table wobblesUneven floor; Legs not tightened equallyPlace on a level surface. Check and re-tighten all leg screws.
Screw won't tightenCross-threaded or stripped holeDo not force. Back the screw out and restart it straight. If hole is stripped, contact IKEA support.
Scratches on surfaceAssembly on hard surface; Rough handlingAssemble on a soft blanket. Minor scratches can be touched up with a matching wood marker.
Part missing or damagedPackaging error; Shipping damageDo not assemble. Keep all packaging and contact IKEA customer service for replacement parts.
Leg feels looseScrew not fully tightenedUse the Allen key to firmly tighten the screw connecting the leg to the frame.

Warranty & Support

This IKEA product is covered by the IKEA commercial warranty. Refer to the IKEA warranty leaflet included in the package or visit www.IKEA.com for full terms and conditions.

Important: Retain this manual and your proof of purchase for warranty service.

IKEA SMÅSTAD 093.922.06 Table instructions manual © - All Rights Reserved 2025